• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.307-310
• /
• 2003

In this paper, an iterative learning control method is applied to suppress the vibration of a 2-mass system which has a flexible coupling between a load an a motor. More specifically, conditions for the load speed without vibration are derived based on the steady-state condition. And the desired motor position trajectory is synthesized based on the relation between the load and motor speed. Finally, a PD-type learning iterative control law is applied for the desired motor position trajectory. Since the learning law applied for the desired trajectory guarantees the perfect tracking performance, the resulting load speed shows no vibration. In order to handle the initial position error, the PD-type learning law is changed to PID-type and a weight function is added to suppress the residual vibration caused by the initial error. The simulation results show the effectiveness of the proposed learning method.

• 한국경영과학회지
• /
• 제6권2호
• /
• pp.57-64
• /
• 1981

This paper develops a method of modifying the usual maximum likelihood estimators of the parameters of a two state Markov process when the trajectory of the process can only he observed at regular epochs. The method utilizes the limiting behaviors of the process and the properties of state transition counts. An efficient adaptive strategy to be used together with the modified estimator is also proposed. The properties of the new estimators and the adaptive strategy are investigated using Monte Carlo simulation.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4210-4214
• /
• 2011

Quasiclassical trajectory (QCT) calculations of Ne + ${H_2}^+$ reaction have been carried out on the adiabatic potential energy surface of the ground state $1^2$ A'. The reaction probability of the title reaction for J = 0 has been calculated, and the QCT result is consistent with the previous quantum mechanical wave packet result. Quasiclassical trajectory calculations of the four polarization-dependent differential cross sections have been carried out in the center of mass (CM) frame. The P(${\theta}_r$), P(${\phi}_r$) and P(${\theta}_r$, ${\phi}_r$) distributions, the k-k'-j' correlation and the angular distribution of product rotational vectors are presented in the form of polar plots. Due to the well in $1^2$ A' PES, the reagent vibrational excitation has greater influence on the polarization of the product rotational angular momentum vectors j' than the collision energy.

• Journal of Construction Engineering and Project Management
• /
• 제8권1호
• /
• pp.10-21
• /
• 2018

Many construction projects involve a plethora of safety-related problems that can cause loss of productivity, diminished revenue, time overruns, and legal challenges. Incorporating data collection and analytics methods can help overcome the root causes of many such problems. However, in a dynamic construction workplace collecting data from a large number of resources is not a trivial task and can be costly, while many contractors lack the motivation to incorporate technology in their activities. In this research, an Android-based mobile application, Preemptive Construction Site Safety (PCS2) is developed and tested for real-time location tracking, trajectory prediction, and prevention of potential collisions between workers and site hazards. PCS2 uses ubiquitous mobile technology (smartphones) for positional data collection, and a robust trajectory prediction technique that couples hidden Markov model (HMM) with risk-taking behavior modeling. The effectiveness of PCS2 is evaluated in field experiments where impending collisions are predicted and safety alerts are generated with enough lead time for the user. With further improvement in interface design and underlying mathematical models, PCS2 will have practical benefits in large scale multi-agent construction worksites by significantly reducing the likelihood of proximity-related accidents between workers and equipment.

• Wind and Structures
• /
• 제35권2호
• /
• pp.109-120
• /
• 2022

The force coefficients of rotating plates in the acceleration stage will vary with rotation rate from 0 to stable rotation rate w₀, which are important for quasi-steady theory of plate-like windborne debris to simulate the trajectory. In this paper, a wind tunnel experiment is carried out to study the effects of geometry and the Reynolds number on the variations of mean force coefficients of rotating plates. The rotational lift coefficients are sensitive to both geometry effect and Reynolds number effect, while the rotational drag and moment coefficients are only sensitive to geometry effect. In addition, new empirical formulas for the rotational lift coefficient and moment coefficients are proposed. Its accuracy is verified by comparing the predicted results with existing test data. Based on the experimental data of rotating plates, a new rotational force model for quasi-steady theory, which can be applied to a wider scope, is proposed to calculate the trajectory of plate-like windborne debris. The results show that the new model provides a better match with the tested trajectories than previous quasi-steady theories.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.483-488
• /
• 2001

The RC beams subjected to bending and shear are an important substructure. After flexural cracking, the internal stress state in the beam could not be explained by the classical beam theory. In this study the internal force state factor is introduced to explain the stress state change in the RC beams. The internal force state factor of uniform load was expanded by superposition method using infernal force state factor of point load. As the load types change, the operator that would be calculated the internal force state factor was proposed.

• Journal of Multimedia Information System
• /
• 제6권4호
• /
• pp.323-328
• /
• 2019

In this paper, a method of constructing an advanced sequential circuit over finite fields is proposed. The method proposed an algorithm for assigning all elements of finite fields to digital code from the properties of finite fields, discussed the operating characteristics of T-gate used to construct sequential digital system of finite fields, and based on this, formed sequential circuit without trajectory. For this purpose, the state transition diagram was allocated to the state dependency code and a whole table was drawn showing the relationship between the status function and the current state and the previous state. The following status functions were derived from the status function and the preceding table, and the T-gate and the device were used to construct the sequential circuit. It was confirmed that the proposed method was able to organize sequential digital systems effectively and systematically.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.407-411
• /
• 1992

A method for optimal route planning is presented with the assumption that the overall defended area is known in terms of threat potential function. This approach employes tangent plane to reduce the dimension of the state space for optimal programming problems with a state equality constraint. One-dimensional search algorithm is used to select the optimal route among the extermal fields which are obtained by integrating three differential equations from the initial values. In addition to being useful for the route planning through threat potential area, the trajectory planning will be suitable for general two-dimensional searching problems.

• 한국정보통신학회논문지
• /
• 제15권7호
• /
• pp.1447-1456
• /
• 2011

본 논문에서는 다중 입력을 가지는 비선형 시스템의 제어기 설계를 위한 다중 입력 T-S 퍼지 궤환 선형화 기법이 제안되었으며 그 기법을 바퀴형 이동로봇의 궤도 추적 제어를 위한 제어기를 설계하는 데에 사용하였다. 이를 위하여, 먼저 바퀴형 이동로봇의 에러 동특성 방정식을 T-S 퍼지 모델로 나타내었고, 이 퍼지 모델을 비선형 퍼지 좌표 변환과 비선형 상태 궤환 입력에 의해 하나의 선형 제어 시스템으로 변환시켰다. 시뮬레이션 결과는 본 논문에서 제안된 다중 입력 궤환 선형화 기법에 의해 설계된 궤도 추적 제어기가 T-S 퍼지 시스템을 제어하기 위해 널리 사용되어지는 기존의 PDC 기법에 의해 설계된 궤도 추적 제어기보다 더 나은 성능을 제공함을 보여주었다.

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.265-276
• /
• 2017

본 논문에서는 하중 적분 PDC 제어 기법과 T-S 퍼지 외란 관측기를 이용한 강인하면서도 보다 정확한 이동 로봇의 궤도 추적 제어 방법을 제안한다. 하중 적분 PDC 제어 기법은 PDC 제어 기법에 하중 적분 항을 추가함으로써 정상상태 오차를 감소시켜 준다. T-S 퍼지 외란 관측기는 T-S 퍼지 모델로 표현된 비선형 시스템에 대해 외란을 추정하고 상쇄시킬 수 있도록 한다. 따라서, T-S 퍼지 외란 관측기에 기반한 궤도 추적 제어기는 강인한 궤도 추적 성능을 보여준다. 또한, 본 연구에서는 $B\acute{e}zier$ 곡선에 의한 가속도 제한을 갖는 경로 설계 방법에 의해 초기 접근 경로를 설계함으로써, 이동 로봇의 초기 위치가 기준 궤도의 초기 위치와 다를 때 제어 입력이 매우 커지게 되어 실제적으로 사용할 수 없게 되는 문제를 해결한다. 제안된 궤도 추적 제어기의 성능을 시뮬레이션을 통해서 입증하였다.