• Journal of Biosystems Engineering
• /
• 제24권1호
• /
• pp.67-74
• /
• 1999

A prototype cut-flower sorter was developed and tested for its performance with five varieties of roses. Support plates driven by a chain mechanism transported the roses into an image inspection chamber. Color image processing algorithms were developed to evaluate the length, thickness, and straightness of stem and color, height, and maturity of bud. The average absolute errors of the system for the measurements of stem length, stem thickness, and height of bud were 19.7 mm, 0.5 mm, and 3.8 mm, respectively. The results of classification by the sorter were compared with those of a human inspector for straightness of stem and maturity of bud. The classification error for the straightness of stem was 8.6%, when both direct image and reflected image by a mirror were analyzed. The accuracy in classifying the maturity of bud varied among the varieties, the smallest for‘Nobless’(1.5%) and the largest for‘Rote Rose’(13.5%). The time required to process a rose averaged 2.06 seconds, equivalent to the capacity of 1,600 roses per hour.

• 한국작물학회지
• /
• 제45권4호
• /
• pp.245-250
• /
• 2000

This study was conducted to analyze the responses of some agronomic traits to the different cultural environments and relations among the agronomic traits for selecting sesame varieties with higher cultural stabilities. The indexes for stability parameters measured were coefficient of variability, heritabilities, genetic correlations and path coefficients of agronomic traits according to locations and years in Korea. The heritabilities of agronomic traits showed different by locations and years. Number of seeds per capsule and 1000 seeds weight showed higher heritabilities, but stem length and seed weight per plant showed relatively lower heritabilities. Average heritabilities of some agronomic traits in 1998 were comparatively higher than those of 1999. Of six areas, Jinju area showed biggest coefficient of yield variability in 1998-1999. Iksan and Taegu areas showed higher heritabilities in 1998, but Iksan and Jinju areas showed lower heritabilities in 1999. Genetic correlations were slightly higher than corresponding phenotypic correlations. Stem length showed positive genetic correlation with the number of capsules per plant, and seed weight per plant and the number of capsule per plant showed positive genetic correlation with seed weight per plant. On the analysis of path coefficients, stem length and number of capsules effected highly on grain yield. Great regional variations were observed on the effects of agronomic traits on grain yield. Higher direct effects of stem length on grain yield were observed at Suwon, Chungwon, Taegu, Jinju and Naju areas, but in Iksan area was observed higher direct effect of the number of capsules per plant on grain yield in 1998. In 1999, higher direct effect of stem length on grain yield was observed at Chungwon and Suwon areas. Iksan and Taegu areas were also observed higher direct effect of the number of capsule per plant on grain yield.

• Journal of Ginseng Research
• /
• 제4권2호
• /
• pp.194-196
• /
• 1980

Five years old ginseng plant (Panax ginseng) with ten stems from six bud base was found in a ginseng plantation. Stems were emerged even around the rhizome base. Growth status of all stems were poor. The length of some stems was shorter than that of petiole. The shorter the stem length is the longer the petiol length.

• Journal of Forest and Environmental Science
• /
• 제38권4호
• /
• pp.229-238
• /
• 2022

Q. mongolica and Q. dentata are representative species of deciduous forest communities in Korea and are known to be relatively resistant to soil drying condition among Korean oaks. This study attempted to elucidate the degree of competition and ecological niche characteristics of the two species by comparing the ecological responses of the two species according to soil moisture. Competition between Q. mongolica and Q. dentata was shown to be more intense under the conditions where moisture content was low than under the conditions where moisture content was high. As for the ecological niche overlaps of the two species for soil moisture, the structural traits of plant such as stem diameter overlapped the most, the traits of biomass such as petiole weight overlapped the least, and photosynthetic organ-related traits such as leaf width and length overlapped intermediately. When looking at the competition for soil moisture between the two species, it can be seen that Q. mongolica won in nine traits (leaf width length, leaf lamina length, leaf lamina weight, leaf petiole weight, leaf area, leaves weight, shoot weight, root weight, and plant weight) and Q. dentata won in the remaining seven traits (leaf petiole length, leaves number, stem length, stem diameter, stem weight, shoot length, and root length). Competition between the two species for the moisture environment of the soil was shown to be intense under the conditions where moisture content was low. The degree of competition between Q. dentata and Q. mongolica for soil moisture is high under the conditions where soil moisture content is low, and it is judged that Q. mongolica is more competitive for soil moisture than Q. dentata.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.358-358
• /
• 2017

The plant type is generally one of the most important factor for crop production and be influenced by nitrogen absorption. Soybean plants have nodules in their roots, supplying nitrogen at the vegetative and reproductive stages. Root nodules seem to effect plant type of soybean plants, but there are few reports on the relation nodules and plant type. We tried to clarify the effects of root nodules on the plant type, especially internode length and petiole length, comparing non-nodule soybean with normal soybean. The pot experiment and field experiment were carried out at Mie University and Utsunomiya University in 2015 and 2016. Enrei, a popular cultivar in central Japan, and En1282, non-nodulating isogenic line of Enrei, were used. The petiole length on main stem was measured after defoliation and internode length and yield components were measured after harvest. In the field experiment, the patterns of the final length in internode and petiole on main stem were consistent in both cultivars, and a positive correlation was found between the Nth petiole length and the N-1th internode length, belong to the same phytomere. Therefore, the petiole and internode on the main stem make similar response for environmental factors. In pot experiment, Enrei grew with the same pattern as field experiments, but in En1282, the elongation of petiole and internode in the upper part was suppressed, especially the petiole was suppressed greatly. The main stem becomes the basis of the plant type. These results were considered that the nitrogen is distributed preferentially to the internode than the petiole. It seems that the pot cultivation restricted the rhizosphere and caused nitrogen deficiency in En1282. These results suggested that the slight nitrogen deficiency provided from the root nodules was compensated by the increase of the amount of inorganic nitrogen absorption due to the expansion of the rhizosphere, and the severe nitrogen deficiency suppressed elongation of petiole and internode. It is clear that root nodules effect the plant type by supplying nitrogen to internodes and petioles.

• 농업생명과학연구
• /
• 제44권3호
• /
• pp.23-30
• /
• 2010

본 실험은 Dendrobium nobile 계통의 교잡종인 'Hamana Lake Dream' ${\times}$ 'No. 55' 유묘의 기내삽목 시 증식 및 생육에 알맞은 배지와 배양조건을 구명하고자 실시하였다. Hyponex배지보다 MS배지에서 생장이 잘되었는데 MS배지에 활성탄을 0.1과 1.0g/L 수준에서 첨가했을 때 줄기수와 엽장, 근수, 생체중이 양호 하였으나 2.0g/L이상에서는 감소하였으나 통계적 유의성은 없었다. MS배지에 agar, sucrose, peptone, gelite 를 농도별로 첨가한 실험에서는 agar 5g/L 첨가 시 줄기 길이와 엽폭, 생체중의 값이 높았고, 절간장과 근수는 sucrose 40g/L을 첨가했을 때 효과적이었다. 또한 줄기수와 엽수는 peptone 1g/L에서 효과적이었으나 gelite는 모든 농도에서 대조구에 비해 저조하였다. 기내삽목 시 배양온도는 $28^{\circ}C$가 알맞았고 동일한 온도조건에서는 MS배지가 Hyponex배지보다 더 효과적이었다. 또한 sucrose 농도별 실험에서는 $28^{\circ}C$에서 40 g/L를 첨가하는 것이 좋았다.

• 대한디지털의료영상학회논문지
• /
• 제12권1호
• /
• pp.51-58
• /
• 2010

Ionization chambers often exhibit a stem effect, caused by interactions of radiation with air near the chamber end, or with dielectric in the chamber stem or cable. In this study measured stem effect correction factor for length of ionization chamber from medical linear accelerator recommend to with the use of stem correction method. For a model of the Farmer-type chamber, were used to calculate the beam quality correction factor. These interactions contribute to the apparent measured exposure. Additionally, it needs to consider ionization chamber use of small volume and stem effect of cable by a large field. Linear accelerator generated photons energy and increased dose repeatedly measured by using stem correction method. Stem effect was dependence of the energy and increases with photon energy conditions improved of beam quality. In conclusion, stem effect correction factor was measured within 0.4% calculated according to the exposures stem length and also supposed to determined below 1% of another stem correction method.

• 한국작물학회지
• /
• 제39권3호
• /
• pp.232-236
• /
• 1994

보리 4품종, 밀 4품종, 호밀 3품종, 옥수수 1품종을 가지고 파종 심도를 달리 하였을 때 이들 작물들의 초엽장과 식물체장을 조사하였고 또 이들 간의 상관을 조사한 결과를 요약하면 다음과 같다. 1. 보리, 밀, 호밀, 옥수수가 발아할 때 생기는 관 아래의 절간을 중경 또는 지하경 이라고 호칭하고 있는데 지하경으로 부르는 것이 옳을 것 같으며 보리, 밀, 호밀은 초엽이 종자로부터 지하경과 함께 나오고 옥수수는 지하경 정단의 관에서 나오는 것을 확실하게 해두는 것이 좋을 것 같다. 2. 보리의 초엽의 길이는 파종 심도가 깊어질수록 현저하게 길어지고 식물체장도 같은 경향이 있는데 보리의 2cm파종은 6cm, 10cm깊이 파종 보다 현저하게 짧게 나타났다. 품종간에는 차이를 볼 수 없었다. 3. 밀의 초엽 길이도 마찬가지로 파종 심도에 따라 현저하게 길어졌으며 2cm 파종은 6cm, 10cm 파종보다 현저하게 짧게 나타났으나 보리보다는 못하였다. 이것도 품종간 차이는 별로 나타나지 않았다. 4. 호밀과 옥수수도 파종 심도가 깊어질수록 초엽이 길어졌으며 그 변이가 보리와 밀보다 크게 나타났다. 호밀과 옥수수에서 변이가 컸다. 5. 각 작물과 품종들에 있어서 초엽과 식물체장 간에 유의성이 있는 상관을 보였고 칠보 호밀은 고도의 유의성을 나타내었다.

• 한국정밀공학회지
• /
• 제23권11호
• /
• pp.126-134
• /
• 2006

In this study, the effect of stem-end design on contact pressure and stress distribution in revision TKR was investigated using finite element method. The finite element model of tibia, including the cortical bone, the cancellous bone and canal, was developed based on CT images. The implant models with various stem lengths, diameters, friction coefficients, and press-fit effects were considered. The results showed that the longer stem length, the stronger press-fit, the bigger stem diameter, and the higher friction coefficient increased both peak contact pressure and Von-Mises stress distributions. The results supported the clinical hypothesis that peak contact pressure and stress are related to the stem end pain. The results of this study will be useful to design the stem and reduce the end-of-stem pain in revision TKR.

• 생명과학회지
• /
• 제15권1호
• /
• pp.132-135
• /
• 2005

가지 육종을 위한 기초 자료를 얻고자 9품종을 교잡하여 $F_l$ 세대의 11개 조합을 재료로 각 형질들의 측정치로서 우성의 정도와 잡종강세를 평가하였다. $F_l$세대의 잡종강세는 초장, 경경, 과중, 엽장, 엽폭, 주당과수 등이 초우성으로 유전되었다. 그리고 과장과 과경은 불완전 우성으로 유전되었다. Heterosis의 정도는 초장, 경경, 과중, 과장, 과경, 엽장, 엽폭, 주당과수 등 8개 형질 모두에서 정(+)의 강세를 보였다. Heterobeltiosis의 정도는 초장만이 정(+)의 강세를 보였고, 과경, 엽폭, 엽장, 과중, 주당과수, 과장, 경경은 부(-)의 잡종강세를 보였다