• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.356-362
• /
• 2004

Using multi wrapped copper by polyimide film for HTS transformer, the breakdown and V-t characteristics of two type models for turn-to-turn, one is point contact model, the other is surface contact model, were investigated under ac and impulse voltage at 77 K. A material that is Polyimide film (Kapton) 0.025 mm thickness is used for multi wrapping of the electrode. Statistical analysis of the results using Weibull distribution to examine the wrapping number effects on V-t characteristics under at voltage as well as breakdown voltage under ac and impulse voltage in $LN_2$ was carried. Also, survival analysis was performed according to the Kaplan-Meier method. The breakdown voltages for surface contact model are lower than that of the point contact model, because the contact area of surface contact model is wider than that of point contact model. At the same time, the shape parameter of the point contact model is a little bit larger than the of the surface contact model. The time to breakdown tn is decreased as the applied voltage is increased, and the lifetime indices slightly are increased as the number of layers is increased. According to the increasing applied voltage and decreasing wrapping number, the survival probability is increased.

• Computers and Concrete
• /
• v.1 no.4
• /
• pp.389-400
• /
• 2004

The examinations carried out have confirmed a relationship existing between the character of fracture surfaces and the composition and structure of (basalt and gravel) concretes. For both concretes investigated, a very good correlation was obtained between the profile line development factor, $R_L$, and the fracture surface development factor, $R_S$. With the increase in the $R_L$ parameter, the fracture surface development factor $R_S$ also increased. Agreement between the proposed relationship of $R_S=f(R_L)$ and the proposal given by Coster and Chermant (1983) was obtained. Stereological examinations carried out along with fractographic examinations made it possible to obtain a statistical model for the determination of $R_L$ (or $R_S$) based on the volume of air voids in concrete, $V_{air}$, the specific surface of air pores, $S_V_{air}$ the specific surface of coarse aggregate, $S_{Vagg.}$, and the volume of mortar, $V_m$. An effect of coarse aggregate type on the obtained values of the profile line development factor, $R_L$, as well as on the relationship $R_S=f(R_L)$ was observed. The increment in the fracture surface development factor $R_S$ with increasing $R_L$ parameter was larger in basalt concretes than in gravel concretes, which was a consequence of the level of complexity of fractures formed, resulting chiefly from the shape of coarse aggregate grains.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.5
• /
• pp.322-328
• /
• 2020

PURPOSE. This study evaluated the shear bond strength between 3D printed provisional resin and conventional provisional resin depending on type of conventional provisional resin and different surface treatments of 3D printed resin. MATERIALS AND METHODS. Ninety-six disc-shaped specimens (Ø14 mm × 20 mm thickness) were printed with resin for 3D printing (Nextdent C&B, Vertex-Dental B. V., Soesterberg, Netherlands). After post-processing, the specimens were randomly divided into 8 groups (n=12) according to two types of conventional repair resin (methylmethacrylate and bis-acryl composite) and four different surface treatments: no additional treatment, air abrasion, soaking in methylmethacrylate (MMA) monomer, and soaking in MMA monomer after air abrasion. After surface treatment, each repair resin was bonded in cylindrical shape using a silicone mold. Specimens were stored in 37℃ distilled water for 24 hours. The shear bond strength was measured using a universal testing machine at a crosshead speed of 0.5 mm/min. Failure modes were analyzed by scanning electron microscope. Statistical analysis was done using one-way ANOVA test and Kruskal-Wallis test (α=.05). RESULTS. The group repaired with bis-acryl composite without additional surface treatment showed the highest mean shear bond strength. It was significantly higher than all four groups repaired with methylmethacrylate (P<.05). Additional surface treatments, neither mechanical nor chemical, increased the shear bond strength within methylmethacrylate groups and bis-acryl composite groups (P>.05). Failure mode analysis showed that cohesive failure was most frequent in both methylmethacrylate and bis-acryl composite groups. CONCLUSION. Our results suggest that when repairing 3D printed provisional restoration with conventional provisional resin, repair with bis-acryl composite without additional surface treatment is recommended.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1039-1048
• /
• 2011

This research develops a basic design structure for scuba diving wetsuits suitable for the shape of Korean men in their 30's as well as enhances the reduction rate for underwater activity. The clothing pressure and fitness tests were performed using four different types of body suits. The usable data of the tests were coded for further statistical analysis that includes one way-ANOVA test and S-N-K Multiple Range Test by using SPSSWIN 17.0. An analysis of the results shows: (1) The results of the clothing pressure test (using a dummy) indicated that the larger the reduction rate, the stronger the clothing pressure gets (with an exception on the knee area). It has great impact on clothing pressure with regards to the different body parts. The different reduction rates should be applied to body parts accordingly. (2) In the case of test subjects, the overall mean values of the clothing pressure were lower than the ones with the dummy (attributable to the cushion function of body skin and muscle as well as the high stretch of the fabric). (3) In evaluating the subjective fit test of four types of body suits, a statistically significant difference was found in the relation between pattern reduction rates and all parts of the body. It was revealed that the reduction rate of 'B' pattern (X: 4%, Y: 3%) was the most suitable pattern and the 'B' pattern scored highest in the motion functional fit test performed by a test subject.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.657-660
• /
• 2008

In this study, quantitative analysis on effect of hydration heat and autogenous shrinkage of concrete using BFS was studied. Especially, it analyze section data statistically which hydration heat and autogenous shrinkage rise, and it appeared the correlation of hydration heat and autogenous shrinkage as well as quantitative coefficients of the main properties. As a result, the section which hydration heat and autogenous shrinkage of BFS-50 rise rapidly is delayed than OPC, but the slope of hydration heat and autogenous shrinkage in that section appeared similar shape in each mixing. Finally it will be possible to control the amount of autogenous shrinkage because hydration heating velocity and autogenous shrinking velocity are decreased by using BFS.

• Journal of The Korean Astronomical Society
• /
• v.47 no.2
• /
• pp.49-67
• /
• 2014

A novel method to characterize the topology of the early-universe intergalactic medium during the epoch of cosmic reionization is presented. The 21-cm radiation background from high redshift is analyzed through calculation of the 2-dimensional (2D) genus. The radiative transfer of hydrogen- ionizing photons and ionization-rate equations are calculated in a suite of numerical simulations under various input parameters. The 2D genus is calculated from the mock 21-cm images of high-redshift universe. We construct the 2D genus curve by varying the threshold differential brightness temperature, and compare this to the 2D genus curve of the underlying density field. We find that (1) the 2D genus curve reflects the evolutionary track of cosmic reionization and (2) the 2D genus curve can discriminate between certain reionization scenarios and thus indirectly probe the properties of radiation-sources. Choosing the right beam shape of a radio antenna is found crucial for this analysis. Square Kilometre Array (SKA) is found to be a suitable apparatus for this analysis in terms of sensitivity, even though some deterioration of the data for this purpose is unavoidable under the planned size of the antenna core.

• Journal of Families and Better Life
• /
• v.24 no.6 s.84
• /
• pp.177-193
• /
• 2006

This study analyzes marriage and fertility rates in Korea and makes recommendations for family policy. Based on the 'The Report of Marriage & Divorce Statistics in 2005' and data from the Korea Statistical Information System (KOSIS) of the National Statistics Organization, the trends, reasons for marriage rates changes, and future expectations were critically reviewed. In addition, the relationship between marriage and fertility rates was analyzed. The principle characteristics of marriage rates are as follows: 1) the M-shape of the longitudinal crude marriage rates; 2) the increased age of individuals entering their the first marriage; 3) the increase in remarriage rates; 4) the changes in the patterns of remarriage; 5) the increased in the age at which individuals remarry and; 6) the increase in marriage to non-Koreans. The marriage and fertility rates changes are a permanent normative shift because of 1) later marriage because of women's increased education and labor force participation 2) rational choices about birth control 3) reduced population because of the aging of baby boomers 4) structural changes in the marriage market and 5) egalitarian changes in women's attitudes toward marriage and family. The recommendations for future family policy were as follows: 1) the need for a realistic, long-term family policy because the current marriage patterns will continue; 2) the need to develop new statistics such as fertility rates that are based on marriage cohort or birth cohort because family behavior is a mixture of personal, social and political responses; 3) the need for impact analysis of current family policy about increasing fertility rates; 4) the need for a new family perspective that encompasses diverse marriage and family patterns; 5) the need to focus on men's role in families because of women's changing roles and family interaction patterns and; 6) the need for preventive family policies such as family life education.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.132.2-132.2
• /
• 2012

We have investigated the characteristics of magnetic cloud (MC) and ejecta (EJ) associated coronal mass ejections (CMEs) based on the assumption that all CMEs have a flux rope structure. For this, we used 54 CMEs and their interplanetary counter parts (interplanetary CMEs: ICMEs) that constitute the list of events used by the NASA/LWS Coordinated Data Analysis Workshop (CDAW) on CME flux ropes. We considered the location, angular width, and speed as well as the direction parameter, D. The direction parameter quantifies the degree of asymmetry of the CME shape, and shows how closely the CME propagation is directed to Earth. For the 54 CDAW events, we found several properties of the CMEs as follows: (1) the average value of D for the 23 MCs (0.62) is larger than that for the 31 EJs (0.49), which indicates that the MC-associated CMEs propagate more directly to the Earth than the EJ-associated CMEs; (2) comparison between the direction parameter and the source location shows that the majority of the MC-associated CMEs are ejected along the radial direction, while many of the EJ-associated CMEs are ejected non-radially; (3) the mean speed of MC-associated CMEs (946 km/s) is faster than that of EJ-associated CMEs (771 km/s). For seven very fast CMEs (>1500 km/s), all CMEs with large D (>0.4) are associated with MCs and the CMEs with small D are associated with EJs. From the statistical analysis of CME parameters, we found the superiority of the direction parameter. Based on these results, we suggest that the CME trajectory essentially decides the observed ICME structure.

• Journal of the Korean Home Economics Association
• /
• v.46 no.1
• /
• pp.63-72
• /
• 2008

The purpose of this study was to investigate the appearance management behaviors and motives differentiated by the body image of college men. A questionnaire was designed for the survey and the subjects were 228 college in Pusan and the Kyongnam province, Korea. The statistical analyses were carried out in the forms of frequency, factor analysis, cluster analysis, ANOVA and Duncan's multiple range test. The findings throughout the research are as follows; First, according to the multidimensional body image of the subjects, the college men were classified into three groups, i.e. the appearance concerning and satisfied group, the weight concerning group, and the appearance indifferent group. The appearance management behaviors of the college men consist of innovative appearance management, weight reduction, appearance management through apparel and fashion products, body shape care, skin care, hair care and health care. Second, the weight concerning group showed a higher BMI than those of the other groups. The means of the monthly income and the expenses for the appearance management of the appearance indifferent group were lower than those of the other groups. Third, the college men were generally shown to pursue the motive improving sociality. The appearance concerning and satisfied group and the weight concerning group indicated higher pursuing motives than the appearance indifferent group in the appearance management motives. Finally, there were significant differences in the appearance management behaviors among the three groups. While the weight concerning group showed the more concerning appearance management behaviors, the appearance indifferent group had the least appearance concerning tendency.

• Journal of Fashion Business
• /
• v.4 no.1
• /
• pp.45-58
• /
• 2000

The purpose of this study is to provide for the basic data useful to the development of a quality bassiere featuring a good wearing feeling, to investigate the characteristics of breast shapes by age and suggest a brassiere sizing system for woman. For this purpose, the subjects of anthropometry were 220 women aged between 20 and 59. The anthropometric measurements were analyzed by various statistical methods mean, standard deviation, F-test, Duncan-test, Factor analysis, frequency. The results of this study can be summarized as follows; 1. According to the increase of age, the items of height were decreased and items of width, depth, circumference and length were increased, being obeser and breast point were drooped. So volume and bottom area of breast of 40 50's women were larger than 20 30's women and breast point width of 40 50's women was being wider by increase of the interior of breast. 2. From analyzing the effect of brassiere wearing, it was found that brassiere reformed the breast shape with the breast volume transferred from exterior part to interior part and the bottom area of breast diminished, so brassiere can have the breast location of adult woman up and the breast point width being centered 3. It was found that there was no direct linear relationships between under bust girth and cup size from analysis of breast measurements. Therefore those 2 factors(under bust girth and cup size) was brought into basic item of brassiere sizing system. From the dual distribution table whose intervals had been decided by KS K-0070(1999), it was picked out 12 sizes which had more than 4% of appearance for suggesting brassiere size chart. The sizing system covers 76.36% of all subjects and supply reference measurements relevant to brassiere manufacturing.