• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.38-45
• /
• 2009

Recently, LCD Backlight Unit is being replaced from cold cathode fluorescent lamp(CCFL) to external electrode fluorescent lamp(EEFL) because the EEFL has high energy efficiency and long life. Also, it can reduce energy consumption and weight. So far, external electrode ring for EEFL is produced by sheet metal press forming process. Therefore it had low precision and much material loss. To solve these problems, Multi-Forming process that has five step forming process was invented. However, low productivity is another barrier. Product speed that is controlled by the rotational speed cannot be increased due to the unsatisfied design specification. The reason is that the gap between rolled two edge parts of the sheet plate is tightly inspected. Regarding this factor, the understanding of forming behavior to each process is inevitable. This paper describes the CAE analysis of the multi-forming process by PAM-STAMP.

• 한국컴퓨터정보학회논문지
• /
• 제23권10호
• /
• pp.95-101
• /
• 2018

In this paper, we propose an image-based synthesis method that can effectively represent the spark effect in fire simulation. We use the real flame image or animated image as inputs and perform the following steps : 1) extract feature vectors from the image, 2) calculate artificial buoyancy, and 3) generate and advect spark textures. We detect the edge from images and then calculate the feature vectors to calculate the buoyancy. In the next step, we compute the high-quality buoyancy vector field by integrating the two-dimensional feature vector and the fluid equation. Finally, the spark texture is advect by buoyancy field. As a result, our method is performed much faster than the previous approach and high-quality results can be obtained easily and stably.

• Earthquakes and Structures
• /
• 제2권2호
• /
• pp.127-147
• /
• 2011

In a companion paper as well as in earlier publications, it has been shown that in asymmetric frame buildings, designed in accordance with modern codes and subjected to strong earthquake excitations, the ductility demands at the so called "flexible" edges are consistently and substantially higher than the ductility demands at the "stiff" edges of the building. In some cases the differences in the computed ductility factors between elements at the two opposite building edges exceeded 100%. Similar findings have also been reported for code designed reinforced concrete buildings. This is an undesirable behavior as it indicates no good use of material and the possibility for overload of the "flexible" edge members with a consequent potential for premature failure. In the present paper, a design modification will be introduced that can alleviate the problem and lead to a more uniform distribution of ductility demands in the elements of all building edges. The presented results are based on the steel frames detailed in the companion paper. This investigation is another step towards more rational design of non-symmetric steel buildings.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.245-248
• /
• 2006

The objective of this study is to take the first step in creating a user-friendly health monitoring system for recycled aggregate concrete structure using acoustic emission(AE). Each specimen was a cube, the edge of which was 150mm. For pull-out tests, a steel rebar, 13mm in diameter, was embedded in the center of each specimen and casting directions(i.e., vertical and horizontal) were considered in this paper. The AE parameters were analyzed for damage levels(i.e. internal cracking stage, pull-out stage) of all specimens. Results from this study show that event, duration versus amplitude of a signal, showed a clear difference for different loading stages depending upon the concrete casting directions.

• 한국실내디자인학회논문집
• /
• 제37호
• /
• pp.103-109
• /
• 2003

The purpose of this study is to present the advanced plans to get the activation of the domestic furniture manufacture, considering the conditions of the furniture market and business environments before and after IMF Economic Crisis. These are necessary to get over some problems which result in reduction of demand, consumption, and investment under the recession. The furniture manufacture should take the occasion as a pertinent opportunity to strengthen the competitive edge and step up the exploration of the international markets. It is reasonable to conclude that the advanced plans should be designed, implemented, and expanded through the inducement of the government, manufacturers, and foreign investors.

• Tribology and Lubricants
• /
• 제16권3호
• /
• pp.201-207
• /
• 2000

The numerical procedure to analyze a non-steady 3-dimensional elastohydrodynamic lubrication on the cyclically loaded contact has been newly developed. The procedure was applied on the cam-roller contact of the valve mechanism for the marine diesel engine. Both the pressure distribution and the film thickness between the cam and roller follower were calculated for each time step of the whole cycle. The pressure spike is shown at the outlet of the roller edge and it is getting higher as the external load is increased. The film thicknesses in the result of the non-steady analysis have a tendency to increase compared to those in the result of the analysis with the assumption of steady state. Therefore, the surface roughness of the non-steady contact need not be limited below that of the steady contact of the equivalent operating conditions.

• 반도체디스플레이기술학회지
• /
• 제19권4호
• /
• pp.18-21
• /
• 2020

Undetected wafer slip during the lift pin-down motion in semiconductor equipment may affect the center to edge variation, wafer warpage, and pattern misalignment in plasma equipment. Direct measuring of the amount of wafer slip inside the plasma process chamber is not feasible because of the hardware space limitation inside the plasma chamber. In this paper, we demonstrated a practice for the wafer lift pin-up and down motions with respect to the gear ratio, operating voltage, and pulse width modulation to maintain accurate wafer position using remote control linear servo motor with an experimentally designed chamber mockup. We noticed that the pin moving velocity and gear ratio are the most influencing parameters to be control, and the step-wised position control algorithm showed the most suitable for the reduction of wafer slip.

• 대한설비공학회지:설비저널
• /
• 제14권2호
• /
• pp.138-149
• /
• 1985

The heat diffusion equation for an annular fin is analyzed using Laplace transformations. The fin has a uniform thickness with its edge heat loss and two temperature profiles at the base such as a step change in temperature or heat flux. To obtain the exact solutions for temperature distribution, this paper can detect the eigenvalues which satisfy the roots of transcendental equations in above two cases during inverse Laplace transformations. The exact solutions for temperature and heat flux are obtained with the infinite Series by dimensionless factors. The solutions are developed for small and large values of times. These series solutions converge rapidly for large values of time, but slowly for small.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.701-705
• /
• 2002

본 논문에서는 6TALK (IPv6 TrAansLator of Krv6) 프로젝트의 구현에 대한 내용과, 이를 이용하여 IPv6 망이 기존의 IPv4망이나, 다른 IPv6망과 자연스럽게 연동할 수 있는 시나리오에 관해 기술한다. 이미 잘 알려진 바와 같이 현재의 IPv4 인터넷은 인터넷 사용자의 폭발적인 급증과 더불어 한계를 맞이하고 있다. 이를 극복하기 위해 제안된 IPv6는 현재 여러 기술적인 표준화와 실험 망에서의 테스트 과정을 마무리 짓고 있는 단계이다. 앞으로의 IPv6의 보급에 있어 가장 중요한 과정은 기존에 널리 존재하고 있는 IPv4망과 자연스럽게 공존하며 그 적용 범위를 넓혀갈 수 있도록 하는 전이 기술을 개발, 보급하는 일이다 이를 위해서 IETF에서는 NGTrans라는 WG을 별도로 만들어 IPv6로의 전환에 관련된 기술들을 표준화하고 있다. 현재 전 세계적으로 다양한 IPv6 관련 전환기술 프로젝트들이 진행되고 있으며, 본 논문에서 소개하는 6TALK 프로젝트도 NGTrans WG에서 소개하는 기술들을 바탕으로 망의 구성에 따라 IPv4망과 IPv6망이 자연스럽게 공존할 수 있도록 하는 솔루션들을 제공하는 것을 최종 목표로 하는 프로젝트이다. NGTrans WG에서 제안한 전환기술은 듀얼스택, 터널링, 변환기 등과 같은 기본 기술들과, 이 기본 기술을 확장 응용한 기술들로 이루어져 있다. 6TALK는 이러한 전환기술들을 복합적으로 사용하며, 네트워크의 가장자리(edge)에 존재하는 IPv6망이 기존 IPv4망이나, IPv4 망을 사이에 두고 존재하는 IPv6망과 연동할 수 있도록 하는 기능을 제공한다. 6TALK은 전이기술로 NAT-PT/SIIT와 몇몇 응용레벨 프로토콜에 대한 ALG, 구현환경으로는 커널 2.4.18버전이 탑재된 리눅스를 이용하고 있다.d it apply a electronic cash system. In particularly a proposed electronic cash system have an anonymity control ability which trace a user who make use a electronic cash illegally in association with a trusted center.estigation and explain how our tool can be further enhanced.door playground facilities. On the basis of the site investigation the interview and the indoor education program for physically challenged children the author completed an outside play program. Each item in this program was classified as belonging to either a "sense play" program or and "exercise play" program. Finally, the author designed suitable play equipment for physically challenged children corresponding to each item in the exercise programs in order to research the appropriateness of the equipment to its intended use. This research is the first step. From this point the author expects that sp

• 전자공학회논문지SC
• /
• 제49권4호
• /
• pp.17-22
• /
• 2012

컨벌루션 기법은 디지털 영상처리 분야에서 블러링(blurring), 샤프닝(sharpening), 에지 검출(edge detection), 잡음 제거(noise reduction)등 다양한 목적을 위해 사용되고 있으며, 상황에 따라 다양한 필터 마스크 값을 가지고 적용된다. 본 논문은 영상처리에서 다양하게 응용되는 컨벌루션 영상처리 기법을 2차원 Look-Up Table(LUT)와 필터의 중첩영역 버퍼링 기법을 통하여, 이의 영상처리 속도를 고속화하는 방법을 제안한다. 첫째, 사전에 필터의 마스크 값과 영상 화소 값의 곱셈 연산 결과값을 2차원 LUT에 저장하여, 연산에 대한 결과를 참고 하였다. 둘째, 대부분의 컨벌루션 필터가 가지는 필터 대칭성 특징에 의해 연산이 중복 수행되는 부분을 효율적으로 연산하기 위해, 중첩영역 처리 결과를 버퍼 공간에 임시 저장하고, 다음 연산에서 사용할 때 버퍼의 값을 가져오는 방식으로 중첩 영역의 불필요한 반복 연산을 최소화한다. 제안하는 알고리즘은 실시간 처리를 필요로 하는 PC환경과 제한된 컴퓨팅 자원을 가지는 임베디드 시스템 환경에서 연산량을 최소화함으로써 기존 컨벌루션 알고리즘 보다 고속화된 성능 결과를 확인할 수 있었다.