• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.554-564
• /
• 1996

Oxygen reduction in an alkaline fuel cell was studied by using perovskite of $La_{0.6}Sr_{0.4}Co_{1-x}Fe_xO_3$(x=0.00, 0.01, 0.10, 0.20, 0.35, and 0.50) as an oxygen electrode catalyst. The changes in the catalytic properties as a function of Fe content were investigated by XRD, TG, and TPR. XRD patterns gave different lattice parameters of the catalysts. TG study revealed that Fe was so stabilized in the perovskite structure as to be hardly reduced even up to $900^{\circ}C$, and the amount of oxygen which was eliminated at high temperature increased with the fraction of Fe because Fe induced the increase of Co-O binding energy. From TPR study, ${\alpha}$-(low temperature peak) and ${\beta}$-(high temperature peak)states were observed. The bond strength of the ${\beta}$-species which was associated strongly with Co of the perovskite increased proportionally with the fraction of Fe. The ${\alpha}$-species, reversible oxygen, was the active species in the oxygen reduction. The ${\alpha}$-peak temperature which reflected the binding energy between Co and ${\alpha}$-state oxygen moved to lower temperature with the increase of lattice parameter of the catalytst due to the increase of Fe content. The decrease in the binding energy increased the activity in the oxygen reduction, but the decrease of ${\alpha}$-species with the increase of Fe content decreased the activity. The increase in the surface area with Fe content had little effect on the activity.

• Journal of Bio-Environment Control
• /
• v.1 no.2
• /
• pp.154-161
• /
• 1992

This experiment was carried oui to determine the relativeness between growth, yield characters and bio-informations as influenced by the spray and rest time intervals of nutrient solution. Tomato(Lycopersicon esculentum Mill.) were grown in aeroponic system on a misting schedule of continuously 60 sec, 30 sec and 10 sec at 10 min intervals with full strength Yamazaki's solution recommended for tomato production. The results obtained were as follows : 1. Leaf area was highest in the plot of 30 sec spray and 10 min rest while the forest one was the plot of 60 sec spray and 10 min rest. Growth characteristics in terms of dry weight of each organ, number of flower, number of flower setted and fruit dry weight were greater in the plot of 30 sec spray and 10 min rest than the other treatments. 2. The number of flower increased with decreasing dry weight but number of flower sorted was not significantly different among treatment except for the plot of 60 sec spray and 10 min rest. 3. Leaf dry weight and fruit dry weight were highly correlated so that 30 sec spray and 10 min rest plot which is the highest fruit dry weight showed the largest leaf area. Continuously sprayed plot reduced markedly the fruit dry weight compared with leaf area. Optimum spray and rest time of nutrient solution in the range of this experiment was determined as 30 sec spray and 10 min rest. 4. Solar radiation within glasshouse during daytime reduced severely compared with outdoor one and air temperature within greenhouse was higher than the leaf temperature of tomato plant. The changes of environmental factors, solar radiation, temperature were accompanied with the sensitive change of bio-informations of tomato leaf Especially differences of spray intervals of nutrient solution affected greatly to the changes of bio-informations : leaf water potential, stomatal resistance and leaf temperature etc. 5. The changing patterns of leaf growth as influenced by the spray and rest intervals of nutrient solution were closely related to the leaf water potential, stomatal resistance and leaf temperature. Feasibility was demonstrated that measurement of bio-information of tomato leaf as influenced by the change of environmental factors could be expected to the amount of growth and fruit yield.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.833-840
• /
• 2017

For wide application of perilla leaf, which has various healthy functions and can be easily cultured across Korea, the physicochemical and sensory properties of pan bread made with various amounts of squeezed perilla leaf juice (SPLJ) were analyzed. When dough characteristics were analyzed by using farinograph, consistency and dough development time were not significantly different between the control and bread dough made with various amounts of SPLJ, whereas dough stability time increased with increasing SPLJ amount. Expansion rate of dough decreased with increasing SPLJ amount. The volume, specific volume, and baking loss rate of pan bread made with various SPLJ amounts decreased with increasing SPLJ amount. Pan bread crumb colors became thickened and greenish with increasing SPLJ amount. For physical properties of pan bread made with various SPLJ amounts, springiness and cohesiveness decreased with increasing SPLJ amount, whereas brittleness, chewiness, and hardness increased with increasing SPLJ amount. In the sensory strength analysis, pore uniformity and soft texture decreased with increasing SPLJ amount, whereas crumb color (dark greenish), perilla leaf odor, perilla leaf taste, and chewing texture increased with increasing SPLJ amount. In the overall acceptance analysis, 1.5% SPLJ was the most preferred with a score of 7.10. However, statistical differences between 1.5% and 1.0% SPLJ were not detected at P<0.05. In the partial least squares analysis, consumers liked bread with a green crumb color, perilla leaf odor, perilla leaf taste, and soft and chewing texture. In conclusion, physicochemical properties of pan bread made with SPLJ were less desirable than those of the control; however, consumer acceptance of pan bread made with 1.5% SPLJ was shown the highest. Therefore, methods for increasing physicochemical properties of pan bread made with SPLJ need to be developed for wide application of perilla leaf.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.45-54
• /
• 2017

The characteristics of the rock cleavage in Jurassic Geochang granite were analysed using the distribution of microcrack lengths and spacings. The phases of distribution of the above lengths and spacings were derived from the enlarged photomicrographs(${\times}6.7$) of the thin section. First, the length and spacing-cumulative diagrams for the six directions of rock cleavages were arranged in increasing order($H2{\rightarrow}R1$) on the density(${\rho}$) of microcrack length. The various parameters were extracted through the combination of the above two types of diagrams. The discrimination factors representing the three quarrying planes and three rock cleavages were acquired through the mutual contrast between the values of parameters. The analysis results of the research are summarized as follows. The evaluation for the six directions of rock cleavages was performed using the parameters such as (1) intersection angle(${\alpha}-{\beta}$) and (2) exponent difference(${\lambda}_S-{\lambda}_L$) between two exponential straight lines related to spacing(${\alpha}$, ${\lambda}_S$) and length(${\beta}$, ${\lambda}_L$). The values of parameters(1 and 2) are in order of H(hardway, (H1 + H2)/2) < G(grain, (G1 + G2)/2) < R(rift, (R1 + R2)/2). On the contrary, the values of the above two parameters for three planes are in order of R < G < H. Meanwhile, the direction of convergence between two exponential straight lines was derived. The above direction is compliant to arrangement of the line os' centering around the line ol. The above two lines converge in the direction of the Y-axis when the line ol and line os' occupy the upper region on the left and the lower region on the right, respectively(R-type). On the contrary, the above two lines converge in the direction of the X-axis when the order of arrangement between line ol and line os' is reversed(H-type). Especially, the positive(+) or negative(-) value of intersection angle(${\alpha}-{\beta}$) is determined by the arrangement of two vertical lines. This type of correlation analysis is useful for evaluating the relative strength of rock cleavage and discriminating three quarrying planes.

• The Journal of Korean society of community based occupational therapy
• /
• v.3 no.1
• /
• pp.1-10
• /
• 2013

Objective : This study investigates the impact of the musculoskeletal disorder prevention exercise program designed on the basis of agricultural work posture on the balance ability, Oswestry Disability level, and Psychosocial stress of participants from one rural village in Chungnam area. Method : The exercise program was provided to 21 farmers with musculoskeletal symptoms living in one village in Chungnam area. Such program was performed once a week, 90 minutes per session, for a total of twelve weeks from July 10 to October 11, 2008, and was constructed in a way to increase flexibility and muscular strength, taking agricultural work posture into account. The balance ability, Oswestry Disability Index, and Psychosocial Well-being Index scores were analyzed based on the data of 13 of the farmers who participated in the program for more than eight times and in all of the pre- and post-assessments. Result : Thirteen participants were all women who were 70.55(${\pm}6.78$) years old on average. Most of them were engaged in general dry-filed farming. The parts where they mainly felt the pain were low back(69.2%) and knees(61.5%), and 46.2% responded 'not healthy' to the question on the overall health status. The static balance ability when standing on the right foot significantly increased from the average 9.27(${\pm}5.53$) seconds before intervention to 14.22(${\pm}5.47$) seconds after intervention(p<.05). The Oswestry Disability Index showed a significant change, decreasing from the average 19.84(${\pm}6.89$) seconds to 14.38(${\pm}7.58$) seconds(p<.05). However, there was no change in the Psychosocial Well-being Index. Conclusion : This exercise program that has been conducted for the female farmers who are mainly engaged in the dry-filed farming has contributed to the improvement of their static ability and reduction of their Oswestry Disability Index scores. It is expected that the studies on the effects of the differentiated exercise programs depending on work characteristics will make progress in the future.

• Journal of the Korean GEO-environmental Society
• /
• v.18 no.7
• /
• pp.37-47
• /
• 2017

In this study, a series of full-scale field tests on prebored and precast steel pipe piles and the corresponding numerical analysis have been conducted in order to study the characteristics of pile load-settlement relations and shear stress transfer at the pile-soil interface. Dynamic pile load tests (EOID and restrike) have been performed on the piles and the estimated design pile loads from EOID and restrike tests were analysed. Class-A type numerical analyses conducted prior to the pile loading tests were 56~105%, 65~121% and 38~142% respectively of those obtained from static load tests. In addition, design loads estimated from the restrike tests indicate increases of 12~60% compared to those estimated in the EOID tests. The EOID tests show large end bearing capacity while the restrike tests demonstrate increased skin friction. When impact energy is insufficient during the restrike tests, the end bearing capacity may be underestimated. It has been found that total pile capacity would be reasonably estimated if skin friction from the restrike tests and end bearing capacity from the EOID are combined. The load-settlement relation measured from the static pile load tests and estimated from the numerical modelling is in general agreement until yielding occurs, after which results from the numerical analyses substantially deviated away from those obtained from the static load tests. The measured pile behaviour from the static load tests shows somewhat similar behaviour of perfectly-elastic plastic materials after yielding with a small increase in the pile load, while the numerical analyses demonstrates a gradual increase in the pile load associated with strain hardening approaching ultimate pile load. It has been discussed that the load-settlement relation mainly depends upon the stiffness of the ground, whilst the shear transfer mechanism depends on shear strength parameters.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.6
• /
• pp.1619-1637
• /
• 2016

With wide distribution of smart phones and development of mobile network, social network service (SNS) is displaying remarkable growth rates. Users build new social relations by sharing their interests, which brings surging growth to the SNS based on the combination between the strength of expanding the place for communication and distribution of smart phones featured with easy portability. This study is designed to understand impact factors of SNS on users in Korea and to conduct empirical research on casual relationship between the factors above and the factors affecting personal information behavior through the privacy protection and self-efficacy. In order to accomplish the objective above, the study presented a research model applied with key variables of the Health Belief Model (HBM) predicting behaviors capable of recognizing and preventing individual diseases in the field of health communication. To perform empirical verification on the research model of this study, a survey was conducted upon college students at N university located in Chungcheongnam-do and K university in rural area, who have experiences using the SNS. Through this survey, a total of 186 samples were collected, and path analysis was performed in order to analyze the relationship between the factors. Based on the findings from the survey, first, variables Perceived probability, Perceived severity, Perceived impairment of the HBM, key factors of personal information protection behavior on the SNS, were found to exhibit negative relationship with self-efficacy, and Perceived probability, Perceived benefit, Perceived impairment were found to exhibit negative relationship with privacy protection. But the above, Perceived severity showed positive relationship with privacy protection, and Perceived benefit and self-efficacy also displayed positive relationship. Second, although self-efficacy, a parameter, showed positive relationship with privacy protection, it demonstrated negative relationship with personal information protection behavior. Lastly, privacy protection exhibited positive relationship with personal information protection behavior. By presenting theoretical model reflected with characteristics of prevention based on these findings above unlike previous studies on personal information protection using technologies threatening personal information, this study is to provide theoretical and operational foundation capable of offering explanations how to predict personal information protection behavior on the SNS in the future.

• Management & Information Systems Review
• /
• v.36 no.3
• /
• pp.167-184
• /
• 2017

In this study, we investigated the effect of offline banking trust on smart banking trust. As influencing factors of smart banking trust, this study compared offline banking trust, smart banking's system quality, and information quality. For the empirical study, 186 questionnaire data were collected from smart banking users and the data were analyzed using Smart-PLS 2.0. As results, it was verified that there is trust transfer in FinTech service, by the significant effect of offline banking trust on smart banking trust. And it was proved that the effect of offline banking trust on smart banking trust is lower than that of smart banking itself. The contribution of this study can be seen in both academic and industrial aspects. First, it is the contribution of the academic aspect. Previous studies on banking were focused on either offline banking or smart banking. But this study, focus on the relationship between offline banking and online banking, proved that offline banking trust affects smart banking trust. Next, it is the industrial contribution. This study showed that offline banking characteristics of traditional commercial banks affect the trust of emerging smart banking service. This means that the emerging FinTech companies are not advantageous in the competition of trust building compared to traditional commercial banks. Unlike traditional commercial banks, the emerging FinTech is innovating the convenience of customers by arming them with new technologies such as mobile Internet, social network, cloud technology, and big data. However, these FinTech strengths alone can not guarantee sufficient trust needed for financial transactions, because banking customers do not change a habit or an inertia that they already have during using traditional banks. Therefore, emerging FinTech companies should strive to create destructive value that reflects the connection with various Internet services and the strength of online interaction such as social services, which have an advantage over customer contacts. And emerging FinTech companies should strive to build service trust, focused on young people with low resistance to new services.

• The Korean Journal of Pesticide Science
• /
• v.10 no.4
• /
• pp.296-305
• /
• 2006

The adsorption and persistence of pencycuron {1-(4-chlorobenzyl) cyclopentyl-3-phenylurea} in soils were investigated under laboratory and field conditions to in order to assess the safety use and environmental impact. In the adsorption rate experiments, a significant power function of relation was found between the adsorbed amount of pencycuron and the shaking time. Within one hour following the shaking, the adsorption amounts in the SCL and the SiCL were 60 and 65% of the maximum adsorption amounts, respectively. The adsorption reached a quasi-equilibrium 12 hours after shaking. The adsorption isotherms followed the Freundlich equation. The coefficient (1/n) indicating adsorption strength and degree of nonlinearity was 1.45 for SCL and 1.68 to SiCL. The adsorption coefficients ($K_d$) were 2.31 for SCL and 2.92 to SiCL, and the organic carbon partition coefficient, $K_{oc}$, was 292.9 in SCL and 200.5 inSiCL. In the laboratory study, the degradation rate of pencycuron in soils followed a first-order kinetic model. The degradation rate was greatly affected by soil temperature. As soil incubation temperature was increased from 12 to $28^{\circ}C$, the residual half life was decreased from 95 to 20 days. Arrhenius activation energy was 57.8 kJ $mol^{-1}$. Furthermore, the soil moisture content affected the degradation rate. The half life in soil with 30 to 70% of field moisture capacity was ranged from 21 to 38 days. The moisture dependence coefficient, B value in the empirical equation was 0.65. In field experiments, the half-life were 26 and 23 days, respectively. The duration for period of 90% degradation was 57 days. The difference between SCL and SiCL soils varied to pencycuron degradation rates were very limited, particularly under the field conditions, even though the characteristics of both soils are varied.

• Asia pacific journal of information systems
• /
• v.19 no.4
• /
• pp.77-100
• /
• 2009

Information Systems (IS) is an essential tool for any organizations. The last decade has seen an increasing body of knowledge on IS usage. Yet, IS often fails because of its misuse or non-use. In general, decisions regarding the selection of a system, which involve the evaluation of many IS vendors and an enormous initial investment, are made not through the consensus of employees but through the top-down decision making by top managers. In situations where the selected system does not satisfy the needs of the employees, the forced use of the selected IS will only result in their resistance to it. Many organizations have been either integrating dispersed legacy systems such as archipelago or adopting a new ERP (Enterprise Resource Planning) system to enhance employee efficiency. This study examines user resistance prior to the adoption of the selected IS or ERP system. As such, this study identifies the importance of managing organizational resistance that may appear in the pre-adoption context of an integrated IS or ERP system, explores key factors influencing user resistance, and investigates how prior experience with other integrated IS or ERP systems may change the relationship between the affecting factors and user resistance. This study focuses on organizational members' resistance and the affecting factors in the pre-adoption context of an integrated IS or ERP system rather than in the context of an ERP adoption itself or ERP post-adoption. Based on prior literature, this study proposes a research model that considers six key variables, including perceived benefit, system complexity, fitness with existing tasks, attitude toward change, the psychological reactance trait, and perceived IT competence. They are considered as independent variables affecting user resistance toward an integrated IS or ERP system. This study also introduces the concept of prior experience (i.e., whether a user has prior experience with an integrated IS or ERP system) as a moderating variable to examine the impact of perceived benefit and attitude toward change in user resistance. As such, we propose eight hypotheses with respect to the model. For the empirical validation of the hypotheses, we developed relevant instruments for each research variable based on prior literature and surveyed 95 professional researchers and the administrative staff of the Korea Photonics Technology Institute (KOPTI). We examined the organizational characteristics of KOPTI, the reasons behind their adoption of an ERP system, process changes caused by the introduction of the system, and employees' resistance/attitude toward the system at the time of the introduction. The results of the multiple regression analysis suggest that, among the six variables, perceived benefit, complexity, attitude toward change, and the psychological reactance trait significantly influence user resistance. These results further suggest that top management should manage the psychological states of their employees in order to minimize their resistance to the forced IS, even in the new system pre-adoption context. In addition, the moderating variable-prior experience was found to change the strength of the relationship between attitude toward change and system resistance. That is, the effect of attitude toward change in user resistance was significantly stronger in those with prior experience than those with no prior experience. This result implies that those with prior experience should be identified and provided with some type of attitude training or change management programs to minimize their resistance to the adoption of a system. This study contributes to the IS field by providing practical implications for IS practitioners. This study identifies system resistance stimuli of users, focusing on the pre-adoption context in a forced ERP system environment. We have empirically validated the proposed research model by examining several significant factors affecting user resistance against the adoption of an ERP system. In particular, we find a clear and significant role of the moderating variable, prior ERP usage experience, in the relationship between the affecting factors and user resistance. The results of the study suggest the importance of appropriately managing the factors that affect user resistance in organizations that plan to introduce a new ERP system or integrate legacy systems. Moreover, this study offers to practitioners several specific strategies (in particular, the categorization of users by their prior usage experience) for alleviating the resistant behaviors of users in the process of the ERP adoption before a system becomes available to them. Despite the valuable contributions of this study, there are also some limitations which will be discussed in this paper to make the study more complete and consistent.