• The KSFM Journal of Fluid Machinery
• /
• v.14 no.4
• /
• pp.12-18
• /
• 2011

Volute casings for liquid rocket turbopump are designed and evaluated in a structural point of view. At the design step 3D modeling and finite element analyses are conducted iteratively. During the step various loads such as internal pressure, casing stiffness and mounting forces are considered in the analyses, along with the weight minimization effort. After the design step volute casings are manufactured by metal casting process, and then they are subjected to burst test for structural verification. In the burst test strains at several points are measured and compared with predicted values.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.195-203
• /
• 2015

In this study, the carrier acceleration-ramp-step test was applied to GPS carrier phase measurements, and the results were compared and analyzed. In the carrier acceleration-ramp-step test, the acceleration, ramp, and measurements are estimated using 10 consecutive carrier phase measurements for satellites observed at the same time based on the least square method. As for the characteristic of this test, if failure occurs in the measurement, the value jumps significantly compared to the previous result; but it judges that failure has occurred in all the satellites although failure has occurred in one satellite. Therefore, in this study, a method that eliminates a satellite with failure was suggested, and thresholds of the carrier acceleration, ramp, and step were suggested. The evaluation of the failure detection performance of carrier phase measurement using the suggested thresholds showed that failure could be detected when the carrier phase measurement changed abruptly by more than about 0.1 cycles.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.3
• /
• pp.21-31
• /
• 2020

Purpose : The purpose of this study was to determine the effects of a cognitive-exercise program using step on the cognitive function, gait, and depression of elderly with mild cognitive impairment. Methods : The subjects comprised 30 elderly people with mild cognitive impairment who used elderly welfare centers in the provinces A, B, and C between March 21 and June 7, 2019. They were divided into an experimental group (n=15) and a control group (n=15) before undergoing an experiment based on a pretest-posttest control group design. The lowenstein occupational therapy cognitive assessment-geriatric population was used to assess the subjects' cognitive function, while the 4-stage balance test, 30-second chair-stand test, timed up & go test, and functional reach test were employed to evaluate their gait. In addition, the beck depression inventory was used to measure their levels of depression. Results : The cognitive-exercise program using step enhanced the subjects' cognitive function and gait and reduced their levels of depression. Furthermore, statistically significant differences were found between the experimental group and the control group. Conclusion : The cognitive-exercise program using step promoted the process of sensorimotor and cognition through the learning process of various steps taking left and right steps and cognitive activities. It improves gait by activating the coordination of the musculoskeletal and nervous systems of the body and positively affecting posture control, balance, flexibility, and lower extremity muscles. It also relieved depression by performing successful step learning and cognitive activities with forward-looking (doing) that leads to pleasure and achievement. The present study confirmed the value of a cognitive-exercise program using step to treat multiple domains of functional decline in elderly patients with mild cognitive impairment. This is therefore proposed as an intervention program for this patient group.

• Journal of The Korean Society of Integrative Medicine
• /
• v.5 no.1
• /
• pp.43-53
• /
• 2017

Purpose : To examine the relative absolute reliability and validity of step test (ST) scores in subjects with chronic stroke. Method : A total of 27 stroke patients, participated in the study. A relative reliability index (intraclass correlation coefficient, ICC) was used to examine the level of agreement of inter-rater test-retest reliability for ST score. Absolute reliability indices, including the standard error of measurement(SEM) and the minimal detectable change (MDC), and limits of agreement by Bland and Altman analysis. The validity was demonstrated by spearman correlation of ST score with 10 m Walk Test (10mWT), Fugl-Meyer Assessment-Lower/Extremity (FMA-L/E)-total score, Berg Balance Scale (BBS)-total score. Result : An excellent inter-rater reliability in ST scores was found (paretic, ICC=0.993~0.996; nonparetic, ICC=0.982~0.991). In addition, excellent test-retest reliability was found (paretic, ICC=0.992; nonparetic, ICC=0.967). It all showed acceptable SEM of the ST score as paretic and nonparetic were 0.22 and 0.46 respectively (average score <10 %), and the MDC of the paretic and nonparetic were 0.61 and 1.27 respectively (possible highest score <20 %). indicating that measures had a small and acceptable measurement error. The ST score of paretic and nonparetic were also found to be significantly associated with 10MWT (r=0.77~0.79), FMA-LE scores (r=0.73~0.81) and BBS scores (r=0.72~0.76). Conclusion : The ST showed highly sufficient Inter-rater test-retest agreement and validity and acceptable measurement errors caused by due to chance variation in measurement. It also can be used by clinicians and researchers to assess the balance and mobility performance and monitor functional change in chronic stroke patients.

• Journal of Korean Physical Therapy Science
• /
• v.17 no.1_2
• /
• pp.1-9
• /
• 2010

Background: The objective of this study was to determine whether sensorimotor training using an unstable surface affects dynamic balance and gait function in patients with hemiparesis, and to compare the effect of sensorimotor training with that of cycling exercise. Methods: Two subjects with post-stroke hemiparesis volunteered to participate in this study. Single-subject A-B design with alternating treatment was used for this study. Baseline(A) and intervention(B) phases were performed for 7 and 8 sessions, respectively. Sensorimotor training and cycling exercise were performed for 20 minutes in randomized order. Assessment tools were made by using a step test, timed up and go(TUG) test, and 6-minute walk test(6MWT). Results: Each of the participants improved in all three tests after the two interventions. Participants 1 and 2 showed the improvement for their assessment score after sensorimotor training in the step test by 42.1%(p<.05) and 58%, in the TUG, 31% and 19.5%, and in the 6MWT test, 32.3% and 10.6%(p<.05), respectively. After cycling exercise, participants 1 and 2 also improved in the step test by 32.5% and 53.1%, in the TUG, 27.4% and 18%, and in the 6MWT test, 28.8% and 3%. In statistical analysis between the two interventions, sensorimotor training showed a significant increased values in the step test for participant 1 and the 6MWT for participant 2 as compared with those of cycling exercise. Conclusion: Sensorimotor training and cycling exercise are helpful for improving dynamic balance and gait capacity. Furthermore, sensorimotor training may be more helpful than cycling exercise.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1732-1735
• /
• 2003

In this paper, a DSP-based test apparatus for Control Rod Drive Mechanism (CRDM) that is used in nuclear power plants is described. Using this apparatus, we can test the mechanical and electrical characteristics of CRDM and obtain some information about how to improve the CRDM further and how to design a power controller to actuate the CRDM. Since firing angles can be directly applied to the gate-drive circuits of thyristors in the power controller by using this apparatus, the maximum and minimum values of firing angles within available limits are easily measured. Also step-current inputs help us investigate each coil's response characteristics. Therefore, we can easily find the range of control gains which enables a stable CRDM operation in insertion and withdrawal actions at high speed, mid speed, and low speed. Since this apparatus has a test mode in which an insertion or withdrawal action is divided into several phases so that the current command for each phase is given step by step, we may judge whether the CRDM works as expected or not. We also describe a fault detection capability of the test apparatus for the power controller by using discrete Fourier transform.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.884-890
• /
• 2009

The bi-directional pile load test with variable end plate overcomes the shortcoming of the Osterberg cell test. It is possible that the ultimate bearing capacity of the bi-direction can be known by using the loading of the end plate and two step procedures. The first step is to confirming end bearing capacity with variable end plate and the second step is similar to the conventional O-cell test. In the study, To calculate ultimate capacity of bi-directional load test using model with the pile with variable end plate O-cell, operated with end plate of 3 type on sand layer according to the relative density, loose, medium and dense conditions.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.6
• /
• pp.284-292
• /
• 2005

Because all of the short-circuit testing laboratories have the limitation of test facilities, the synthetic making test methods have been used to estimate the short-circuit making performance of the ultra high-voltage circuit breaker as the alternative to direct test methods. So, KERI(Korea Eelctrotechnology Research institute) has completed the construction of the synthetic making test facilities using the low capacity step-up transformer method which fulfill the requirements specified in newly revised IEC 62271-100 Edition 1.1(2003) and have the testing capability up to 550kV, 63kA full-pole circuit breaker. The test facilities using the low capacity step-up transformer method presented in this paper are made up of the unit equipments such as HCS(High-speed Closing Switch), ITMC(Initial Transient Making Current) circuit and UP TR(low capacity step-up transformer) and have the operating range of 17.6$^{\circ}$ $\~$ 145.1$^{\circ}$ for testing the circuit breaker rated on up to 50kA and 43.1$^{\circ}$ $\~$ 119.6$^{\circ}$ for more than 50kA.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.40 no.5
• /
• pp.921-935
• /
• 2016

This research analyzed the manual performance of firefighting protective gloves on global markets in order to suggest an evaluation method for firefighting protective gloves wearing comfort. We collected 13 types of firefighting gloves from domestic and international markets (7 types from Korea, 3 types form Europe, 2 types from the U.S and 1 type from Japan). We set the Don-Doff test as a basal requirement for moving toward to further manual performance tests that consist of: ASTM dexterity test, Minnesota dexterity test, Bennett hand tool test and ASTM torque test. All gloves were evaluated in dry and wet conditions, we included eight current male firefighters ($43.4{\pm}7.0yr$ in age, $173.1{\pm}4.4cm$ in height, $79.9{\pm}9.2kg$ in body mass) for the tests. Four gloves (1 Korea, 1 U.S, 1 Germany, and 1 Japan) out of thirteen firefighting gloves passed the Don-Doff test and had great subject preferences. There was no significant difference between dry and wet conditions on the ASTM dexterity test, Minnesota dexterity test, Bennett hand tool test and ASTM torque test. However, Japanese gloves had the greatest score and showed 3-4 times faster completion time on the ASTM dexterity test (p<.05), 1.2-1.5 times faster on the Minnesota dexterity test (p<.05), as fast as the bare hand on Bennett hand tool test (p<.05), and greater performance on the ASTM torque test compared to bare hand. In conclusion, Don-Doff test in wet conditions should be the first step for a mobility evaluation of domestic firefighting protective gloves; subsequently, a comprehensive test assorting ASTM, Minnesota, and Bennett test should be developed as a second step. The current ASTM torque test can be adopted as a third step. This three-step-method for evaluating firefighting protective glove mobility can be expected to expand into surveys of other safety gloves in Korea.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.2
• /
• pp.74-81
• /
• 2010

Ship STEP is the international standard for the exchange of ship modeling data between heterogeneous systems. It is expected that STEP AP218 can be used for seamless data exchange between various CAD/CAM/CAE systems used in the shipbuilding design process. Although the conformance assessment for standards would maximize the performance and confidence about data exchanges, most research has been directed toward interoperability testing. ISO SC4/TC184 only provides the method for conformance testing, and it can be used with test cases on application protocols. Even though standards have been defined for conformance assessment and testing, there is no organization or association. CAD vendors have focused on interoperability testing for evaluation of the performance of their systems. In this paper, the conformance testing criteria for AP218 have been developed with abstract test cases of ship structures. The requested STEP translator was also reviewed with a developed item pool of testing criteria. The criteria methodology would be a guideline for the development of translators and interfaces. The item pool method of testing criteria for conformance assessment would increase performance and efficiency of data translators for Ship STEP and other standards.