• Journal of Preventive Medicine and Public Health
• /
• 제49권1호
• /
• pp.35-44
• /
• 2016

Objectives: We investigated the associations of sarcopenia-defined both in terms of muscle mass and muscle strength-and sarcopenic obesity with metabolic syndrome. Methods: Secondary data pertaining to 309 subjects (85 men and 224 women) were collected from participants in exercise programs at a health center in a suburban area. Muscle mass was measured using bioelectrical impedance analysis, and muscle strength was measured via handgrip strength. Sarcopenia based on muscle mass alone was defined as a weight-adjusted skeletal muscle mass index more than two standard deviations below the mean of a sex-specific young reference group (class II sarcopenia). Two cut-off values for low handgrip strength were used: the first criteria were <26 kg for men and <18 kg for women, and the second criteria were the lowest quintile of handgrip strength among the study subjects. Sarcopenic obesity was defined as the combination of class II sarcopenia and being in the two highest quintiles of total body fat percentage among the subjects. The associations of sarcopenia and sarcopenic obesity with metabolic syndrome were evaluated using logistic regression models. Results: The age-adjusted risk ratios (RRs) of metabolic syndrome being compared in people with or without sarcopenia defined in terms of muscle mass were 1.25 (95% confidence interval [CI], 1.06 to 1.47, p=0.008) in men and 1.12 (95% CI, 1.06 to 1.19, p<0.001) in women, which were found to be statistically significant relationships. The RRs of metabolic syndrome being compared in people with or without sarcopenic obesity were 1.31 in men (95% CI, 1.10 to 1.56, p=0.003) and 1.17 in women (95% CI, 1.10 to 1.25, p<0.001), which were likewise found to be statistically significant relationships. Conclusions: The associations of sarcopenia defined in terms of muscle mass and sarcopenic obesity with metabolic syndrome were statistically significant in both men and women. Therefore, sarcopenia and sarcopenic obesity must be considered as part of the community-based management of non-communicable diseases.

• 한국건축시공학회지
• /
• 제6권3호
• /
• pp.123-129
• /
• 2006

In these days, as building structures are getting taller, larger, and more diversified, structural systems with more economy and more efficiency are being required and so are more efficient building materials, this study conducted a basic experiment to conclude an adequate selection of materials and to calculate an optimal mixing proportion of those materials to produce High-strength concrete in a 100MPa of specified concrete strength. And also we conducted an experiment to find out basic properties of this concrete such as slump-flow, strength.

• 대한소아치과학회지
• /
• 제33권4호
• /
• pp.693-698
• /
• 2006

유구치 1급 와동의 복합레진 수복 시 C-factor가 가장 크게 나타나며 중합수축에 의한 응력도 가장 크게 나타난다. 이 실험에서는 응력이 각 와동벽 위치에 따라 다르게 나타나는 양상을 microtensile bond strength(MTBS)실험을 통해 확인해보았다. 하악 제2유구치 20개를 두 개의 군으로 나누었다. 각각 다른 종류의 복합레진으로 수복하였고 개별 치아에서 각각 치수벽 시편과 축벽 시편을 얻어 총 4개의 군으로 나누었다. MTBS를 측정하였으며 통계적 유의성을 student T-test를 통해 검정하였다. ZP: Filtek Z250- 치수벽, ZA: Filtek Z250- 축벽, SP : Filtek Supreme - 치수벽, SA: Filtek Supreme - 축벽, 다음과 같은 결과를 얻을 수 있었다. 1. ZP군과 ZA군, SP군과 SA군 사이에서는 유의한 차이가 존재하였다(p<.001). 2. ZP군과 SP군, ZA군과 SA군 사이에서는 유의한 차이가 존재하지 않았다(p<.001).

• Strategy21
• /
• 통권34호
• /
• pp.178-206
• /
• 2014

The battlefield environment in the maritime has been changed by advanced IT technology, variation of naval warfare condition, and developed military science and technology. In addition, state-of-the-art surface combatants has become to multi-purpose battleship that is heavily armed in order to meet actively in composed future sea battlefield condition and perform multi-purpose missions as well as having capability of strategic strike. To maximize the combat strength and survivability of ship, it is not only possible for Zumwalt(DDG-1000) class combatant to conduct multi-purpose mission with advanced weapon system installation, innovative hull form and upper structure such as deckhouse, shipboard high-powered sensor, total ship computing environment, and integrated power control but it was designed so that can be installed with energy based weapon systems in immediate future. Zumwalt class combatant has been set a high value with enormous threatening surface battleship in the present, it seems to be expected that this ship will be restraint means during operation in the littoral. The advent of Zumwalt class battleship in the US Navy can be constructed as a powerful intention of naval strength building for preparing future warfare. It is required surface ship that can be perform multi-purpose mission when the trend of constructed surface combatants was analyzed. In addition, shipboard system has been continuously modernized to keep the optimized ship and maximize the survivability with high-powered detection and surveillance sensor as well as modularity of combat system to efficient operation.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.97-105
• /
• 2006

Until now, we are designing the breakwater of container vessel as cantilever structure ypically. Recently, we have designed "side shell touch type breakwater" for the first time to 6,200TEU Class Container Carrier registered on Lloyd Classification. The Lloyd Rule does not provide requirements for breakwater scantling but only recommend breakwater wave load and Lloyd Class requests for submitting the calculation results. At early design step, we had reviewed the breakwater structure through the calculation of simple beam theory with wave load recommended by Lloyd and referring to already built same size of container vessel. At the same time we had carried out F.E.M analysis of breakwater structure and had updated design, so we could verify the strength of side shell touch type breakwater at final step.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권3호
• /
• pp.31-37
• /
• 2018

이 논문은 압축강도 수준(100, 140, 180 MPa급)에 따른 HPFRCC의 동적충격 인장강도를 평가하였다. 먼저 100, 140, 180 MPa급 HPFRCC의 압축응력-변형률 관계를 분석한 결과 압축강도는 각각 112, 150, 202 MPa로 나타났으며, 압축강도가 높아짐에 따라 탄성계수도 증가하는 경향을 나타내었다. 100, 140, 180 MPa급 HPFRCC의 정적 인장강도는 각각 10.7, 11.5, 16.5 MPa로 나타났으며, 압축강도가 높아질수록 인장강도도 증가하는 경향을 나타내었다. 반면 100 및 140 MPa급 HPFRCC에서의 인장강도 및 에너지 흡수능력은 압축강도 수준에 따라 큰 차이를 보이지 않았다. 이는 시험체의 규격 및 강섬유의 배열에 영향을 받은 것으로 판단된다. HPFRCC의 동적충격 인장강도를 평가한 결과, 변형률 속도가 10-1/s에서 150/s로 증가할수록 모든 HPFRCC의 인장강도와 동적증가계수는 증가하는 경향을 보였다. 한편 동일한 범위의 변형률 속도에서 HPFRCC의 압축강도가 낮을수록 인장강도에 대한 DIF가 높게 측정되어 효율적인 측면에서는 100 MPa급 HPFRCC가 가장 우수한 것으로 나타났다. 따라서 높은 수준의 인장성능이 요구되는 경우 높은 압축강도를 가지는 HPFRCC를 사용하는 것이 유리하며, 폭발과 같은 고속변형률 속도에서 보다 효율적인 접근을 위해서는 목표 압축강도에 근접한 HPFRCC를 사용하는 것이 바람직한 것으로 판단된다.

• 가정과삶의질연구
• /
• 제27권5호
• /
• pp.123-135
• /
• 2009

The purpose of this study was to investigate the effects of family conflict and self-control on school maladjustments of early adolescents. Subjects of this study consisted 662 middle school students drawn from 4 middle schools in Cheong-ju city. The results of this study were as follows: First, younger students' maladjustment to teachers was influenced by variables such as school year, economic levels, conflict strength between parents, conflict settlement between parents, reliability between parents and children, communication between parents and children and self-control, etc. In other words, students' maladjustment to teachers was high at the students in the 2nd year rather than in the 1st year, low economic level, high conflict strength between parents that younger students perceived, low conflict settlement between parents, low reliability between parents and children, high hostility between parents and children and low self-control. Second, younger students' maladjustment to the class was influenced by variables such as gender, school year, economic levels, conflict strength between parents, reliability between parents and children, communication between parents and children, and self-control, etc. In other words, young students' maladjustment to the class was high at the 2nd year students rather than at the 1st year students, low economic level, high conflict strength between parents, low reliability between parents and children, poor communication between parents and children, and low self-control. Third, younger students' maladjustment to rules was influenced by variables such as school year, economic level, conflict level between parents, hostility between parents and children, and self-control, etc. In other words, younger students' maladjustment to rules was high at the 1st year students rather than the 2nd year students of middle school, low economic level, high conflict strength between parents, high hospitality between parents and children and low self-control, etc. Fourth, younger students' maladjustment to friends was influenced by variables such as conflict strength between parents, conflict settlement between parents, hospitality between parents and children, and self-control, etc. In other words, younger students' maladjustment to friends was high at high conflict strength between parents, low conflict settlement between parents, high hospitality between parents and children and low self-control, etc. In the study, self-control was found to be the most important variable at younger students' maladjustment to teachers, class and rules, etc, and conflict settlement between parents was found to be the most significant variable at younger students' maladjustment to friends.

• 대한환경공학회지
• /
• 제28권6호
• /
• pp.661-666
• /
• 2006

칼슘함량이 낮은 F급 플라이 애쉬와 알칼리 활성화 용액으로 구성된 페이스트의 압축강도 특성에 대한 연구를 수행하였다. 수산화나트륨과 물유리 그리고 물을 혼합하여 제조한 이들 활성화 용액은 매우 높은 $OH^-$ 농도를 가지고 있다. 알칼리 활성화 용액의 조성과 온도는 플라이 애쉬-시멘트 페이스트의 압축강도 발현에 대한 현저한 영향 인자임을 보여주었다. 50 MPa 이상의 압축강도는 플라이 애쉬를 각각 $60^{\circ}C$에서 48시간과 $85^{\circ}C$에서 24시간 양생하여 얻었다. 본 연구결과, F급 플라이 애쉬/NaOH/물유리의 무게 비율 25:8:2와 활성화 용액/플라이 애쉬의 무게 비율 0.6/1.0은 높은 강도를 가진 페이스트를 위한 적정 혼합비율로 나타났다.

• 자원리싸이클링
• /
• 제33권1호
• /
• pp.48-57
• /
• 2024

본 연구는 농촌에서 발생되는 C급 폐비닐의 활용률 개선을 목적으로 아임계 열수를 거쳐 생성된 에코 파우더(Eco-powder)를 플라스틱 원재료로 활용하기 위한 기초연구이다. 생성된 에코 파우더의 회분함량 제어를 위한 선가공 처리의 효율과 생성된 에코 파우더의 회분함량에 따른 플라스틱으로서의 기초 특성을 평가하였다. 기초 특성으로서는 수준별 에코 파우더 활용 압축성형 시험체의 회분함량, 충격강도, 굴곡강도, 인장강도를 평가하였다. 실험 결과, 선가공으로 물리적인 충격을 통한 토사분과 폐비닐 부분의 분리 효율이 개선되는 것을 확인하였다. 또한 회분함량에 따른 충격강도, 굴곡강도, 인장강도 평가 결과, 회분함량 26% 이하 수준의 에코 파우더에서 목표로 하는 성능을 만족하는 것으로 나타났다. 이로써 기존 활용도 및 회수율이 낮던 C급 폐비닐을 아임계 열수 처리 후 물리적 가공 처리를 통해 최적 조건을 설정하여 플라스틱 원료로서 활용이 가능한 것을 확인하였다.

• 한국자동차공학회논문집
• /
• 제20권5호
• /
• pp.8-12
• /
• 2012

Application for laser welding have increased steadily in recent years due to its benefits such as high speed, high productivity and high density energy heat source. In this study, the influence of welding parameters was investigated on penetration characteristics, mechanical properties including formability test in disk laser welded 1000MPa class steels. A shielding gas was used and bead-on-plate test was performed with various welding speeds. The main welding test was performed by butt welding with various welding speeds at 2.5 kW laser power.