• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2169-2171
• /
• 2001

The vacuum gauge control system has been designed and implemented using multi-serial communication controllers (MSCC) for the 2.5 Gev storage ring at the Pohang Accelerator Laboratory (PAL). There are 20 Balzers vacuum gauges and 17 Granville-Phillips vacuum gauges at the storage ring. A MSCC have two RS485 (max speed 460.8Kbps) field network port, 8 channel serial communication ports (max speed 460.8Kbps) connected to gauge controller for serial communication control. 12 MSCCs are connected to a personal computer (PC) through the RS485 field network. The PC can automatically control the MSCCs by sending set of commands through the network. The commands specify the duration of the MODBUS protocol. Upon receiving a command from a PC running under Windows2000 through the network, the MSCC communicate through the serial output ports to gauge controller. In this paper, we describe control structure and scheme of the vacuum gauge control system.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.279-287
• /
• 2020

Recently, the demand for underground-type ammunition storage facilities has increased. Comparing with a ground-type ammunition storage facility, the underground-type ammunition storage facility can decrease the standard of safety distance because fragment and blast wave can be locked in the rock formation. However, the absence of a design method on the underground-type ammunition storage chamber became a major setback for the construction promotion. In this study, the process for designing an overall configuration of the underground-type ammunition storage facility was provided. First, the determination method for configuration and number of the chamber was developed by performing the ammunition storage simulation. Then, a tunnel (i.e., transfer channel for vehicles) and designed chambers can be arranged on the basis of safety distance standard. The safety distance standard also should be considered for determining the location and the size of entrances because of the blast wave and fragment effect at the entrances when an explosion is generated inside a chamber. In addition, considerations on the design for the waterproof and the drainage of subsurface water were analyzed through construction cases. Finally, an example of designing underground-type ammunition storage chambers was provided in order to verify the developed design process.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.1
• /
• pp.3-6
• /
• 2013

Purpose: The treatment of thyroid cancer patients was continuously increased. According to the increment of thyroid cancer patients, the establishment of iodine therapy site was also increased in each hospital. This treatment involves the administration of radioactive iodine, which will be given in the form of a capsule. Therefore, protections and managements for radioactive source pollution and radiation exposure should be necessary for radiation safety. Among the many problems, the problem of disposing the radioactive wastes was occurred. In this study, The date for self-disposal for radioactive wastes, which were contaminated in clothes, bedclothes and trash, were calculated. Materials and Methods: The number of iodine therapy ward was 15 in Korea Institute of Radiological Medical and Sciences. Recently, 8 therapy wards were operated for iodine therapy patients and others were on standby for emergency treatment ward of any radiation accidents. Radioactive wastes, which were occurred in therapy ward, were clothes, bedclothes, bath cover for patients washing water and food and drink which was leftover by patients. Each sample was hold into the marinelli beaker (clothes, bedclothes, bath covers) and 90 ml beaker (food, drink, and washing water). The activities of collected samples were measured by HpGe MCA device (Multi Channel Analysis, CANBERRA, USA) Results: The storage period for the each kind of radioactive wastes was calculated by equation of storage periods based on the measurement outcomes. The average storage period was 60 days for the case of clothes, and the maximum storage period was 93 days for patient bottoms. The average storage period and the maximum storage period for the trash were 69 days and 97 days, respectively. The leftover foods and drinks had short storage period (the average storage period was 25 days and maximum storage period was 39 days), compared with other wastes. Conclusion: The proper storage period for disposing the radioactive waste (clothes, bedclothes and bath cover) was 100 days by the regulation on self-disposal of radioactive waste. In addition, the storage period for disposing the liquid radioactive waste was 120 days. The current regulation for radioactive waste self-disposing was not suitable for the circumstances of each radioactive therapy facility. Therefore, it was necessary to reduce the leftover food and drinks by adequate table setting for patients, and improve the process and regulation for disposing the short-half life radioactive wastes.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.179-182
• /
• 2001

This paper has been studied a wavelet based still image transmission over the wireless channel. EZW(Embedded Zerotree Wavelet) is an efficient and scalable wavelet based image coding technique, which provides progressive transfer of signal resulted in multi-resolution representation. It reduces therefore the reduce cost of storage media. Although EZW has many advantages, it is very sensitive on error. Because coding are performed in subband by subband, and it uses arithmetic coding which is a kind of variable length coding. Therefore only 1∼2bit error may degrade quality of the entire image. So study of error localization and recovery are required. This paper investigates the use of reversible variable length codes(RVLC) and data partitioning. RVLC are known to have a superior error recovery property due to their two-way decoding capability and data partitioning is essential to applying RVLC. In this work, we show that appropriate data partitioning length for each SNR(Signal-to-Noise Power Ratio) and error localization in wireless channel.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.1 no.1
• /
• pp.40-49
• /
• 2001

We have developed a repeatable process of forming uniform, small-size and high-density self-assembled Si nano-crystals. The Si nano-crystals were fabricated in a conventional LPCVD (low pressure chemical vapor deposition) reactor at $620^{\circ}c$ for 15 sec. The nano-crystals were spherical shaped with about 4.5 nm in diameter and density of $5{\times}l0^{11}/$\textrm{cm}^2$. More uniform dots were fabricated on nitride film than on oxide film. To take advantage of the above-mentioned characteristics of nitride film while keeping the high interface quality between the tunneling dielectrics and the Si substrate, nitride-oxide tunneling dielectrics is proposed in n-channel device. For the first time, the single electron effect at room temperature, which shows a saturation of threshold voltage in a range of gate voltages with a periodicity of ${\Delta}Ｖ_{GS}\;{\approx}\;1.7{\;}V$, corresponding to single and multiple electron storage is reported. The feasibility of p-channel nano-crystal memory with thin oxide in direct tunneling regime is demonstrated. The programming mechanisms of p-channel nano-crystal memory were investigated by charge separation technique. For small gate programming voltage, hole tunneling component from inversion layer is dominant. However, valence band electron tunneling component from the valence band in the nano-crystal becomes dominant for large gate voltage. Finally, the comparison of retention between programmed holes and electrons shows that holes have longer retention time.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.117-128
• /
• 2005

Korea is affected by typhoon 2-3 times a year, and 50${\sim}$60 % of annual rainfall is concentrated during summer with heavy daily precipitation. Recently such natural conditions cause many of failures or damages of reservoirs and embankments. Overflow by heavy flood is the main cause that results 54.2 % of total embankment failures with damages of spillway, outlet channel and stilling basin. Since damages by overflow are triggered by scour of soils nearby the structures, use of proper backfill materials with great resistance against erosion should be considered and application of suitable construction method to protect erosion may be adopted. Most failures of levee are caused by piping along the surface of cross-structure underneath levee. Such failures may be protected by deep consideration of piping at the stage of design and good quality control during construction. Sufficient magnitude of spillway and outlet channel is the ideal way to prevent failures by the flood. For existing structures, remodeling with reinforcement to protect against flood with review of required storage of dam should be considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.880-886
• /
• 2009

Recently, the memory is used in many electronic devices, thus, the many researchers make a study of the memory. To increase a storage capacity per memory block, the researchers study for reducing the fabrication process of memory and multi-level cell memory which is storing more than 2-bits in a cell. However, the multi-level cell memory has low bit-error rates by various noises. In this paper, we study the noise of multi-level cell memory, and we propose the channel model of multi-level cell memory.

• Water for future
• /
• v.23 no.3
• /
• pp.385-395
• /
• 1990

Three-parameter Muskingum flood routing model which incorporated the inflows alongside the river channel is applied for the Waegwan-Jeukpogyo reach of the Nakdong River using the flood data of 12 selected flood events experienced in this reach. The flood routing equations for three-parameter model were expressed as a system of finite difference equations and the routing constants were directly computed by matrix inversion method. Then, the three parameters, which consist of the storage constants(K), weighting fator(x), and lateral inflow parameter(α), were determined from the computed routing constants. The results of the present study showed that the model can predict with a fair accuracy the flood discharges at the downsteam end of the reach. The parameters K and x were seen as channel parameters which have close relations with the flood magnitude, whereas the lateral inflow parameter was shown to be strongly governed by the rainfall characteristics of the tributary watersheds contributing to the lateral inflows.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.739-743
• /
• 2013

In this paper, a two-dimensional (2-D) channel code for magnetic patterned media is proposed. Patterned media records an information bit on a magnetized dot. Since the space between adjacent tracks is narrow in order to increase the storage density, inter-track interference (ITI) and inter-symbol interference (ISI) can be problems. The amplitude of a bit signal can be corrupted by the 2-D ISI. The signal of the bit surrounded by the same value can be especially destructive, i.e. when its value is the same as the values of the eight surrounding bits. The proposed modulation coding scheme improves the decoding performance of patterned media by preventing this worst case and provides a better code rate than conventional channel codes.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.685-689
• /
• 2009

Flash memory has several features such as low~power consumption and fast access so that there has been various research on using flash memory as new storage. Especially the Solid State Disk which is composed of flash memory chips has recently replaced the hard disk. At present, SSD adopts the multi-channel and multi-way architecture to exploit advantages of parallel access. In this architecture, data are written on SSD in a unit of a superblock which is composed of multiple blocks in which some blocks are put together. This paper proposes two schemes of selecting, segmenting and re-composing victim superblocks to optimize concurrent processing when a buffer flush occurs. The experimental results show that 35% of superblock- based write operations is reduced by selecting victims and additional 9% by composition of superblock.