• Korean Journal of Plant Taxonomy
• /
• v.39 no.1
• /
• pp.4-11
• /
• 2009

Anatomical features of both leaves and stems of the four mistletoes in Korea (Viscum album var. coloratum, Korthalsella japonica, Loranthus yadoriki, L. tanaka) and of their secondary haustorial structure within several host plants were investigated. Among the four mistletoes, there were diagnostic characters of the anatomy of leaves and stems which enabled us to distinguish the four taxa. Leaves were observed to have three distinct characters including unifacial or bifacial leaves, the number of vascular bundles in the midveins, and the level of development of sclerenchyma cells. There were four diagnostic characters of stems: overall morphology of stems in transverse view, degree of cuticle development, arrangement of vascular bundles, and features of the sclerenchyma and pith. In order to determine secondary haustorial traits, the research focused on the seven host plants of L. yadoriki and on the five host plants of K. japonica. The following features were found to be important: presence or absence of an aerial runner root, the shape of the haustorial strand and flange, the degree of penetration into host tissues, and their development of shaft in transverse view, the development both of secondary haustorial cells and short tracheid in hyphae. Korthalsella japonica and L. yadorki were clearly distinguished by these characters. The secondary haustorial forms in each host were somewhat different, due to varying degrees of development in the strength of the host plants' wood. However, qualitative characters like the final position of the secondary haustorial penetration into host tissues and the development of short tracheid cells were not only affected by the degree of development of the host plants, but also useful for the systematic study.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.199-208
• /
• 2009

This study was conducted to investigate the effects of dietary silicate minerals on ammonia emission from the excreta and performance in laying hens. A total of one thousand and twenty 49 week-old Lohmann brown layers were divided into three treatment groups consisting two replicates of 170 birds each. The experimental diets were containing three kinds of silicate minerals (Sand, Na-bentonite and SY feldspar) added at the level of 2% by top-dressing. Ammonia emission from the excreta was significantly decreased (p<0.05) by the supplementation of Na-bentonite or SY feldspar. N concentration of the excreta was significantly higher (p<0.05) for the hens fed Na-bentonite or SY feldspar compared to those fed sand. However, no significant differences were observed in feed intake and laying performance with over 80% laying rate observed for all the treatments. Egg shell strength was diminished when SY feldspar was added to the diet. As a whole, the results obtained from the experiment indicated that supplementation of Na-bentonite or SY feldspar added at 2% to the laying hen diet should not affect laying performance but help to reduce ammonia from the excreta at the same time.

• The Journal of Engineering Geology
• /
• v.30 no.1
• /
• pp.31-42
• /
• 2020

Electrical resistivity and downhole seismic surveys were conducted together with bore investigations and well-logging to examine subsurface structures in small-scale landslides at Sinjindo-ri, Geunheung-myeon, Taean-gun, Chungcheongnam-do, Republic of Korea in 2014. On the basis of the low N-values at depths of 5~7 m in borehole BH-2, downhole seismic and electrical dipole-dipole resistivity surveys were performed to delineate geological weak zones. The low-resistivity zones (<150 Ω·m) measure ~8 m in thickness and show a close depth correspondence to weathered soils consisting mainly of silty clays as identified from the bore investigations and well-logging data. Compared with weak zones in borehole BH-1, weak zones in BH-2 are characterized by lower densities (1.6~1.8 g/㎤) and resistivities (<150 Ω·m) and greater variation in Poisson's ratio. These observations can be explained by the presence of wet silty clays rich in weathered soil material that have resulted from heavy rainfall and rises in groundwater level. Downslope movements are probably caused by the sliding of wet clay that acts to reduce the strength of the weathered soil.

• Korean Journal of Poultry Science
• /
• v.30 no.1
• /
• pp.61-66
• /
• 2003

This study was conducted to investigate the effects of dietary germanium biotite supplementation on egg quality and fecal noxious gas content in laying hens. One hundred and forty-four 40-wk-old, ISA Brown layers were used in this experiment. Dietary treatments were 1) CON(control diet), 2) GB0.5(control diet + 0.5% germanium biotite), 3) GB1.0 (control diet + 1.0% germanium biotite) and 4) GB1.5(control diet + 1.5% germanium biotite). Hen-day egg Production and egg shell breaking strength were not influenced by germanium biotite supplementation. However, egg weight decrease as the level of germanium biotite supplementation increased in the diets increased(Cubic effect, p<0.02). Eggshell thickness, yolk color and yolk index were not influenced by garmanium biotite supplementation. Serum triglyceride concentration as dietary germanium biotite increased (linear effect P<0.02; quadratic effect, p<0.05). Dietary supplementation of germanium biotite reduced fecal NH$_3$-N concentration (P<0.01), propionic acid(P<0.01), butyric acid( P<0.05) and acetic aicd(P<0.01) concentrations in the feces. In conclusion, the results of this experiment indicated that dietary germanium biotite supplementation did not affect egg shell quality, but reduced fecal NH$_3$-N concentration.

• Tunnel and Underground Space
• /
• v.17 no.5
• /
• pp.389-410
• /
• 2007

For moderately jointed to massive rock masses, the failure and deformation behaviors around an excavated opening are absolutely influenced by the initial rock stress and strength of in-situ rock mass. The localized and progressive brittle failure around an opening does not mean whole collapse of an excavated opening. But, for many cases, it may induce temporary stopping of excavation works and reexamination of the current supporting system, which can result in delay of the entire construction works and additional construction cost. In this paper, the characteristics of the brittle failure around an opening with stress level and tunnel shape was studied by the biaxial compressive test using scaled specimen and by the numerical simulation with $PFC^{2D}$. The biaxial test results were well coincided with the stress induced failure patterns around the excavated openings observed and monitored in the in-situ condition. For the circular part of the opening wall, the stress induced cracks initially occurred at the wall surface in the direction of the minimum principal stress and contributed to the localized notch shaped failure region having a certain range of angle. But for the corner and straight part of the opening wall, the cracks initiated at sharp corners were connected and coalesced each other and with existing micro cracks. Further they resulted in a big notch shaped failure region connecting two sharp corners.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.4
• /
• pp.155-168
• /
• 2011

Coastal boundary current flows along the eastern boundary of the Yellow Sea and its speed was about 0.l m/s during the summer 2007. In order to find major factors that affect the coastal boundary current in the eastern Yellow Sea, three-dimensional numerical model experiments were performed. The model simulation results were validated against hydrographic and current meter data in the eastern Yellow Sea. The eastern boundary current flows along the bottom front over the upper part of slopping bottom. Strength and position of the current were affected by tides, winds, local river discharge, and solar radiation. Tidal stirring and surface wind mixing were major factors that control the summertime boundary currents along the bottom front. Tidal stirring was essential to generate the bottom temperature front and boundary current. Wind mixing made the boundary current wider and augmented its north-ward transport. Buoyancy forcing from the freshwater input and solar radiation also affected the boundary current but their contributions were minor. Strong (weak) tidal mixing during spring (neap) tides made the northward transport larger (smaller) in the numerical simulations. But offshore position of the eastern boundary current's major axis was not apparently changed by the spring-neap cycle in the mid-eastern Yellow Sea due to strong summer stratification. The mean position of coastal boundary current varied due to variations in the level of wind mixing.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.4 s.54
• /
• pp.9-18
• /
• 2004

In this study, the observation data for the yellow sandy dust phenomena from the year 1999 to 2003 at background sites in Korea were collected at Global Atmospheric Observatory at An-Myeon island and its temporal variation were analyzed. The chemical characteristics of the fine particles were also analyzed in order to evaluate sources of the yellow sandy dust particles. The results showed that the monthly average mass concentration of the fine particles was the highest in springtime and the lowest in summertime in general. The magnitude of its variation was also the highest in March in which the occurrence of yellow sandy dust was the most frequent and thus the number of samples was the largest, while the lowest in June through September. The yearly variation of ion components contributions to the total mass concentration of the fine particles was slowly decreasing, showing that $63\%$ in 1999, $59\%$ in 2000 and $56\%$ in 2003. The most prevalent ion components in the fine particles were found to be $NO_3$ and $SO_4^{2-}$, which are known to be source materials of acidic precipitation, and $NH_4^+$, a neutralizing material of the acid precipitation. Relative proportion of metal components in the fine particles was calculated as $14\%$ in average, and their concentrations are in an order of Fe > Al > Na > Ca > Zn > Pb > Cu > Mn > Ni > Cd > Cr > Co > U. The results indicated that main sources of the metals was soil-originated Fe, Al, Ca, and Mg, and the contribution of anthropogenic air Pollution-originated Zn, Pb, Cu, Mn were also high and keep slightly increasing. Statistical analysis showed that the chemical components could be divided into soil-originated group of Mg, Al, Ca, Fe, and Mn and air pollution-originated group of $NO_3$, Zn, Pb, and they are occupying more than $60\%$of all the components in the dusty sand. The results explain that An-Myeon island is more influenced by soil-originated source than ocean-originated one and also the influencing strength of anthropogenic poilution-originated source is less than $50\%$ of that of soil-originated sources. Compared to non-yellow sandy period, the yellow sandy dust period showed that the amounts of soil-originated $Mg^{2+}$ and $Ca^{2+}$ and ocean-originated $Na^+$ and $Cl^-$ were increased to more than double and the metals of Mg, Al, Ca, Fe were also highly increased, while micro metal components such as Pb, Cd, Zn, which have a tendency of concentrating in air, were either decreased or maintained at nearly constant level. In the period of yellow sandy dust, a strong positive correlation was observed between water soluble ions and between metals in terms of its concentration, respectively. Factor analysis showed that the first group being comprised of about $43\%$ of the total inorganic components was affected by soil and they are ions of $Na^+,\;Mg^{2+}\;and\;Ca^{2+}$ and metals of Na, Fe, Mn and Ni. The result also showed that the metals of Mg and Cr were classified as second group and they were also highly affected by soil sources.

• Communications for Statistical Applications and Methods
• /
• v.16 no.4
• /
• pp.627-637
• /
• 2009

Our economic system highly depends on the international trade market and demands high level of foreign language abilities to the young generation. Scores of various internationally authorized language tests are used to estimate students's language ability before giving their admission to universities or high schools. According to increase of unemployment rate of the young people, universities put their strength on the language abilities of their students, and each university uses some authorized language scores before determining students who win scholarships. This study suggests two types of indices to evaluate students's relative achievement of foreign language abilities between two time points considering their current abilities. One, named one-side relative achievement index, is defined as the ratio of additional score between two time points to the remaining score at the base time point to the full score. The second one, named two-side relative achievement index, is defined as the same manner as the first one if the score is improved, and if not, is defined as the ratio of the amount of losing scores to the current score at the base time point. Two-side achievement index is more useful since it has smaller variation than the former and is easier to interpret. However, both indices are useful to compare the achievements of different tests.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.3 s.32
• /
• pp.363-375
• /
• 1997

This study encompasses the performance of static and fatigue test for the 8 large scale test specimens to clarify the fatigue behavior of coped stringer and the effect of the repair and strengthening on the damaged stringer of the floor system in steel railway bridges. For the purpose of the research, the actual stress wave for the existing bridge was measured, the basic stress range frequency histogram was made and the equivalent stress range was calculated. Using the result from the equivalent stress range made by adjusting the stress range, the static and fatigue test was carried out by identifying the previous rehabilitation and after. As the result of the static tests, it was revealed that the level of local stress under the S1 specimen test of the real equivalent stress range was similar to tensile strength of the test material, and it was consistent with the requirement of the initiation condition of the fatigue crack. Through the various rehabilitation methods to the damaged specimens, the effects of the repair and reinforcement were analyzed. According to the results of the repair of effect, bolting the high tension bolt over the stop hole was confirmed to be more adequate method than drilling only stop hole to delay the fatigue crack growth. Futhermore, in case of the stringer subjected by bending moment, the reinforcement over the upper flange side was determined to be a useful strengthening method, and the reinforcement to the web of the stringer was not appropriate to accomodate as a adequate strengthening method. Also it was confirmed that the category of the fatigue design for the coped stringer met with the category E specified on the fatigue design criteria of the Highway Standard Specification in Korea.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.1
• /
• pp.47-56
• /
• 2017

In this study, the higher temperature thermal property of the fly ash-blast furnace slag system Geopolymer including alumina aggregate was investigated whether that Geopolymer will be or not useful as thermal-resistant construction materials. Under every mixing conditions, the crack on the surface of hardened body was not observed up to $800^{\circ}C$ and it corresponded with fact that level of changes was not significant before and after heating process. Residual compressive strength is most high when mixing Blast-Furnace Slag ratio is 60 wt% until temperature reaches $800^{\circ}C$. The major hydrates of hardened body of Geopolymer; amorphous halo pattern between $20{\sim}35^{\circ}$ (2theta) and mullite ($3Al_2O_3{\cdot}2SiO_2$) and quartz ($SiO_2$) was found during the experiment. Amorphous halo pattern was a aluminosilicate gel generated by geopolymeric polycondensation and it was found that the halo pattern of aluminosilicate gel was preserved up to $800^{\circ}C$. The patterns of aluminosilicate gel disappeared from $1,000^{\circ}C$ and crystal phases like gehlenite, calcium silicate, calcium aluminum oxide, microcline was observed with the increase of exposure temperature.