• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.147-154
• /
• 1997

The main purpose of this study is to investigate the failure surface in a soil mass by a excavation of the model ground. The failure mechanism of an earth structure is usually determined from field failure observations or from laboratory model tests at failure. To study the failure surface for the excavated slope, laboratory model tests were performed by changing the angle of the excavated slope and the ground condition. Results of the laboratory model tests were compared with those obtained with theoretical solutions using limit equilibrium analysis method. The results of model tests show that, there is a failure to create a straight line in the low angle of excavated surface and a create a circle as the angle increases. As the angle of excavated surface is increasing, the angle of the failure surface increases too. In the angle of the failure surface, the submerged ground is less than the dry ground at $3.2^{\circ}$.

• Journal of the Korean Society of Safety
• /
• v.13 no.3
• /
• pp.135-142
• /
• 1998

This paper is to investigate the failure surface and modes in a soil mass by a excavation of the model ground. To study the failure surface for the excavated slope, centrifugal model tests were performed by changing the angle of the excavated slope(50, 75, $90^{\circ}$) and the ground condition($D_r$=60, 90%, dry and submerged ground). Excavation was simulated during the centrifuge tests by operating a valve that allowed the zinc chloride solvent to drain from the excavation. Results of model tests were compared with those obtained with theoretical solutions using limit equilibrium analysis method. The results of model tests show that, there is a failure to create a straight line in the low angle of excavated surface and a create a circle as the angle increases. Also, as the angle of excavated surface is increasing, the angle of the failure surface increases. The failure length in the submerged ground increases approximately 1.10~1.34 times more than that of the dry ground.

• Water for future
• /
• v.15 no.1
• /
• pp.33-42
• /
• 1982

In recent years owing to extensive land reclamation, increased river engineering activites and morer intense flood plain use, river geomorphology has attracted considerable attention. One of outstanding problems has been maintenance of river meanders and nearly all natural river exhibit the tendency to meander. Often the meander geometry was fitted in to various idealized model. COnsequently, both the selection of data and the methods to determine the geometric parameters were highly subject to individual preferences. This study applied statistical analysis in tipifying their shape and analysised meander characteristics by channel model of line generalization algorithm. This method is applied to Geum river system. The results show that the variance of curvature is a better index to describe the meander intensity and the kurtosis is a good index to characterize the total length of the straight sections for a given reach. The results also show that channel model of line generalization algorithm is a good model in analysis of meander characterisitics.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.8-18
• /
• 1998

In exploration seismology, the Kirchhoff hyperbola has been successfully used to migrate reflection seismo-grams. The mathematical basis of Kirchhoff hyperbola has not been clearly defined and understood for the application of prestack or poststack migration. The travel time from the scatterer in the subsurface to the receivers (exploding reflector model) on the surface can be a kinematic approximation of Green's function when the source is excited at position of the scatterer. If we add the travel time from the source to the scatterer in the subsurface to the travel time of exploding reflector model, we can view this travel time as a kinematic approximation of the partial derivative wavefield with respect to the velocity or the density in the subsurface. The summation of reflection seismogram along the Kirchhoff hyperbola can be evaluated as an inner product between the partial derivative wavefield and the field reflection seismogram. In addition to this kinematic interpretation of Kirchhoff hyperbola, when we extend this concept to shallow refraction seismic data, the stacking of refraction data along the straight line can be interpreted as a measurement of an inner product between the first arrival waveform of the partial derivative wavefield and the field refraction data. We evaluated the Kirchhoff hyperbola and the straight line for stacking the refraction data in terms of the first arrival waveform of the partial derivative wavefield with respect to the velocity or the density in the subsurface. This evaluation provides a firm and solid basis for the conventional Kirchhoff migration and the straight line stacking of the refraction data.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.580-583
• /
• 2007

Various matching methods have been introduced by investigators to improve digital elevation model (DEM) accuracy of satellite imagery. This study proposed an area-based matching method according to land cover property using correlation coefficient of pixel brightness value between the two images for DEM generation from IKONOS stereo imagery. For this, matching line (where "matching line" implies straight line that is approximated to complex nonlinear epipolar geometry) is established by exterior orientation parameters to minimize search area. The matching is carried out based on this line. Land cover classes are divided off into water, urban land, forest and agricultural land. Matching size is selected using a correlation-coefficient image in the four areas. The selected sizes are $81{\times}81$ pixels window, $21{\times}21$ pixels window, $119{\times}119$ pixels window and $51{\times}51$ pixels window in the water area, urban land, forest land and agricultural land, respectively. And hence, DEM is generated from IKONOS stereo imagery using the selected matching sizes and land cover map on the four types.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.9
• /
• pp.30-37
• /
• 1993

In this paper, we present a simple and general lifetime prediction model for PMOSFET by using the correlation between transconductance degradation and gate current influence to solve a problem that that I$_{b}$ is dependent on drain structure. The suggested model is applied to a different channel, drain structured PMOSFET. For all PMOSFETs, dg$_{m}$/g$_{m}$ of PMOSFET appears with one straight line about Q$_{g}$, therefore, this model using I$_{g}$ is consistent with experiment result independently of channel, drain structure. It is, therefore, proposed that a model using I$_{g}$ has a general applicability for PMOSFET's.

• Journal of the Korean Society for Library and Information Science
• /
• v.16
• /
• pp.177-205
• /
• 1989

Retrieval effectiveness is the principal criteria for measuring the performance of an information retrieval system. This paper deals with the characteristics of 'relevance' of information and various measuring techniques of retrieval effectivess. The outlines of this study are as follows: 1) Relevance decision for evaluation should be devided into the user-oriented and the system-oriented decisions. 2) The recall-precision measure seems to be user-oriented, and the recall-fallout measure to be system-oriented. 3) Many of composite measures can not be justified III any rational manner unfortunately. 4) The Swets model has demonstrated that it yields, in general, a straight line instead of a curve of varying curvature and emphasized the fundamentally probabilistic nature of information retrieval. 5) The Cooper model seems to be a good substitute for precision and a useful measure for systems which ranked documents. 6) The Rocchio model were proposed for the evaluation of retreval systems which ranked documents, and were designed to be independent of cut-off. 7) The Cawkell model suggested that the Shannon's equation for entropy can be applied to measuring of retrieval effectiveness.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.14 no.1
• /
• pp.45-60
• /
• 1986

The purpose of the present studies is to establish more rational and practical planning theory for trails of gradient. The results drawn from this research work are as follow ; Mean angle according to topography of Jiga road is $3^{\circ}$33'in low part, $8^{\circ}$17'in middle park and $12^{\circ}$48'in high part. Here, we can find that the highest gradient of Jige roacl is $12^{\circ}$48, Which is showing the fact that jigs road is the most function road when we compare other roads. The regression coefficient between potential model pattern and calculuted model pattern is 0.8 withinTEX>$ 0~<5^{\circ}$, 0.5 within$ 6~10^{\circ}$, and 0.53 within $11~16^{\circ}$. The linear of these model pattern is lower in R & L value, and lager in S & A value according to be steeping gradient. It is thought that these fact are closely related with between human fatigue and R.S.A.L value. Accordingly, when we plan the trails of the gradient in city park, the from of trails is right to mix straight line with curve line within $0~5^{\circ}$, and sine wave close curve line within $6~10 ^{\circ}$, $l1~16^{\circ}$. But, in fact, It is absurd that potential model pattern is applied to the city park in park of corner, widely road and facilities. Therefore, It is thought that the study of this problems will be proceeded in the future. I can reduce the following equation in relation R & S by gradient ; 22 log (R-6.0)=47.96-$\delta$

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1935-1944
• /
• 2018

With the increase of the production of energy from renewable, it becomes important to look at techniques to store this energy. Therefore, a single winding bearingless flywheel motor (SWBFM) specially for flywheel energy storage system is introduced. For the control system of SWBFM, coupling between the torque and the suspension subsystems exists inevitably. It is necessary to build a reasonable radial force mathematical model to precisely control SWBFM. However, SWBFM has twelve independently controlled windings which leads to high-order matrix transformation and complex differential calculation in the process of mathematical modeling based on virtual displacement method. In this frame, a Maxwell tensor modeling method which is no need the detailed derivation and complex theoretical computation is present. Moreover, it possesses advantages of universality, accuracy, and directness. The fringing magnetic path is improved from straight and circular lines to elliptical line and the rationality of elliptical line is verified by virtual displacement theory according to electromagnetic torque characteristics. A correction function is taken to increase the model accuracy based on finite element analysis. Simulation and experimental results show that the control system of SWBFM with radial force mathematical model based on Maxwell tensor method is feasible and has high precision.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.81-86
• /
• 2006

Routing signal lines in PCB, line shapes would be straight or bent. time-domain and frequency-domain evaluation of the signal property and interference are archived by precise Modeling of differential signal line. Some of CAD tools can extract equivalent circuit model parameters. but it takes a long time and heavy loads. This paper introduces a basic RLC equivalent circuit model parameter extraction technique for bent differential structures using genetic algorithm by this technique, we can model equivalent circuit of bent differential structures more faster.