• The Research Journal of the Costume Culture
• /
• v.11 no.4
• /
• pp.562-577
• /
• 2003

The object of my research is to inquiry into the immediate constituent and techniques of underwear after looking into basic theory of underwear, techniques by materials classified according to the matter of elasticity, and studying flat pattern and draping which are basis of corset and brassiere structure focusing on corsetry among underwears and production techniques. Various papers are referenced for theoretical study and the elements and techniques of underwear are analyzed based on photographical materials. This paper concludes as follows. To make the flat pattern of corset and brassiere fit to the body tightly, design dart two times without any space and draw smaller than the body. To support the breast sufficiently, move the side seam 1¼″ to the front panel and the seam should pass the apex in all occasions. For draping, dart should be added into short of elasticity materials in the past but dart is no use these days since the material today is extremely elastic. It is possible now to show the body line with only the seam or a pattern. In a case of elastic material, set the elastic direction to the grain line and have a draping as pulling from the center to the out side. As production technic, for an hem, put a zigzag stitch in elastic materials with a 10-20% short elastic band, pulling the band. Then make 3/16″-1/4″ short inseam.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.196-199
• /
• 2008

The piercing is increasing in western culture, and has also become gradually popular among Korean teenagers recently However, the accident hap-pens sometimes such as loss of a bar into the tongue or mouth floor during the procedure. Because of the rare cases, few treatment of choices can be made when a bar is lost inside the mouth floor. In this case, the bar was removed under fluoroscope, without giving significant damage to the adjacent structure. 18 years old female patient visited the emergency room in our hospital. She attempted to pierce her tongue herself and could not find the bar which was lost in the mouth floor. The radiographs revealed that the needle was somewhere inside the mouth floor, but if incision were to be made it would be too deep to find the bar. The bar was removed through fluoroscope easily. Primary closure was done by 5-0 Vicryl and stitch-off was done 1 week later. The patient didn't have any speech problems and complications.

• Journal of KIISE:Software and Applications
• /
• v.28 no.11
• /
• pp.855-863
• /
• 2001

We propose an image alignment algorithm based on variable-sized blocks of cylindrical prototype model to generate a face texture for a realistic 3D face model. This is a block matching algorithm which aligns 2D images of a 3D cylindrical model using th correlation between them. While matching blocks, it does not use same sized blocks with considering a curvature of 3D model. And we make a texture of aligned images using a technique of image mosaic. For this purpose, we stitch them with assigning linear weights according to the overlapped region and using the cross-dissolve technique.

• Journal of the Korean Society of Industry Convergence
• /
• v.15 no.3
• /
• pp.79-82
• /
• 2012

Aim of this study is to investigate the dimensional characteristics of the weft knitted fabrics with Bamboo knitted yarn. This Bamboo knitted yarn was made of the biodegradability fiber. The structure of weft knitted fabrics that was utilized for this study is the plain stitch, which is the most basic structure among all weft knitted fabrics. The loop density, courses density, and wales density are more increased as the loop length is shorter. The loop density increased as pre-treatment process and dyeing process progressed after dry treatment process, and on the contrary, the heat setting process made it decreasing. After the dyeing process proceed, the loop density and the course density were displayed the highest values. When the knitted fabrics were fully relaxed, the loop density was $2000/in^2$, the courses density was 52/in, the wales density was 39/in.

• Journal of Fashion Business
• /
• v.3 no.3
• /
• pp.49-57
• /
• 1999

In this study, the researcher studied the historical background and the traditional culture about dress of Bouyei People of Guizhou Province. The resuits of the study ara as follows. 1. Women's dress and adorment can be categorized into three styles. In the Zhenning, Guanling and Puding regions and northwestern areas of Guizhou Province, women usually wear blouses with overlapping necks, batik pleated skirts and long aprons. They also wear embroidered kerchiefs or turbans. In the suburbs of Guiyand City and Southwestern Guizhou Province, women like to wear blouses with buttons arranged diagonally on the front, trousers, blue or black and white check cloth kerchiefs. In the Luoping region, women wear blouses with loose sleeves and buttons arranged diagonally on the front and loose-legged trousers. 2. Men usually wear shirts with buttons down the front or arranged on the front, trousers and calottes. 3. Most of their dress materials are white and coloured handwoven, tie-dyed or batik cloth. The exquisite technique of batik and tie-dyeing has a long history, which began to become prevalent in the Song Dynasty. 4. Now, people use all kinds of techniques to make their dress and adornment, including batik, tie-dyeing, cross-stitch, brocade and embroidery, which reflect their peculiar aesthetic temperament.

• Journal of Fashion Business
• /
• v.12 no.2
• /
• pp.42-58
• /
• 2008

The purpose of this study is to examine actual design cases of decorative detail in the Art Nouveau style from the end of 19th century to the beginning of 20th century, and create designs and fashion works to meet our contemporary fashion trends by means of over-decorative style, a characteristic of decorative detail. The characteristics of decorative detail in the Art Nouveau style can be outlined as follows: First, pleats appear with two major feels of solidity, undulated and curvilinear solidity based on gather(ruffle, frill/ flare and flounce) and regular and linear solidity based on linear pleats or tucks. Second, embroidery appears in various patterns developed with stitch of solid feel as well as a variety of coloration effects. Third, attachments are expressed by means of independent motif(applique, gloss effects(beads, sequins), affluent texture and mobility(fur, feather). Moreover, according to technical characteristics and expressive aspects of pleats, embroidery and attachments, it is found that decoration detail in the era of Art Nouveau is over-decoration style. Indeed, it appears in major expressive aspects such as rhythmical solid type, detailed prominence type, superficial touch type and profound volume type.

• Clinics in Shoulder and Elbow
• /
• v.8 no.1
• /
• pp.31-35
• /
• 2005

The purpose of this study was to evaluate the drainage effect of silk suture following aspiration of the bursa as an early treatment of chronic olecranon bursitis. Eleven cases, which have over two weeks of history and over one year of follow-up, were investigated. The average duration of follow-up was 17.5 months. The average symptom duration was 1.8 months. With an aseptic technique, the aspiration of the bursa was done with 18gauge needle and syringe and then the insertion of silk suture through the aspiration needle was performed. The amount of drainage was regularly checked $2{\sim}3$ days interval and stitch out was done at the cessation of drainage. At the follow-up, recurrence, infection, pain, and limitation of range of motion were investigated by telephone interview. Redness around the insertion site of silk suture was found in all cases, but there was no active infection or recurrence. The results were satisfactory in all cases and the average time for recovery was 10.5 days. The drainage with silk suture following aspiration of the bursa is less invasive and very effective method in the early treatment of chronic olecranon bursitis.

• Journal of Home Health Care Nursing
• /
• v.19 no.1
• /
• pp.5-10
• /
• 2012

Background: The purpose of this study is to investigate the needs for wound care services in the elderly care institutions by analyzing hospital-based home care nursing in select facilities in Korea. Methods: A total of 92 staffs at the elderly care institutions, located throughout the country, completed self-report questionnaires between February 1 and November 31, 2009. SPSS ver. 17.0 was used for data analysis, regarding frequency and chi square. The 5% level of significance was the critical level for acceptance of the study's hypotheses. Results: Results were as follows; group A and group B were rated as 'high' and 'very high', respectively, in care of simple pressure ulcer, care of complicated pressure ulcer, stitch out, care of simple surgical wound, ostomy care, complicated ostomy care, simple dressing and complicated dressing. Conclusion: Political decisions intended to promote visits by hospital- based home care nurses to the elderly care institutions would be a prudent course.

• International Journal of CAD/CAM
• /
• v.9 no.1
• /
• pp.37-46
• /
• 2010

Existing methods for the registration of blurred images are efficient for the artificially blurred images or a planar registration, but not suitable for the naturally blurred images existing in the real image mosaic process. In this paper, we attempt to resolve this problem and propose a method for a distortion-free stitching of naturally blurred images for image mosaic. It adopts a multi-resolution and robust feature based inter-layer mosaic together. In each layer, Harris corner detector is chosen to effectively detect features and RANSAC is used to find reliable matches for further calibration as well as an initial homography as the initial motion of next layer. Simplex and subspace trust region methods are used consequently to estimate the stable focal length and rotation matrix through the transformation property of feature matches. In order to stitch multiple images together, an iterative registration strategy is also adopted to estimate the focal length of each image. Experimental results demonstrate the performance of the proposed method.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.17-22
• /
• 2007

Recent new packages such as MCP(Multi-Chip Package), QDP(Quadratic Die Package) and DDP(Dual Die Package) have stack type configuration. This kind of multi-layer package is thicker than single layer package. So there is need for the low height looping technology in wirebonder to make these packages thinner. There is stiff zone above ball in wirebonder wire which is called HAZ(Heat Affect Zone). When making low height loop (below $80\;{\mu}m$) with traditional forward loop, stiff wire in HAZ(Heat Affected Zone) above ball is bended and weakened. So the traditional forward looping method cannot be applied to low height loop. SSB(stand-off stitch) wire bonding method was applied to many packages which require very low loops. The drawback of SSB method is making frequent errors at making ball, neck damage above ball on lead and the weakness of ball bonding on lead. The alternative looping method is BNL(ball neckless) looping technology which is already applied to some package(DDP, QDP). The advantage of this method is faster in bonding process and making little errors in wire bonding compared with SSB method. This paper presents the result of BNL looping technology applied in assembly house and several issues related to low loop height consistence and BNL zone weakness.