• 제목/요약/키워드: storage times

검색결과 1,782건 처리시간 0.033초

가정 호스피스완화의료 서비스 현황 조사: 실무자 포커스 그룹 인터뷰를 중심으로 (Home hospice palliative care service in Korea: Based on focus group interview)

  • 고수진;김열;송미옥;최영심;최성은;조현정;허윤정;박명희;박선주;권소희
    • Journal of the Korean Data and Information Science Society
    • /
    • 제25권1호
    • /
    • pp.37-52
    • /
    • 2014
  • 본 연구는 가정 호스피스완화의료 제도도입방안 연구의 일부로 가정호스피스 기관들의 실태를 파악하여 가정 호스피스완화의료 표준지침 개발을 위한 기초자료로서 활용하기 위해 시행되었다. 별도의 인력을 배정하고 지속적으로 가정호스피스를 운영하고 있는 7개 기관의 실무자들을 대상으로 개방식 서면조사와 포커스그룹 인터뷰를 실시하였다. 인터뷰에 참여한 기관들은 24시간 on call 서비스, 의사와 간호사, 사회복지사, 사목자를 포함한 호스피스팀 구성, 정기적 팀회의, 사별가족관리 등을 가정 호스피스완화의료의 필수사항으로 여기고 있었고, 필수 시설은 방문간호사 사무실 및 물품준비 공간, 필수 장비는 방문용 가방으로 파악되었다. 방문을 가장 많이 하는 인력은 간호사였고, 가정방문서비스를 위한 전담인력을 두어야 한다는 데에 합의하였다. 가정호스피스 활성화의 장애요인으로 가정 호스피스에 대한 보험수가보상이 없어 팀원의 방문이 제한적이고, 집에서 처방변경이 어려우며, 24시간 주 7일 입원연계가 어려운 점, 가정 내 돌봄제공자가 없는 경우가 늘어나고 있는 점 등이 제시되었다. 가정호스피스 제도화를 위해 가정호스피스 서비스의 표준 개발은 매우 시급하고도 중요하며, 이에 본 연구의 결과는 서비스 표준안의 초안 마련에 근거자료로 활용될 것이다.

High Performance Flexible Inorganic Electronic Systems

  • 박귀일;이건재
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.115-116
    • /
    • 2012
  • The demand for flexible electronic systems such as wearable computers, E-paper, and flexible displays has increased due to their advantages of excellent portability, conformal contact with curved surfaces, light weight, and human friendly interfaces over present rigid electronic systems. This seminar introduces three recent progresses that can extend the application of high performance flexible inorganic electronics. The first part of this seminar will introduce a RRAM with a one transistor-one memristor (1T-1M) arrays on flexible substrates. Flexible memory is an essential part of electronics for data processing, storage, and radio frequency (RF) communication and thus a key element to realize such flexible electronic systems. Although several emerging memory technologies, including resistive switching memory, have been proposed, the cell-to-cell interference issue has to be overcome for flexible and high performance nonvolatile memory applications. The cell-to-cell interference between neighbouring memory cells occurs due to leakage current paths through adjacent low resistance state cells and induces not only unnecessary power consumption but also a misreading problem, a fatal obstacle in memory operation. To fabricate a fully functional flexible memory and prevent these unwanted effects, we integrated high performance flexible single crystal silicon transistors with an amorphous titanium oxide (a-TiO2) based memristor to control the logic state of memory. The $8{\times}8$ NOR type 1T-1M RRAM demonstrated the first random access memory operation on flexible substrates by controlling each memory unit cell independently. The second part of the seminar will discuss the flexible GaN LED on LCP substrates for implantable biosensor. Inorganic III-V light emitting diodes (LEDs) have superior characteristics, such as long-term stability, high efficiency, and strong brightness compared to conventional incandescent lamps and OLED. However, due to the brittle property of bulk inorganic semiconductor materials, III-V LED limits its applications in the field of high performance flexible electronics. This seminar introduces the first flexible and implantable GaN LED on plastic substrates that is transferred from bulk GaN on Si substrates. The superb properties of the flexible GaN thin film in terms of its wide band gap and high efficiency enable the dramatic extension of not only consumer electronic applications but also the biosensing scale. The flexible white LEDs are demonstrated for the feasibility of using a white light source for future flexible BLU devices. Finally a water-resist and a biocompatible PTFE-coated flexible LED biosensor can detect PSA at a detection limit of 1 ng/mL. These results show that the nitride-based flexible LED can be used as the future flexible display technology and a type of implantable LED biosensor for a therapy tool. The final part of this seminar will introduce a highly efficient and printable BaTiO3 thin film nanogenerator on plastic substrates. Energy harvesting technologies converting external biomechanical energy sources (such as heart beat, blood flow, muscle stretching and animal movements) into electrical energy is recently a highly demanding issue in the materials science community. Herein, we describe procedure suitable for generating and printing a lead-free microstructured BaTiO3 thin film nanogenerator on plastic substrates to overcome limitations appeared in conventional flexible ferroelectric devices. Flexible BaTiO3 thin film nanogenerator was fabricated and the piezoelectric properties and mechanically stability of ferroelectric devices were characterized. From the results, we demonstrate the highly efficient and stable performance of BaTiO3 thin film nanogenerator.

  • PDF

A New Device for Intrauterine Artificial Insemination in the Dog

  • Kong, I.K.;Yu, D.J.;Jeong, S.R.;Oh, I.S.;Yang, C.J.;Cho, S.G.;Bae, I.H.;Oh, D.H.;Kim, H.R.;Cho, S.K.;Park, C.S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제16권2호
    • /
    • pp.180-184
    • /
    • 2003
  • The intrauterine inseminator (IUI) was developed to provide the method of depositing dog semen into the uterine body instead of the vagina. The IUI consists of a vaginal endoscope, a balloon sheath, and injection catheter. When the endoscope is inserted into the vagina and the balloon expanded with air, the cervical os becomes visible so a injection catheter can be inserted through the cervix for deposition of the frozen-thawed semen. The efficacy of the IUI device was compared to intra-vaginal artificial insemination using semen that had been collected and frozen from pooled sperm-rich fraction of ejaculates collected from two Jindo dog donors. Aliquots of semen were extended with a Tris-egg yolk diluent, centrifuged, the seminal plasma removed, the pellet resuspended with the same diluent, and cooled to $5^{\circ}C$ over a 2 h period. A Tris-egg yolk-glycerol extender was added at $5^{\circ}C$; after 1 h, semen was loaded into 0.5 ml straws, and straws were frozen in LN vapor for 5 min, and immersed in LN for storage. The final sperm concentration for freezing was approximately $100{\times}10^{6}cells/ml$. The straws were thawed at $70^{\circ}C$ for precisely 6 sec, 1.5 ml Tris-egg yolk buffer at $38^{\circ}C$ added, and the 2 ml of thawed semen was used for a single insemination using the IUI device. Each bitch was inseminated at optimal insemination point, which was estimated by vaginal epithelial cells staining and progesterone concentration analysis. Use of the IUI device resulted in 21 of 26 females giving birth to 89 pups ($4.2{\pm}1.6$ pups per litter), while intra-vaginal AI resulted in 6 of 15 females whelping a total of 17 pups ($2.8{\pm}1.2$ pups per litter). We believe the IUI device is easier to use than previously described devices used for intrauterine insemination. In our experience the expansion of the balloon has a calming effect on the bitch that aids the inseminator. These results indicate that the IUI device was able to provide high fertility with 50 million frozen sperm per insemination and two inseminations.

진동.충격음 흡수성능을 지니는 목질계 복합재료의 개발(II) -가교밀도가 상호침투망목고분자의 진동흡수성능에 미치는 영향- (Developmnet of Vibration and Impact Noise Damping Wood-based Composites (II) -The Influence of the Degree of Crosslinking on the Damping Properties of Interpenetrating Polymer Networks-)

  • 이현종
    • 임산에너지
    • /
    • 제17권1호
    • /
    • pp.47-55
    • /
    • 1998
  • 사용온도 및 주파수 범위를 고려할 경우 진동흡수재료로서 사용하는 폴리머는 다소 넓은 온도범위에서 높은 손실계수를 지녀야한다. IPN's은 두 개 또는 그 이상의 고분자가 상호 침투하여 망목상으로 얽혀있는 혼합계로서 강제적으로 상분리가 제한되어 어느 정도의 상용성을 부여할 수 있으므로 폭 넓은 진동흡수재료의 분자설계에 적합하다. 본 실험에서는 공중합조성이 다른 여러 가지 코폴리머를 IPN's화하여 폭 넓은 온도 범위에서 높은 손실 계수를 나타내는 고분자의 합성을 시도하였으며, 고분자의 점탄성 및 가교밀도가 적충재의 진동흡수성능에 미치는 영향을 검토하였다. 동력학적 측정의 결과 IPN's의 상용성은 IPN's화시키고자하는 폴리머의 상용성 및 가교밀도에 의존하는 경향을 나타내 공중합조성이 다른 코폴리머를 IPN's화시키거나, 가교밀도를 조절하면 폭넓은 진동흡수성능을 지니는 폴리머의 조제가 가능함을 시사하였다. IPN's을 적층한 복합체의 진동흡수계수는 폴리머의 E'가 대략 5$\times$$10^7$~109 dyne/$cm^2$의 범위에서 높은 손실계수를 지닌 경우 높아졌다. 특히, 3%의 DEGDM을 사용하여 함성한 poly(2-EHA80-co-St20)/poly(2-EHA20-co-St80) IPN's은 상온을 중심으로 넓은 범위에서 비교적 높은 댐핑성능을 나타내었다.

  • PDF

도판트 프리커서의 용해도 차이에 의한 Cr-doped Li4Ti5O12의 전기화학적 특성 변화 (Electrochemical Characteristic Change of Cr-doped Li4Ti5O12 due to Different Water Solubility of Dopant Precursors)

  • 윤수원;송한나;김용태
    • 전기화학회지
    • /
    • 제18권1호
    • /
    • pp.17-23
    • /
    • 2015
  • $Li_4Ti_5O_{12}$는 우수한 안정성으로 자동차용 리튬 이온 이차전지의 음극 활물질로서 각광 받고 있다. 그러나 넓은 밴드갭에 기인한 절연체 특성으로 고율 충/방전을 가능하게 하기 위해서는 전자 전도도의 개선이 필수적이다. 본 연구에서는 Cr 도핑을 통해 $Li_4Ti_5O_{12}$의 전자 전도도 개선을 목표로 하였으며, wet-mixing법을 통한 물질 합성시 도판트인 Cr 프리커서의 용해도 차이에 의한 Cr-doped $Li_4Ti_5O_{12}$의 전기화학적 특성 변화를 고찰하고자 하였다. 시료의 물리적 특성은 ICP, XRD, SEM, EXAFS을 통하여 확인하였고 1.0V~3.0V (vs. $Li/Li^+$) 하에서 충/방전 특성을 조사하였다. 프리커서의 용해도는 합성된 물질의 상(phase) 및 모폴로지에 큰 영향을 미쳤으며, 가장 용해도가 높은 $Cr(NO_3)_2$ 프리커서로부터 합성된 경우 Bare $Li_4Ti_5O_{12}$와 비교하여 약 2배 개선된 고율 충/방전 특성(130 mAh/g @ 10 C)을 확인하였다.

차세대 무선 네트워크 환경에서 메시지 보호를 위한 통신 시스템 설계 (A Design Communication System for Message Protection in Next Generation Wireless Network Environment)

  • 민소연;진병욱
    • 한국산학기술학회논문지
    • /
    • 제16권7호
    • /
    • pp.4884-4890
    • /
    • 2015
  • 전 세계의 인구가 1인 평균 2대의 모바일 디바이스를 소지하는 시대가 다가오고 있으며 무선 네트워크 시장이 점차 확장되고 있다. 모바일 기기의 활용도가 높아짐에 따라서 와이파이(Wi-fi, Wireless Fidelity=Wireless LAN)가 선호하는 네트워크로 떠오르고 있다. 와이파이를 기반으로 공공기관, 의료, 교육러닝 및 콘텐츠, 제조, 리테일 등 다양한 영역에서 새로운 가치를 창출해가고 있으며, 글로벌 네트워크가 구축되어 복합적인 서비스를 제공하고 있다. 하지만 차세대 무선 네트워크 환경에서 무선 디바이스 식별자 취약, MAC 위조를 통한 네트워크 자원의 불법 이용, 무선 인증키 크래킹, 미허가 AP/디바이스에 대한 공격과 같은 취약점이 존재하고 있다. 또한 인증 고도화 및 안전한 고속 보안 접속과 같은 보안기술연구가 거의 진행되고 있지 않다. 그러므로 본 논문에서는 차세대 무선 네트워크 환경의 메시지 보호를 위한 디바이스 식별과 콘텐츠 분류 및 저장 프로토콜을 설계하여 안전한 통신 시스템을 설계한다. 제안한 프로토콜은 기존의 무선 네트워크 환경에서 발생하는 보안취약점에 관하여 안전성을 분석하였고 기존의 무선 네트워크 환경의 암호기법을 비교분석하여 보안성을 분석하였다. 기존의 암호시스템 WPA2-PSK보다는 대략 0.72배 느리지만, 보안성에서는 안전성을 강화되었다.

고문헌을 통해 본 방충향 (A Review on Ancient Literatures of Anti-insect Incense)

  • 권영숙;이경희
    • 복식문화연구
    • /
    • 제14권5호
    • /
    • pp.802-812
    • /
    • 2006
  • The purpose of this study is to investigate effects of natural incense on the preservation of paper- and textile-based remains and the kinds and applications of natural anti-insect incense by reviewing relevant literatures of the ancient times. There are few ancient literatures of incense published in Korea. The researcher deducted how incense was used in this nation through reviewing verses contained in ancient literatures and medical books. In contrast, the kinds and applications of anti-insect incense used in China, where incense culture prospered, were investigated here through reviewing technical books about incense published during the Song(宋) and Ming(明) periods, $\ll$Incense record(香譜)$\gg$, $\ll$Chen's Incense record(陳氏香譜)$\gg$ and $\ll$Incense record(香乘)$\gg$. There were several methods of keeping clothes better from insects. In relation, how to use anti-insect incense varied in accordance with main materials of clothes, paper, textile, leather and others. Cymbopogon dstans(芸香), Brassica rapu var and Incarvillea sinensis(角蒿) are anti-insect incense which were used for paper. Anti-insect incense for textiles is classified into single and mixed incenses depending on whether only one kind of incense was used or more than seven kinds of the substance. Acori rhizoma(菖蒲), Capsella bursa-pastoris(薺菜花), Lactuca sativa L., Erigeron canadensis(莽草), Stemona japonica(百部) and Moschus sifanicus(麝香) are single anti-insect incense which were used for textile. While, the latter was called. ‘Yi Xiang(衣香)’ is mixed anti-insect incense which was used for textile. Artemisia asiatica(艾葉) and Zanthoxylum schinifolium(花椒) are anti-insect incense which were used for leather. Angelica dahurica(芳香) and Bamboo are anti-insect incense which were used for others. There were three main methods of using incense to prevent insects, that is, diffusing incense's strong scent and ingredients, exposing to smokes from burnt incense and washing with incense-boiled water. Diffusing incenses had a strong scent and antibiotic ingredients, which were put between books or clothes or into a storage box without being processed. If necessary, however, they were processed into rough powders that were in turn used singly, or otherwise mixed for a stronger scent and better insect elimination. Exposing to smokes from burnt incense was done as follows. A clothes was put on 'Long(籠)' underneath which there was a boiling water. The clothes was humidified by the water and then exposed to smokes from burnt incense. 'Long(籠)' had been long used since it was manufactured in the QinHan(秦漢) period for the first time. A local literature, $\ll$Koryo TuGing(高麗圖經)$\gg$ shows that in the Koryo(高麗) period, BoShaLu(博山爐) were used as a means of exposing clothes to smokes to prevent moths, similarly to China. Washing clothes with incense-boiled water was more effective in removing lots of worms and germs from clothes, but leaving the scent and ingredients of the used incense and maintaining the effect of anti-insect.

  • PDF

대나무 추출액을 이용한 코팅쌀 제조 및 품질 특성 (Quality Characteristics and Processing of Rice Coated with Bamboo Extract)

  • 정기태;주인옥;류 정;최정식
    • 한국식품저장유통학회지
    • /
    • 제11권3호
    • /
    • pp.325-330
    • /
    • 2004
  • 대나무 추출액을 쌀에 코팅하는 조건, 코팅쌀의 취반 특성, 기능성 및 포장방법을 검토한 결과는 다음과 같다. 대나무 추출액 별 코팅 취반미의 관능은 알코을 추출액 코팅쌀이 향과 맛은 가장 양호하였으나 질감은 차이가 없었다. 대나무 알코을 추출액의 코팅량 별 쌀의 색도는 L, a, b값 모두 코팅 농도가 증가할수록 증가되었으나 밥은 L값만 감소되었으며 밥의 관능은 10$\%$ 코팅 처리에서 향과 맛이 양호하였다. 코팅쌀의 취반 후 물성은 경도, 검성, 씹힘성은 청결미 보다 높았고 응집성, 탄력성, 부착성은 낮은 경향이었다. 대나무 추출액 코팅쌀의 무기성분은 청결미보다 모든 성분 함량이 높았는데 특히 K 함량이 월등히 높았다. 코팅쌀의 취반특성은 청결미 보다 흡수율과 팽창율은 낮았으나 토요식미지수는 높았다. 코팅쌀의 포장방법 별 식미는 청결미보다 약간 우수하였으며 종이포장에서 토요식미지수와 알카리붕괴도가 가장 높았다. 코팅쌀 취반미의 24시간 저장후 총 균수는 청결미 보다 감소되었으며 물성 중 경도, 부착성, 검성, 씹힘성은 청결미 보다 컸다.

우리 쌀 밥맛 향상을 위한 취반기술 개발 연구 -제1보 소비자의 쌀 구매 및 밥 소비에 관한 실태조사- (Cooking Technique Deve1opoment to Improve the Taste of Cooked Rice: -A consumer survey on purchasing rice and cooked rice consumption-)

  • 이혜연;박희정;박영희;조용식;한귀정
    • 한국식품조리과학회지
    • /
    • 제23권4호통권100호
    • /
    • pp.452-460
    • /
    • 2007
  • 우리 쌀의 소비촉진을 유도하기 위하여 수행하고자 하는 밥맛 향상을 위한 연구의 일환으로 농촌진흥청 행사에 참여한 일반 소비자를 대상으로 쌀 구매 및 밥의 소비에 관한 실태를 조사하였다. 가정에서의 쌀 구매 형태에서는 $1O{\sim}20$ kg의 구매단위가 가장 많았고, 구입 기준은 밥맛이 약 50%로 가장 큰 요인이었으며, 다수(약 50%)가 대형마트에서 구입하고 있고, 구입 후에는 포장지 그대로(32.4%) 또는 전용용기(57%)에 담아 상온에서 보관하면서 1달에서 4개월 이내에 대부분 소비하는 것으로 나타났다(90%). 가정에서의 취반 시 쌀(52.1%) 및 물(77.6%)의 개량은 주로 눈짐작으로 이루어졌으며, 취반은 하루에 l회 또는 2회(약 70%), 주로 전기압력밥솥(44.6%)이나 가스압력밥솥(32%)을 이용하며 1회에 $2{\sim}5$인분(65%) 분량을 하는 경우가 많았다. 취반 후 밥은 즉시 먹거나(41.8%) $1{\sim}2$일(48.6%) 안에 소비하였으며 소비 시까지는 주로 보온밥솥(63.6 %)에 보관하는 것으로 나타났다. 소비자가 생각하는 밥맛에 영향을 미치는 요인으로는 품종(37.9%), 생산지역(21.3%), 보관기간(11.9%)이 높은 비율을 차지하였으며, 품종에 대해서는 모르는 경우가 많았고(40%) 아는 응답자 중에는 일미(16.6%), 일품(14.0%), 추정(13.5%)순으로 선호도가 높았다. 이상으로부터 소비자들 사이에 쌀은 필수지출 항목으로 인식되어 주식으로 지속적으로 소비되고 있음에도 불구하고 계량에 의한 취반은 낮은 비율이며 식미 향상을 위해 취반기구 및 쌀 품종에 대한 의존도가 높은 것을 알 수 있었다.

볶음공정과 산화방지제가 들기름의 산화안정성에 미치는 영향 (Effects of Roasting Process and Antioxidants on Oxidative Stability of Perilla Oils)

  • 김영언;김인환;이영철
    • 한국식품과학회지
    • /
    • 제29권2호
    • /
    • pp.379-382
    • /
    • 1997
  • 본 연구에서는 볶지않은 들깨와 볶은 들깨에서 착유한 들기름에 몇가지 산화방지제를 첨가하여 들기름의 산화안정성을 검토하였다. $190^{\circ}C$에서 20분동안 볶은 들깨와 볶지 않은 들깨에서 착유한 들기름에 ${\alpha}$-토코페롤, ${\delta}$-토코페롤을 100, 200, 300과 400 ppm, BHA, BHT와 TBHQ를 50, 100, 150과 200 ppm으로 농도별로 첨가하여 $50^{\circ}C$에서 저장하면서 과산화물가를 측정하였다. 측정한 과산화물가는 antioxidative index (항산화제를 첨가한 들기름의 유도기간/항산화제를 첨가안한 들기름의 유도기간)로 환산하여 산화적 안정성을 비교하였다. 볶지 않고 착유한 들기름보다 볶은 들깨에서 착유한 들기름의 산화안정성이 뛰어나, 볶음공정이 들기름의 산화안정성에 약 4배 정도 기여하는 것으로 나타났다. 첨가된 토코페롤류는 들기름의 산화를 촉진하였다. 합성산화방지제인 BHA는 산화방지 효과가 없었고, BHT는 미약한 산화방지 효과를 보였다. 그러나 TBHQ는 강한 산화방지 효과를 보였다. 이 결과로 미루어 볼때 TBHQ를 법적 허용 기준치인 200 ppm이내에서 첨가하였을때 들기름의 저장안정성을 약 5배 이상 향상시킬 수 있을 것으로 예상되며, TBHQ가 들기름의 산화 안정성 향상에 가장 적합한 산화방지제로 판단되었다. 또한 볶음조건을 조절함으로써 들기름의 산화안정성에도 기여할 것으로 판단되었다.

  • PDF