• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권6호
• /
• pp.712-716
• /
• 2010

본 논문에서는 레퍼런스 시퀀스에 기가 시퀀싱데이터를 매핑하여 얻어지는 커버리지 데이터를 이용한 모양 기반의 단위반복변이 영역 (CNVR) 추출 방식을 제안한다. 제안하는 CNVR 검색 알고리즘은 후보 영역 추출 단계와 후처리 단계로 이루어진다. 후보 영역 추출 단계에서는 추출하고자 하는 CNV의 모양을 입력 변수로 조절하여 다양한 높이 및 크기를 갖는 CNV 후보 영역을 추출한다. 다음, 후처리 단계에서는 레퍼런스 시퀀스와 기가 시퀀싱 데이터에 포함되어 있는 시퀀싱 에러 문제를 보완하기 위하여, 레퍼런스 시퀀스의 에러 영역 보정, GC-content 영역 보정 등의 정제 과정을 거친 후, 최종 CNVR을 추출한다. 제안된 방식의 유용성을 보이기 위하여 "1000 게놈 프로젝트"에 의하여 공개된 실 데이터를 이용한 다양한 실험을 수행하였으며, DGV를 이용하여 추출된 CNVR의 정확도를 검증하였다. 실험 결과에 의하면 제안된 방식은 HLA 영역에 존재하는 반복되거나 결실되는 다양한 모양의 CNV를 효율적으로 검출하였다.

• 한국운동역학회지
• /
• 제17권4호
• /
• pp.27-36
• /
• 2007

The purpose of this study was to investigate the effect of the upper body in order to increase a propulsive force in the old's walking. The subjects were each 10 males, the latter term of the aged and former term of the aged. There were three walking speeds of slow(about 5km/h), medium(about 6km/h), and maximum speed(about 7km/h). The subjects walking 11m were filmed the 5m section (from 3m to 8m) by 2-video cameras using three dimensional cinematography. And we computed different mechanical quantities and especially computed the relative momentum in order to achieve this study's aim. In this study, we was able to acquire some knowledge. The step length and step frequency increased in proportion to the walking speed, and the faster walking speed, the shorter ratio of supporting time( both legs supporting time/one step length time). When it was one leg support phase, the torso was indicated to generate the momentum in order to produce the propulsive force of walking. The upper and lower body had a cooperative relation for walking such as keeping step rate with the arms to legs and maintaining the body balance. The opposition phase for upward-and-downward direction of the torso and arms in walking was functioned to prevent the increase rapidly toward vertical direction of the center of gravity. The arms had contributed to coordinate the tempo of legs and the posture maintenance of the upper body. And by absorbing the relative momentum from the upper torso with arms to the lower torso, it had the rhythmical movement on upward-and-downward direction reducing the vertical reaction force. On account of the relations of absorption and generation of the propulsive force and the production of vertical impulse in the lower torso when walking by maximum speed, it was showed that the function of lower torso was come up as important problem for the mechanical posture stability and propulsive force coordination.

• 한국자원식물학회지
• /
• 제28권6호
• /
• pp.697-703
• /
• 2015

Twenty apple germplasm accessions from the Korean Genebank were successfully cryopreserved using two-step freezing to back up genetic resources maintained by field collections. This study examined the morphological and genetic stability of cryopreserved dormant apple buds that were stored in liquid nitrogen, and then rewarmed and regrown. Whole plants were regenerated directly from dormant buds through budding without an intermediary callus phase. The cryopreserved buds produced high levels of shoot formation (76.2-100%), similar to those of noncryopreserved buds (91.3-100%), with no observed differences between cryopreserved and noncryopreserved materials. Three of the twenty cryopreserved apple germplasm accessions were used to assess morphological and genetic stability. No differences in morphological characteristics including shoot length, leaf shape, leaf width/length ratio, and root length were observed between controls (fresh control and noncryopreserved) and cryopreserved plantlets. The genetic stability of regenerants (before and after cryopreservation) was investigated using inter simple sequence repeat (ISSR) markers. The ISSR markers produced 253 bands using four primers, ISSR 810, SSR 835, ISSR 864, and ISSR 899. These markers showed monomorphic banding patterns and revealed no polymorphism between the mother plant and regenerants before and after cryopreservation, suggesting that cryopreservation using two-step freezing does not affect the genetic stability of apple germplasm. These results show that two-step freezing cryopreservation is a practical method for long-term storage of apple germplasms.

• 한국환경생태학회지
• /
• 제22권6호
• /
• pp.666-678
• /
• 2008

최근 한국에서는 각종 개발계획에서 자연환경과 생태계를 구체적으로 고려할 수 있는 실천방안으로서 비오톱에 대한 관심이 높아지면서 각 지자체마다 비오톱지도 작성에 대한 요구가 빠르게 확산되고 있다. 하지만, 아직 통일된 비오톱 유형 및 분류체계, 분류기준에 대한 표준안이 없으며, 지자체마다 서로 다른 방법론이 적용되고 있는 실정이다. 이러한 문제의식 속에서 우선 지금까지 선행된 국내 외사례의 비오톱 유형 및 분류체계, 분류기준 등을 비교 검토하여, 비오톱 유형분류 및 분류체계의 초안을 작성하였다. 또한, 선정된 대표지역의 현장조사와 자문회의 등의 계속적인 피드백 과정을 통하여 한국에 적합한 비오톱 유형 및 분류체계를 개발하고자 하였다. 조사결과 국내사례의 비오톱 유형분류체계는 2단계나 3단계 분류체계가 혼합되어 있으며, 주로 대분류, 소분류의 2단구조로 구성되어있다. 또한, 일반적으로 적용되고 있는 비오톱 유형분류기준으로는 토지이용, 토양피복율, 녹피율, 식생 등 이었다. 본 연구에서는 비오톱 유형분류를 위해 대분류(biotope class), 중분류(biotore group), 소분류(biotope type), 세분류(sub-biotope type)의 4단계 분류체계를 제시하였으며, 대분류 13개 유형, 중분류 45개 유형, 소분류 127개 유형으로 비오톱유형을 분류하였다. 하지만, 비오톱 유형분류는 지역의 특성이 고려되어야 하므로, 본 연구에서 제안한 분류체계를 기반으로 하여 소분류 및 세분류 단계에서 새로운 유형들이 계속적으로 추가 보완되어야 할 것이다.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.377-391
• /
• 1997

We consider the characterized curriculum of industrial engineering for training the excellent technician. We classified many kinds of jobs in the industry and information society and compared them with the curriculums of 13 junior colleges sampled randomly. Also we inquired the degree of relation of the technique qualification for graduates from industrial engineering to the current major subjects. For fostering the cultured individuals the community demands, we amended and looked into the current liberal arts course to supplement it. We analyzed the opinions of students, professors and experts from various circles through questionnaires, and then we set up the direction and the priority order for developing the curriculum for training the technician. According to the analyzed results, we presented the curriculum centering around customers and demanders and introduced it in detail. We are going to utilize developed curriculum, teaching methods by computers and practice methods step by step, and make expansion to industrial engineering of other colleges. Then we are planning to apply to the reeducation for graduates and the social education that contains the industrial human resources and the ordinary persons.

• 한국생산제조학회지
• /
• 제21권2호
• /
• pp.305-310
• /
• 2012

Planetary gear box is a power transmitter having very high gear ratio in compact volume. The planetary step-down gear box converts high speed and low torque into low speed and high torque, which is widely used in constructional and industrial machinery field. And, the planetary step-up gear box does vice versa working, which is used as main gear box of large sized wind mill system. The large sized planetary gear box must be performed the normal-opposite rotation test as a its durability test for achieving the reliability. The large sized planetary gear box is composed by triple gear trains of sun gear, carrier, and ring gear. If input power is supplied into one of them and the other is fixed, and then another becomes the output part. In this paper, we designed a new test equipment which can do rapid normal and opposite rotational change with only small displacement by supplying test power using the above rotation (driving) characteristics and hydraulic cylinder and link, and also compared and analyzed with existing method through various experiments.

• 소성∙가공
• /
• 제15권1호
• /
• pp.9-14
• /
• 2006

In the present research, the simultaneous punching of ultra small size hole of $2\~10\;{\mu}m$ in diameter on flat rolled thin metal foils was conducted with elastic polymer punch. Workpiece used in the present investigation were the rolled pure copper of $3{\mu}m$ in thickness and CP titanium of 1.5fm in thickness. The metal foils were punched with the dies and arrays of circular and rectangular holes were made. The process set-up is similar to that of the flexible rubber pad farming or Guerin process. Arrays of holes were punched successfully in one step forming. The punched holes were examined in terms of their dimensions. The effects of the wafer die hole dimension and heat treatment of the workpiece on ultra small size hole formation of the thin foil were discussed. The process condition such as proper die shape, pressure, pressure rate and diameter-thickness ratio (d/t) were also discussed. The results in this paper show that the present method can be successfully applied to the fabrication of ultra small size hole away in a one step operation.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.31-38
• /
• 2015

In this paper, a buck-boost type battery charger is developed for charging battery set with a lower voltage. This battery charger is configured by a rectifier circuit, an integrated boost/buck power converter and a switched capacitors circuit. A boost power converter and a buck power converter sharing a common power electronic switch are integrated to form the integrated boost/buck power converter. By controlling the common power electronic switch, the battery charger performs a hybrid constant-current/constant-voltage charging method and gets a high input power factor. Accordingly, both the power circuit and the control circuit of the developed battery charger are simplified. The switched capacitors circuit is applied to be the output of the boost converter and the input of the buck converter. The switched capacitors circuit can change its voltage according to the utility voltage so as to reduce the step-up voltage gain of the boost converter when the utility voltage is small. Hence, the power efficiency of a buck-boost type battery charger can be improved. Moreover, the step-down voltage gain of the buck power converter is reduced to increase the controllable range of the duty ratio for the common power electronic switch. A prototype is developed and tested to verify the performance of the proposed battery charger.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.193-197
• /
• 2005

This paper presents a method by which multiple holes of ultra small size can be punched simultaneously. Silicon wafers were used to fabricate punching die. Workpiece used in the present investigation were the rolled pure copper of $3{\mu}m$ in thickness and CP titanium of $1.5{\mu}m$ in thickness. The metal foils were punched with the dies and arrays of circular and rectangular holes were made. The diameter of holes ranges from $2-10{\mu}m$. The process set-up is similar to that of the flexible rubber pad forming or Guerin process. Arrays of holes were punched successfully in one step forming. The punched holes were examined in terms of their dimensions, surface qualities, and potential defect. The effects of the die hole dimension on ultra small size hole formation of the thin foil were discussed. The optimum process condition such as proper die shape and diameter-thickness ratio (d/t) were also discussed. The results in this paper show that the present method can be successfully applied to the fabrication of ultra small size hole array in a one step operation.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권1호
• /
• pp.330-338
• /
• 2024

In this paper, a Ka-band high-output active phased array antenna device applicable to small radars and seekers was designed, and the improved performance was studied. The radiation device assembly consists of 1x8 arrangements, and the step flared notch antenna type. It shows low active reflection loss characteristics in broadband, and low loss characteristics by applying the air-strip feeding structure, and is designed to enable beam steering up to 45 degrees. The TRM(transmit receive module) output power is more than 2.0W per channel using GaN HPA in the transmitting path, and satisfies more than 25.0 dB gain and less than 6.0 dB noise figure in the receiving path. Accordingly, the Effective Isotropically Radiated Power(EIRP) of the antenna unit shows the performance of 0.00 dB or more and the receive gain-to-noise temperature ratio(G/T) of 0.00 dB/k or more. For demonstration, we have designed aforementioned planar array antenna which consists of 64 radiating elements having a size within 130 mm x 130 mm x 300 mm and weight of less than 4.9 kg..