• The Journal of Korea Robotics Society
• /
• v.11 no.3
• /
• pp.183-192
• /
• 2016

Generating motion of center of mass for biped robots is a challenging issue since biped robots can easily lose balance due to limited contact area between foot and ground. In this paper, we propose force control method to generate high-speed motion of the center of mass for horizontal direction without losing balancing condition. Contact consistent multi-body dynamics of the robot is used to calculate force for horizontal direction of the center of mass considering balance. The calculated force is applied for acceleration or deceleration of the center of mass to generate high speed motion. The linear inverted pendulum model is used to estimate motion of the center of mass and the estimated motion is used to select either maximum or minimum force to stop at goal position. The proposed method is verified by experiments using 12-DOF torque controlled human sized legged robot.

• The Journal of Korean Physical Therapy
• /
• v.27 no.1
• /
• pp.43-49
• /
• 2015

Purpose: The aim of the current study was to examine the effects of hinged ankle-foot orthosis (HAFO) on walking function in children with spastic diplegic cerebral palsy (CP). Methods: Thirty-two children (mean age: $6.79{\pm}0.35years$, age range: 5-7 years) who were diagnosed with spastic diplegic cerebral palsy participated in the study. Each subject typically walked through 10 meters of a gait platform with markers on the subject's proper body segments and underwent 3-D motion analysis system with and without hinged ankle-foot orthosis. The HAFOs were all custom-made for individual CP children and had plantarflexion stop at $0^{\circ}C$ with no dorsiflexion stop. The interventions were conducted over three trials in each group, and measurements were performed on each subject by one examiner in three trials. 3-D motion analysis system was used to measure gait parameters such as walking velocity, cadence, step-length, step-width, stride-length, and double support period in two conditions. Results: The walking velocity, cadence, step-length, and stride-length were significantly greater for the HAFO condition as compared to the no HAFO condition (p<0.05). However, no significant difference in step-width and double support period was observed between two conditions. Conclusion: These findings suggest that using the HAFO during walking would suggest positive evidence for improving the spatiotemporal parameters of gait in children with spastic diplegic cerebral palsy.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.1-7
• /
• 2018

Gentry is responsible for moving the fine chip in the device that mounts the chip on the PCB. However, it is not easy to increase productivity because of the mechanical limitations of the gantry. Therefore, in this paper, we try to solve the method to increase the productivity by software. For this purpose, we propose a method to improve the productivity by shortening the movement time of the gantry. First, we calculated the total travel time for the current method(stop-motion). In addition, the total travel time is also calculated for the travel time reduction method presented in this paper. This method reduces the travel time by checking parts without stopping in front of the camera. As a result, we showed that the proposed method shortened the time of 16%. In the future, we will study time calculation methods for other types.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.92-95
• /
• 2004

This study proposes an industrial rehabilitation robot system which can exercise two joints in 3 dimensional spaces. The robot kinematics analysis and the results of studies on each joint for the rehabilitation robot could verify possibility of rehabilitation motion to exercise a joint. The force and torques sensor not only measures a rehabilitation performance of subjects between the abnormal limb and the manipulator, but also carries out an important function of safety device to prevent accidents. Also, limit sensors and emergency stop switch are used for high safety in this system. In this real test, the possibility of rehabilitation robot system is evaluated by C&R ARM I which is similar to upper-limb.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.389-396
• /
• 1988

Microprocessor-based software DDA interpolator is developed and applied to two axis contouring control of X-Y table. Developed assembly program is composed of feedrate, linear and circular DDA interpolation routines. Reference-pulse type of open-loop stepping motor control system in which the micro-computer produces a sequence of reference pulses for each axis of motion is adopted. To test performance of the developed program, X-Y table drive system based on stepping motor and shaft encoder is designed. Conturing error of the system in linear and circular path is within .+-. 0.2mm under start stop pulse rate of stepping motor.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.4
• /
• pp.287-294
• /
• 2004

Dynamic Load/unload (L/UL) mechanism is an alternative to the contact start stop (CSS) technology which eliminates striction and wear failure modes associated with CSS. Inertia latch mechanism becomes important for mobile disk drives because of non operating shock performance. Various types of latch designs have been introduced in hard disk drives to limit a rotary actuator from sudden uncontrolled motion. In this paper, a single spring inertia latch is introduced for a small form optical disk drive, which uses a rotary actuator for moving an optical pick-up. A new small inertia latch with sin91e spring is designed to ensure both feasible and small size. The shock performance of the new inertia latch is experimentally verified.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.1122-1129
• /
• 2001

In this work, we propose a new type of HDD suspension featuring shape memory ally (SMA) actuator in order to prevent the contact between the slider and disk. The principal design parameters are obtained from the modal analysis using finite element analysis, and then the dynamic model is established to formulate the control scheme for Non-Contact Start/Stop mode drive. Subsequently, a robust Η$_{\infty}$, control algorithm is designed by integrating experimentally-obtained SMA actuator dynamics to the proposed suspension system. The controller is empirically realized and control results for different load/unload profiles are presented in time domain. In addition, the contact signal between the slider and disk is measured by the electrical resistance method.istance method.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.33-40
• /
• 2010

Vibration of a hydraulic excavator's body and boom occurs when the boom quickly stops after upward or downward motion. The main objective of this research is to present an idea of suppressing the vibration. Three parameters which affect the vibration are defined and analyzed thoroughly and a heuristic method suppressing the vibration is presented in this paper. Experimental results show that the proposed method works very well.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.5
• /
• pp.390-396
• /
• 2017

In this paper, an exact mathematical model is derived for an exhaust gas recirculation (EGR) valve actuator driven by an H-bridge converter. Particularly, a spring torque model of the EGR valve is proposed. The spring torque model is proposed by converting spring force and Coulomb frictional force in linear motion into a rotational torque. Moreover, a mechanical end-stop model was proposed by the valve mechanism. The accuracy of the proposed model is verified by comparing the experimental results with the simulated results.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.562-572
• /
• 1992

In this paper, we propose software algorithms which provide acceleration/deceleration characteristics essential to high dynamic performance at the transient states where industrial robots or CNC machine tools start and stop. Software acceleration/deceleration methods are derived from the mathematical analyses of typical hardware systems controlling acceleration/deceleration. These methods make servo motors, which drive axes of motion, start and stop smoothly without vibration in the repeated tools. The path error, which is one of the most significant factors in the performance evaluation of industrial robots or CNC machine tools, is analyzed for linear, exponential, and parabolic acceleration/deceleration algorithms in case of circular interpolation. The analyses show that path error consists of the distance between the required path and generated one through acceleration/deceleration, and that between the generated one through acceleration/deceleration algorithm and the actual one of the end effector of the industrial robot or tool of the CNC equipment.