• 한국강구조학회 논문집
• /
• 제23권1호
• /
• pp.41-49
• /
• 2011

폭이 8m이상인 광폭형 비닐하우스는 농기구 사용의 편리성과 토지 활용성 등의 장점이 부각되면서 농가에 점차 보급되고 있는 실정이다. 이 논문은 광폭형 비닐하우스의 인장타이보강에 따른 효과에 관한 실험결과를 제공한다. 이미 앞선 연구에서는 농촌진흥청에서 고시된 폭이 6.5m인 단동형 비닐하우스 모델을 선정하여 인장타이보강효과에 대한 실험을 수행한바 있다. 본 연구에서는 ${\phi}48.1{\times}2.1$ 단면, 폭이 10.2m인 광폭형 비닐하우스를 선정하여 대칭하중 가력실험과, 햇빛에 의한 열이나 바람에 의한 불균형 적설하중을 산정한 편심하중 가력실험을 수행하였다. 타이를 보강하지 않은 실험체와 인장타이를 보강한 실험체의 하중-변위 관계를 비교 분석하였다. 대칭하중 가력실험에서 인장타이로 보강되어진 모델은 내력이 68~93%정도 증가하였다. 파괴모드는 무보강시에는 sway붕괴 메카니즘이 일어났으나 타이 보강시에는 아치 좌굴 메카니즘이 일어났다. 편심하중 가력실험 결과 타이로 보강하였을 경우 내력이 10~20%정도 증가하였다. 파괴모드는 무보강시에는 조합 붕괴 메카니즘이 일어났지만 타이보강시에는 아치 좌굴 메카니즘이 일어났다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.145-152
• /
• 2005

This paper presents a deformable strut-and-tie model of determining the shear strengths and ultimate deformations of the shear-dominant reinforced concrete members. The proposed model originates from the strut-and-tie model concept and satisfies equilibrium, compatibility, constitutive laws, and the geometric conditions of shear deformation. This study attempts to apply deformation patterns to strut-and-tie models. The yielding of flexural reinforcements determines yielding states and the ultimate states of reinforced concrete coupling beam are defined as the ultimate compressive strain of struts and the degradation of compressive strength due to principal tensile strain of struts. The validity and accuracy of the proposed model is then tested against available experimental data. The parameters reviewed include the ratios of truss action and arch action, the reinforcement ratios, and the shear span-depth ratio. It is expected that this model can be applied to displacement-based design methods.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.139-142
• /
• 2005

This paper presents a deformable strut-and-tie model of determining the shear strengths and ultimate deformations of the shear-dominant reinforced concrete members. The proposed model originates from the strut-and-tie model concept and satisfies equilibrium, compatibility, constitutive laws, and the geometric conditions of shear deformation. This study attempts to apply deformation patterns to strut-and-tie models. The yielding of flexural reinforcements determines yielding states and the ultimate states of reinforced concrete coupling beam are defined as the ultimate compressive strain of struts and the degradation of compressive strength due to principal tensile strain of struts. The validity and accuracy of the proposed model is then tested against available experimental data. The parameters reviewed include the ratios of truss action and arch action, the reinforcement ratios, and the shear span-depth ratio. It is expected that this model can be applied to displacement-based design methods.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권2호
• /
• pp.355-370
• /
• 2014

Cooperative spectrum sensing has been considered as a promising approach to improve the sensing performance in distributed cognitive radio networks. However, there may exist some selfish secondary users (SUs) who are unwilling to cooperate. The presence of selfish SUs could cause catastrophic damage to the performance of cooperative spectrum sensing. Following the social perspective, we propose a Social Tie-based Incentive Scheme (STIS) to deal with the selfish problem for cooperative spectrum sensing in distributed cognitive radio networks. This scheme inspires SUs to contribute sensing information for the SUs who have social tie but not others, and such willingness varies with the strength of social tie value. The evaluation of each SU's social tie derives from its contribution for others. Finally, simulation results validate the effectiveness of the proposed scheme.

• Computers and Concrete
• /
• 제4권4호
• /
• pp.259-272
• /
• 2007

A method based on the lower-bound theorem of limit analysis is presented for the capacity assessment of nodal zones in strut-and-tie models. The idealized geometry of the nodal zones is formed by the intersection of effective widths of the framing struts and ties. The stress distribution is estimated by dividing the nodal zones into constant stress triangles separated by lines of stress discontinuity. The strength adequacy is verified by comparing the biaxial stress field in each triangle with the corresponding failure criteria. The approach has been implemented in a computer-based strut-and-tie tool called CAST (Computer-Aided Strut-and-Tie). An application example is also presented to illustrate the approach.

• Structural Engineering and Mechanics
• /
• 제33권3호
• /
• pp.357-371
• /
• 2009

Test results of thirteen reinforced concrete corbels with shear span-to-depth ratio greater than unity are reported. The main variables studied were compressive strength of concrete, shear span-to-depth ratio and parameter of vertical stirrups. The test results indicate that the shear strengths of corbels increase with an increase in compressive strength of concrete and parameter of vertical stirrups. The shear strengths of corbels also increase with a decrease in shear span-to-depth ratio. The smaller the shear span-to-depth ratio of corbel, the larger the stiffness and the shear strength of corbel are. The higher the concrete strength of corbel, the higher the stiffness and the shear strength of corbel are. The larger the parameter of vertical stirrups, the larger the stiffness and the shear strength of corbel are. The softened strut-and-tie model for determining the shear strengths of reinforced concrete corbels is modified appropriately in this paper. The shear strengths predicted by the proposed model and the approach of ACI Code are compared with available test results. The comparison shows that the proposed model can predict more accurately the shear strengths of reinforced concrete corbels than the approach of ACI Code.

• Computers and Concrete
• /
• 제22권3호
• /
• pp.279-289
• /
• 2018

Shear walls are one of the important structural elements for bearing loads imposed on buildings due to winds and earthquakes. Composite shear walls with high lateral resistance, and high energy dissipation capacity are considered as a lateral load system in such buildings. In this paper, a composite shear wall consisting of steel faceplates, infill concrete and tie bars which tied steel faceplates together, and concrete filled steel tubular (CFST) as boundary columns, was modeled numerically. Test results were compared with the existing experimental results in order to validate the proposed numerical model. Then, the effects of some parameters on the behavior of the composite shear wall were studied; so, the diameter and spacing of tie bars, thickness and compressive strength of infill concrete, thickness of steel faceplates, and the effect of strengthening the bottom region of the wall were considered. The seismic behavior of the modeled composite shear wall was evaluated in terms of stiffness, ductility, lateral strength, and energy dissipation capacity. The results of the study showed that the diameter of tie bars had a trivial effect on the performance of the composite shear wall, but increasing the tie bars spacing decreased ductility. Studying the effect of infill concrete thickness, concrete compressive strength, and thickness of steel faceplates also showed that the main role of infill concrete was to prevent buckling of steel faceplates. Also, by strengthening the bottom region of the wall, as long as the strengthened part did not provide a support performance for the upper part, the behavior of the composite shear wall was improved; otherwise, ductility of the wall could be reduced severely.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.41-44
• /
• 2004

This experimental investigation was conducted to examine the behaviour of eight one-third scale columns made of high-strength concrete (HSC). The columns were subjected to a constant axial load corresponding to 30 per cent of the column axial load capacity and a cyclic horizontal load-inducing reversed bending moment. The variables studied in this research are the volumetric ratio of transverse reinforcement, tie configuration and tie yield strength. Columns with 42 per cent higher amounts of transverse reinforcement than that required by seismic provisions of ACI 318-02 showed ductile behaviour. Relationships between the calculated damage index and the observed damage such as initial crack, spalling of concrete, buckling of longitudinal bar, and crushing of concrete are propose.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.397-402
• /
• 2003

This paper presents strut-and-tie models for predicting shear strength of RC interior beam-column joints considering the plastic hinge rotation of adjacent beams. On seismic design of frame system, it is controlled beams to occur plastic hinges and to be ductile so as to dissipate earthquake energy efficiently. The plastic hinge deformation of beams is used as analysis parameter in terms of strain of beam tensile bars at column face. The shear strengths of beam-column joints are evaluated by combining direct strut mechanism with truss mechanism. It is assumed that the max force transferred by direct strut mechanism is based on the strength of cracked concrete element, and that by truss mechanism is based on bond capacity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.979-984
• /
• 2008

본 연구는 실용적인 적용을 위한 기본적인 스트럿-타이 모델의 사용방법에 대해 논의한다. 스트럿- 타이 모델의 구성은 평형 조건식에 기초한 하중 경로를 그리는 것으로 시작한다. active sytems, vector active systems, 그리고 section active systems를 포함한 구조 시스템의 이해는 가능한 스트럿 -타이 모델을 위한 적절한 시스템을 선택할 수 있도록 한다. 간단한 원형 fan은 집중하중에서부터 분포하중까지 하중 경로를 표시할 수 있다. 스트럿의 강도는 인장 타이와 유효 압축 강도가 만나는 절점영역의 형태에 따라 결정된다. 스트럿의 유효 압축강도는 주로 transevers 변형률에 의해 영향을 끼치는 것으로 가정한다.