• 반도체디스플레이기술학회지
• /
• 제11권2호
• /
• pp.63-69
• /
• 2012

As decreasing size of chips, the need of wafer level packaging is increased in semi-conductor and display industries. Temperature uniformity is a crucial factor in vacuum soldering process to guarantee quality of bonding between chips and wafer. In this paper, a stepwise iterative algorithm has been suggested to obtain output profile of each heat source. Since this algorithm is based on open-loop stepwise iterative experimental technique, it is easier to implement and cost effective than real time feedback controls. Along with some experiments, it was shown that the suggested algorithm can remarkably improve temperature uniformity of wafer during whole heating process compared with the ordinary manual trial-and error method.

• 통상정보연구
• /
• 제8권1호
• /
• pp.69-86
• /
• 2006

The trade volume between South and North Korea has reached 1 billion dollars in year 2005. This means the economic motives may prevail over the political concerns between two regimes from now on. At the same time, the direct telecommunication lines installed to promote the IT collaboration. Based on these monumental issues, the research focuses on the workable mechanism of the South-North Korean e-Market Place(e-MP) collaboration project. The research analyzes on the capabilities as well as willingness of the South and North Korea for the e-MP, and concludes with four stepwise approach to promote the South and North Korean e-MP. The first step initiates the web marketing integration, and then the second step provides the legal environments. The third step promotes the on-/off- trade-automation via infrastructure collaboration, and the final step expands and deepens the flexibility as well as openness of the e-MP.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권4호
• /
• pp.277-281
• /
• 2006

Cyber counseling, one of the most compatible type of consultation for the information society, enables people to reveal their mental agonies and private problems anonymously, since it does not require face-to-face interview between a counsellor and a client. However, there are few cyber counseling centers which provide high quality and trustworthy service, although the number of cyber counseling center has highly increased. Therefore, this paper is intended to enable an appropriate consultation for each client by analyzing client propensity using Bayesian variable selection. Bayesian variable selection is superior to stepwise regression analysis method in finding out a regression model. Stepwise regression analysis method, which has been generally used to analyze individual propensity in linear regression model, is not efficient since it is hard to select a proper model for its own defects. In this paper, based on the case database of current cyber counseling centers in the web, we will analyze clients' propensities using Bayesian variable selection to enable individually target counseling and to activate cyber counseling programs.

• 분석과학
• /
• 제18권6호
• /
• pp.460-468
• /
• 2005

The biotin-avidin complex, as a model recognition system, has been constructed through N-hydroxysuccinimide(NHS) reaction on a variety of substrates such as a smooth Au film, electrochemically roughened Au electrode and chemically modified mica. Stepwise self-assembled monolayers (SAMs) of biotin-avidin system were characterized by surface-enhanced resonance Raman scattering (SERRS) spectroscopy, atomic force microscopy (AFM) and surface plasmon resonance (SPR). A strong SERRS signal of rhodamine tags labeled in avidin from the SAMs on a roughened gold electrode indicated the successful complex formation of stepwise biotin-avidin recognition system. AFM images showed the circular shaped avidin aggregates (hexamer) with ca. $60{\AA}$ thick on the substrate, corresponding to one layer of avidin. The surface coverage and concentration of avidin molecules were estimated to be 90% and $7.5{\times}10^{-12}mol/cm^2$, respectively. SPR technique allowed one to monitor the surface reaction of the specific recognition with high sensitivity and precision.

• Ocean Systems Engineering
• /
• 제12권4호
• /
• pp.413-437
• /
• 2022

An innovative concept for wet-transportation and stepwise installation of mono-bucket foundation for 15 MW offshore wind turbine is proposed. Case studies for two different mono-bucket and wrap-buoy dimensions are conducted and their hydrostatic and hydrodynamic performances are compared for both wet-towing and lowering operations. The intact stability and transient responses are analyzed in detail for various stages of lowering operation. Wave-induced motion statistics during wet tow in sea state 4 (highest operational window) are checked. The proposed concept is found to be feasible and can be an alternative cost-effective solution without using heavy-lift crane vessel in practice.

• 한국항해항만학회지
• /
• 제44권3호
• /
• pp.187-194
• /
• 2020

항만의 주요 정책 및 향후 운영계획 수립 시 정확한 물동량 예측에 관한 연구는 매우 중요하며 이러한 중요성으로 인해 관련 연구가 활발히 수행되고 있다. 본 논문에서는 국내 최대 석탄 및 철광석 처리 항만인 광양항을 대상으로 단계적 회귀분석과 인공신경망모형을 활용하여 모형간 예측력을 비교하였다. 2009년 1월부터 2019년 1월까지 총 121개월의 월별자료를 활용하였으며 석탄 및 철광석 물동량에 영향을 주는 요인을 선정하여 공급관련요인과 시장·경제관련요인으로 분류하였다. 단계적 회귀분석 결과, 광양항 석탄 물동량 예측모형의 경우, 입항선박 톤수, 석탄가격 및 대미환율이 최종변수로 선정되었고 철광석 물동량 예측모형의 경우, 입항선박 톤수, 철광석가격이 최종변수로 선정되었다. 인공신경망모형의 경우, 모델 성능에 영향을 미치는 다양한 Hyper-parameters를 조정하며 최적 모델을 선정하는 시행착오법을 사용하였다. 분석결과 인공신경망모형이 단계적 회귀분석에 비해 우수한 예측성능을 나타내었으며 예측 모형별 예측값과 실측값을 그래프 상 비교 시에도 인공신경망모형이 단계적 회귀분석에 비해 고·저점을 유사하게 나타냈다.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1875-1877
• /
• 2005

• 품질경영학회지
• /
• 제37권3호
• /
• pp.83-93
• /
• 2009

This study proposes a stepwise approach to product safety management(PSM), of which roadmap consists of five phases. ISO 9001 QM model is assumed as the first-phase model and each higher-phase model is built by adding a corresponding module to the lower one. In the phase order, those modules are CCMS, a failure to warn, manufacturing defect and design defect. The progress in PSM of a domestic food company is discussed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 1993년도 제1회 학술강연회논문집
• /
• pp.55-61
• /
• 1993

An experimental investigation was conducted in order to determine the flammability limit of the solid fuel ramjet using the backward facing step flow combustion of the plexiglass grain. In order to get the different step height ratio, the grain was drilled straight forward or stepwise. The Phoenics computer code was adopted in order to compare. the flow patterns of the some sample tests using a non-reacting cold turbulent flow model. The stepwise grain give some loading advantage; specially thin and long shape grain design.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.77-78
• /
• 2015

Laminar burning velocities have been predicted by constant volume combustion chamber, counter flow burner and others. In this study, the measured flame propagation velocities in an assembled annular stepwise diverging tube were plotted with respect to equivalence ratio, length scale, and velocity scale. Three dimensional approach to understand the flame propagation velocity including laminar burning velocity is investigated, and the surface provides the correlation among quenching distance, propagation velocity, and equivalence ratio.