• Structural Engineering and Mechanics
• /
• 제24권1호
• /
• pp.91-105
• /
• 2006

In this paper, post-earthquake capacity evaluation method of reinforced concrete buildings was studied. Substructure pseudo-dynamic test and static loading test of first story column in a four-story R/C building was carried out in order to investigate the validity of the evaluation method proposed in the Damage Assessment Guideline (JBDPA 2001). In pseudo-dynamic test, different levels of damage were induced in the specimens by pre-loading, and input levels of seismic motion, at which the specimens reached to the ultimate stage, were examined. From the experimental result, no significant difference in damage levels such as residual crack width between the specimens under static and pseudo-dynamic loading was found. It is shown that the seismic capacity reduction factors ${\eta}$ can provide a reasonable estimation of post-earthquake seismic capacity of R/C buildings suffered earthquakes.

• 한국지진공학회논문집
• /
• 제6권2호
• /
• pp.21-28
• /
• 2002

Ductile behavior and strength of concrete-filled steel(CFS) piers was supported by many quasi-static cyclic loading tests. This test method, however, only estimates the member′s deformation capacity under escalating and repetitive displacement and ignores dynamic and random aspects of an earthquake load. Therefore, to understand complete seismic behavior of the structure against an earthquake, dynamic tests such as shaking table test and pseudo-dynamic tests are required as well as quasi-static tests. In this paper, following "Seismic Performance of Concrete-Filled Steel Piers Part I : Quasi-Static Cyclic Loadint Test", the seismic behavior of CFS and steel piers designed for I-Soo overpass in Seoul in investigated by the pseudo-dynamic test. In addition, the residual strength of both piers after an earthquake is estimated by the quasi-static test. The results show that both piers have satisfactory ductility and strength against well-known EI Centro earthquake although the CFS pier has better strength and energy dissipation than the steel pier.

• 한국도로학회논문집
• /
• 제10권1호
• /
• pp.87-95
• /
• 2008

형상이 일정하지 않은 구조에 충돌하는 차량의 탑승자 안전을 확보하기 위해서 그 구조물의 앞에 공간이 허용하는 한도의 깊이만큼 충격을 흡수하는 재료로 만든 모듈을 쌓아두는 방법을 생각할 수 있다. 충격흡수모듈로 사용되기 위해서는 재료가 충분한 에너지 흡수능력을 가져야 하고 동시에 탑승자의 안전을 확보할 수 있어야 한다. 본 논문에서는 에너지 흡수능력과 더불어 탑승자의 안전을 보장하기 위하여 충격흡수재료가 가져야 할 조건을 설명하고 auard-Guard 시스템 모듈, 샌드백, 재활용 타이어, 지오컨테이너, 지오셀 그리고 EPS 블록에 대한 정적압축실험을 실시하여 그 결과를 분석하였다. 이로부터 $30kg/m^{3}$의 밀도를 갖는 EPS 블록이 쿠션모듈로 사용되기 적합한 재료임을 보였다. 한편 시속 35.6km/h까지의 충돌조건으로 Drop Test를 실시하여 EPS블록의 정적특성과 동적특성간 큰 차이가 없음을 보여 주었으며 쿠션모듈로서의 성질을 개선시키기 위한 방안으로 EPS 블록에 공극을 두는 방안을 제안하고 공극이 있는 EPS블록에 대하여 Drop Test를 실시하여 EPS 블록을 이용한 충격흡수시설의 설계에 필요한 재료적 특성치를 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2073-2079
• /
• 2008

This study aims to investigate the residual strength of sandwich composites with Al honeycomb core and carbon fiber face sheets after the quasi-static indentation damage by the experimental investigation. The 3-point bending test and the edge-wise compressive strength test were used to find the mechanical properties. The quasi-static point load and damaged hole was applied to introduce the simulated damage on the Each damaged specimens were finally assessed by the 3-point bending test and the compressive strength test. The investigation results revealed the residual strength of the damaged specimens due to the quasi-static indentation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1679-1688
• /
• 2008

Recently, the bogie frame weight of Light Rail Transit system has been reduced in order to save energy and materials. However, this light weighted vehicle structure is very important to verify the fatigue strength at the development stage. Bogie system consists of bogie frame, suspensions, wheel-sets, braking system and transmission system. Among these components, the bogie frame is most significant component subjected to the whole vehicle and passenger loads. In this study, the bogie frame for the New LRT power car is evaluated to the static and fatigue strength. And the evaluation method is used the LRT Performance Test Standards Specification throughout the FEM analysis and static load test. The static and fatigue test results for the LRT bogie frame of power car has been appeared very safety and stable for the design load conditions.

• 한국항공우주학회지
• /
• 제42권1호
• /
• pp.67-75
• /
• 2014

항우연에서는 복합재 소형항공기(KC-100)에 대하여 15가지 전기체 시험조건과 7개의 국부적 시험조건들에 대한 전기체 정적구조시험을 수행하였다. 시험요구도, 시험일정, 시험체 및 더미구조, 시험하중산출, 시험장치, 시험장비 등을 소개하였다. 수십개의 제어채널을 사용하는 전기체 구조시험의 하중제어의 정확도를 살펴보기 위하여 U1의 시험데이터를 분석하였다. 분석결과 각 채널별 데이터 획득된 하중값은 허용오차인 SNPE(Static null pacing error)값 이내에서 잘 유지하고 있음을 보였고 본 논문의 저자가 제안한 시험의 하중제어오차 크기 정의방법을 적용한 결과 U1 시험의 하중제어 오차값이 8.6N 이었고 나머지 전기체 시험조건들에 대한 시험데이터를 분석한 결과도 보였다. 마지막으로 U1시험에서 자세제어장치에서 측정된 반력들이 시험하중 증가와 함께 변하는 것을 보였고 전기체 구조시험에서 반력변화 발생의 요인들에 대하여 기술하였다.

• Architectural research
• /
• 제18권1호
• /
• pp.39-47
• /
• 2016

A finite element analysis technology applicable to the prediction of the static nonlinear response of cable roof structure is presented. The unified kinematic description is employed to formulate the present cable element and different strain definitions such as Green-Lagrange strain, Biot strain and Hencky strain can be adopted. The Newton-Raphson method is used to trace the nonlinear load-displacement path. In the iteration process, the compressive stress of a cable element is not allowed. For the verification of the present cable element, four numerical examples are tackled. Finally, numerical results obtained by using the present cable element are provided as new benchmark test results for cable structures under static loads.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.106-113
• /
• 2004

Most of mechanical structures are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic forces for the evaluations of fatigue life and stress concentration exactly. In this study, the dynamic response of vehicle structure to external forces is classified an inverse problem involving strains from the experiment and the analysis. The practical dynamic forces are determined by the combination of the analytical and experimental method with analyzed strain by quasi-static finite element analysis under unit force and with measured strain by a strain gage under driving load, respectively. In a stressed body, inter-molecular chemical bonds are failed beyond the certain magnitude. The failure of molecular structure in material is considered as a time process of which rate is determined by mechanical stress. That is, the failure of inter-molecular chemical bonds is the fatigue lift of material. This kinetic concept is expressed as lethargy coefficient. And S-N curve is obtained with the lethargy coefficient from quasi-static tensile test. Equivalent practical dynamic force is obtained from the identification of practical dynamic force for one loading point. Using the practical dynamic force and S-N curve, fatigue life of a window pillar is analyzed with FEM under the identified force by the procedure of above mentioned.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.115-118
• /
• 2005

In this study, small scale model test was performed to verify the ultimate load capacity of spillway pier structure under static load. The 1/20 scale test specimen was made of specially designed micro-concrete and wire mesh. From the test result, the cracking load of specimen was 10 tonf and the ultimate was 19tonf. From the similarity rule, cracking and ultimate load of prototype pier structure were predicted 4000 tonf, 7600 ton, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.832-835
• /
• 2005

The objective of this research work is to investigate into static and dynamic characteristics of ISB panels with the expanded metal as an internally structured material. In order to investigate static and dynamic characteristics of ISB panels, several experiments, the tensile test, three-point bending test and impact test, are carried out. From the results of the experiments, the mechanical properties, bending stiffness and impact absorption energy of the ISB panel have been obtained. In addition, it has been shown that the static and dynamic characteristics of ISB panel are highly dependent on the crimping angle of the pyramidal structure for the expanded metal.