• 대한기계학회논문집B
• /
• 제26권3호
• /
• pp.423-431
• /
• 2002

An experimental study is conducted to investigate the effect of two-frequency forcing on turbulent flow behind a backward-facing step at the Reynolds number of 27000 based on the step height. The forcing is provided from a thin slit located at the edge of the backward-facing step to increase mixing behind the backward-facing step and consequently to reduce the reattachment length. With single frequency forcing, the minimum reattachment length is obtained at the non-dimensional forcing frequency (F) of St$\_$h/ = 0.29. With two-frequency forcing, a subharmonic frequency (F/2) or biharmonic frequency (2F) is combined with the fundamental frequency (F), i.e. (F, F/2) or (F, 2F) forcing is applied. In the case of (F, F/2) forcing, the reattachment length is not much sensitive to the phase difference between F and F/2. However, the reattachment length significantly depends on the phase difference between F and 2F in the case of (F, 2F) forcing. At a certain range of the phase difference, the reattachment length becomes smaller than that of the single frequency forcing.

• 대한기계학회논문집A
• /
• 제28권12호
• /
• pp.1906-1913
• /
• 2004

A new method has been proposed for the calibration of frictional forces in atomic force microscopy. Angle conversion factor is defined using the relationship between torsional angle and frictional signal. Once the factor is obtained from a cantilever, it can be applied to other cantilevers without additional experiments. Moment balance equations on the flat surface and top edge of a commercial step grating are used to obtain angle conversion factor. Proposed method is verified through another step grating test and frictional behavior of Mica.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.297-300
• /
• 2002

In this paper, we propose a post-processing method to reduce the blocking artifacts. We perform the post-processing only in the spatial domain so that it is readily applicable to real-time video decoder. Many approaches proposed so far for deblocking deal with only The luminance signal. but here we propose processing the chrominance signals as well since the low bit rare application where the blocking artifacts are most problematic suffers significantly from the color misalignment caused by blocking artifacts occurring to chrominance data as well. The proposed method is composed of low pass filtering in two steps considering the edge direction. The first step is the IIR low pass filtering in the diagonal direction, and the second step is another IIR low pass filtering in horizontal and vertical directions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.846-851
• /
• 2004

A new method has been proposed for the calibration of frictional forces in atomic force microscopy. Angle conversion factor is defined using the relationship between torsional angle and frictional signal. Once the factor is obtained from a cantilever, it can be applied to other cantilevers without additional experiments. Moment balance equations on the flat surface and top edge of a commercial step grating are used to obtain angle conversion factor. Proposed method is verified through another step grating test and frictional behavior of Mica.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.126-132
• /
• 2000

This paper presents a facial expression recognition based on Gabor wavelets that uses a fuzzy C-means(FCM) clustering algorithm and neural network. Features of facial expressions are extracted to two steps. In the first step, Gabor wavelet representation can provide edges extraction of major face components using the average value of the image's 2-D Gabor wavelet coefficient histogram. In the next step, we extract sparse features of facial expressions from the extracted edge information using FCM clustering algorithm. The result of facial expression recognition is compared with dimensional values of internal stated derived from semantic ratings of words related to emotion. The dimensional model can recognize not only six facial expressions related to Ekman's basic emotions, but also expressions of various internal states.

• 대한수학회보
• /
• 제45권2호
• /
• pp.385-396
• /
• 2008

For a positive integer m and a digraph D, the m-step competition graph $C^m$ (D) of D has he same set of vertices as D and an edge between vertices u and v if and only if there is a vertex x in D such that there are directed walks of length m from u to x and from v to x. Cho and Kim [6] introduced notions of competition index and competition period of D for a strongly connected digraph D. In this paper, we extend these notions to a general digraph D. In addition, we study competition indices of tournaments.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.143-149
• /
• 2016

In this study, a series of numerical simulation of dam break flow was conducted using EFDC model, and input conditions including cell size, time step, and turbulent eddy viscosity were considered to analyze parameter sensitivity. In case of coarse mesh layout, the propagated length of the shock wave front was ${\Delta}_x$ longer than that of other mesh layouts, and the velocity results showed jagged edge, which can be cured by applying fine grid mesh. Turbulent eddy viscosity influenced magnitude of the maximum velocity passing through gate up to 20% and the cell Peclet number less than 2.0 ensured no numerical oscillations.

• 대한의용생체공학회:의공학회지
• /
• 제11권1호
• /
• pp.31-38
• /
• 1990

Image correction of the fluorescein angiogram with the low contrast and geometrically distorted is studied. The procedure is divided into two steps : A template matching step and a geometrical transformation step. Based on the sequential similiarity detection algorithm, more Improved matching results are obtained with edge enhanced image. For the reference points and the corresponding matchimg points, the geometrical transformationss by the use of the average value of the X, Y translational shifts and a pair of these points, respectively are described. Then the corrected images are obtained using bilinear interpolation. It is proven that the usefullness of this study for the image correction of the ocular fundus fluoresceln angiogram with low contrast and geometrically distorted mainly due to the eye movements.

• 한국진공학회지
• /
• 제9권4호
• /
• pp.419-427
• /
• 2000

본 연구는 원자의 주변 환경에 따른 각각의 확산 속도를 구할 수 있는 기구를 제시하였다. STM 또는 HRLEED 등의 실험과 kinetic Monte Carlo(KMC) 시뮬레이션 계산과의 비교를 통하여 테라스 위 흡착 원자의 확산장벽, step 끝 부착 원자의 탈착 확산 장벽, 잘 알려진 Schwoebel 장벽을 포함한 각각의 확산 장벽을 구할 수 있었다. 팔-넓이, 군집 밀도, 거칠기 등이 시뮬레이션 계산과 실험 결과를 비교하는 데에 가장 적절한 원자단위의 구조변수들임을 확인하였고, 특히 아직 잘 사용되지 않은 구조 계수인 가지폭이 확산 장벽을 구별하여 구하는 데에 중요한 역할을 하는 것을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3685-3700
• /
• 2015

To avoid influences caused by pose, illumination and facial expression variations, we propose a robust three-step algorithm based on ASM and POEM for facial landmark localization. Firstly, Model Selection Factor is utilized to achieve a pose-free initialized shape. Then, we use the global shape model of ASM to describe the whole face and the texture model POEM to adjust the position of each landmark. Thirdly, a second localization is presented to discriminatively refine the subtle shape variation for some organs and contours. Experiments are conducted in four main face datasets, and the results demonstrate that the proposed method accurately localizes facial landmarks and outperforms other state-of-the-art methods.