• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.217-220
• /
• 1995

본 논문에서는 최적화기법을 이용하여 모드매개변수를 추정하는 방법을 개발하였다. 최적화기법중 steepest descent method와 Fletcher-Powell method를 1자유도계의 시뮬레이션 데이터에 사용하여 Fletcher-Powell method가 초기값이나 계의 감쇠비에 관계없이 항상 정확한 모드매개변수를 추정함을 밝혀 내었다. 2자유도계의 시뮬레이션 데이터에 적용하였을 때도 본 방법은 정확한 모드매개변수를 추정하였다. 본 방법은 기존의 모드해석방법처럼 실제모드수보다 많은 모드수를 가정할 필요가 없고, 밀집한 모드를 분리하는 능력도 우수하였다. 본 방법을 실험 데이터에 적용하였을 때에도 만족할만한 결과를 나타내었다.

• The Korean Journal of Food And Nutrition
• /
• v.1 no.2
• /
• pp.31-36
• /
• 1988

An adaptive on-line optimization method has been applied to test the ability to maximize the cellular productivity of a continuous methylotroph culture system which was simulated by a variable yield Monod-type model. Optimum dilution rate and productivity were successively obtained and maintained at all times by the algorithm that utilizes steepest descent technique as optimization method and recursive least-square method with forgetting factor as dynamic model identification.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.363-366
• /
• 1998

High frequency scattered fields by a double impedence wedge are computed. In the procedure of the computation, arbitrary impedence faces and wedge angles are considered. The diffraction coefficients for the single, double and triple diffraction mechanism are founded. The second-order and third-order diffracted fields are approximated via the extended spectral ray method and the modified Pauli-Clemmow method of the steepest descent. The maliuzhinets function which is very difficult to obtain accurate value is approximated by the Volakis's asymtotic expression. Numerical computations are performed for the various wedge angles and surface impedence values.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.6
• /
• pp.1020-1026
• /
• 1994

This paper presents a technique to optimize the shape of waveguide components in H-plane. The technique utilizes the numerical optimization process which employs the vector finite element method. In the optimization process, the sensitivity of an objective function with respect to design variables is computed by introducting adjoint variables, which makes the computation easy. The steepest descent method is then employed to update design variables. As a numerical example, an H-plane waveguide teejunction was considered to obtain optimized shape. Comparison between the initial and optimized shape was made.

• Geophysics and Geophysical Exploration
• /
• v.9 no.3
• /
• pp.241-249
• /
• 2006

Due to the long tectonic history and the very complex geologic formations in Korea, the anisotropic characteristics of subsurface material may often change very greatly and locally. The algorithms commonly used, however, may not give sufficiently precise computational results of traveltime data particularly for the complex and strong anisotropic model, since they are based on the two-dimensional (2D) earth and/or weak anisotropy assumptions. This study is intended to develope a three-dimensional (3D) modeling algorithm to precisely calculate the first arrival time in the complex anisotropic media. Considering the complex geology of Korea, we assume 3D TTI (tilted transversely isotropy) medium having the arbitrary symmetry axis. The algorithm includes the 2D non-linear interpolation scheme to calculate the traveltimes inside the grid and the 3D traveltime mapping to fill the 3D model with first arrival times. The weak anisotropy assumption, moreover, can be overcome through devising a numerical approach of the steepest descent method in the calculation of minimum traveltime, instead of using approximate solution. The performance of the algorithm developed in this study is demonstrated by the comparison of the analytic and numerical solutions for the homogeneous anisotropic earth as well as through the numerical experiment for the two layer model whose anisotropic properties are greatly different each other. We expect that the developed modeling algorithm can be used in the development of processing and inversion schemes of seismic data acquired in strongly anisotropic environment, such as migration, velocity analysis, cross-well tomography and so on.

• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.362-365
• /
• 1997

This paper presents a new optical phase stabilization technique for interferometric such as Mach-Zehnder interferometers or Homodyne detectors. The proposed technique can lock such interferometric systems in their maximum/minimum optical outputs without using a dither signal. The phase control scheme is a modified steepest decent algorithm, and is analyzed in terms of a delta modulation approach. It is also applicable to low-repetition rate pulsed interferometric systems in which conventionally used dithering method is difficult to be applied.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1E
• /
• pp.84-88
• /
• 1996

In this paper, we propose a novel adaptive digital filter for tonal noise cancellation, with a frequency tracking capability. The proposed algorithm not only estimates the magnitude and phase of the tonal disturbance but also tracks its frequency, which changes in quasi-static manner. The algorithm uses the steepest descent method and the instantaneous frequency approach for the phase/magnitude estimation and frequency tracking, respectively. A number of computer simulations have been carried out in order to demonstrate the feasibility of the proposed ANC algorithm under various conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.32-36
• /
• 2003

Based on oriented minimum output energy (OMOE) criterion, a new blind multiuser receiving scheme of linear minimum mean square error (MMSE) detector is proposed, then an adaptive algorithm for implementing the new scheme is given by the steepest descent method, and the convergence property of the algorithm is analyzed in this paper. The numerical results demonstrate the performance of the proposed scheme.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.5
• /
• pp.453-459
• /
• 1991

This paper presents a new algorithm to select optimal parameters and location of power system stabilizer (PSS). A new performance measure, which evaluates the share of a particular mode among state responses, is introduced. The gradient of the performance measure with respect to PSS parametes is derived in an explicit form, so optimal parameters of PSS can be obtained by the steepest descent method. The machine, with which it is most probable to reduce the performance measure, is identified as the optimum site for PSS application.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.189-190
• /
• 2013

본 연구에서는 청정소화약제 소화설비의 설계인자(약제량, 약제방출량, 약제방출시간, 배관의 압력손실 등)를 최적화할 수 있는 설계프로그램을 개발하였다. 최적화 기법은 최적화 이론 중 최대 경사법(steepest descent method)을 이용하였고 목적함수와 제한조건식을 선형화시켜 최적점을 찾았다. 설계프로그램으로부터 소화설비의 시공 오차, 비용 및 시간을 줄일 수 있으며, 소화설비의 신뢰성 확보로 화재진압을 극대화할 수 있다.