• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.154-156
• /
• 2020

전기제품의 대기전력을 0.005W 미만으로 구현 할 수 있는 새로운 스위칭 제어 방법을 본 논문에서 제시하며 최소한의 소비전력을 구현하면서 제품의 기능을 유지 할 수 있는 방안에 대한 결과를 설명한다. 또한 실제 상용화되는 모니터에서의 동작원리를 설명하고 구현된 동작 특성을 바탕으로 제안한 회로의 동작원리 및 대기전력 수준을 검증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1392-1395
• /
• 2004

In order to successfully develop attitude and orbit control subsystem(AOCS), AOCS engineer performs hardware selection, controller design and analysis, control logic and interface verification on electrical test bed, integrated system test, polarity test, and finally verification on orbit after launching. Attitude and orbit control subsystem for KOMPSAT-2 consists of standby mode, sun mode, maneuver mode, science mode, and power safe mode to stabilize and to control the spacecraft for performing the mission. The sun mode is usually divided into sun point submode, earth search submode and safe hold submode. The maneuver mode is divided into attitude hold submode and ${\triangle}$ V submode, while the science mode divided into science coarse submode and science fine submode. Moreover, it is added to back-up mode which uses wheels as an actuator for sun mode and maneuver mode. In this paper, we describe the controller design process and the performance of the design results with respect to the sun mode and the maneuver mode based on thrusters as an actuator using on flexible model.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.655-658
• /
• 2005

Due to reduced device sizes and threshold voltages, leakage current becomes an important issue in CMOS design. In a CMOS combinational logic circuit, the leakage current in the standby state depends on the state of the inputs and thus can be minimized by applying an optimal input when the circuit is idling. In this paper, we present a New Input Vector Control algorithm, called Leakage Minimization by Input vector Control (LMIC) for minimal leakage power. This algorithm finds the minimal leakage vector and reduces leakage current up to 22.% on the average, for TSMC 0.18um process parameters. Minimal leakage vectors are very useful in reducing leakage currents in standby mode of operation.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.136-138
• /
• 2019

무선급전 시스템에서 대기 모드 시에도 전력을 소모하는 비중이 큰 수신부 통신 모듈을 OFF 시켜서 대기전력을 낮출 수 있다. 이때 대기모드 시 PFC 동작을 OFF 시키게 되면 추가로 대기전력을 더 낮출 수 있지만 PFC가 OFF된 상태에서는 AC 입력전압 크기에 따라 인버터 입력 전압 범위가 크게 변동하게 된다. 하지만 수신 통신 모듈 OFF시에는 무선통신을 통한 출력전압제어를 할 수 없기 때문에 안정적인 전력전달이 힘들다. 따라서 본 논문에서는 대기모드 시 출력전압을 일정 수준으로 제어하기 위해, 입력전압 크기에 따른 Feed-forward 구조를 통하여 동작 주파수를 가변 하는 무선전력전송 시스템을 구현하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2A
• /
• pp.152-161
• /
• 2007

IEEE 802.11 Wireless Local Area Network (WLAN) became a prevailing technology for the broadband wireless Internet access, and new applications such as Voice over WLAM (VoWLAN) are fast emerging today. For the battery-powered VoWLAN devices, the standby time extension is a key concern for the market acceptance while today's 802.11 is not optimized for such an operation. In this paper, we propose a novel Idle Mode operation, which comprises paging, idle handoff, and delayed handoff. Under the idle mode operation, a Mobile Host (MH) does not need to perform a handoff within a predefined Paging Area (PA). Only when the MH enters a new PA, an idle handoff is performed with a minimum level of signaling. Due to the absence of such an idle mode operation, both IP paging and Power Saving Mode (PSM) have been considered the alternatives so far even though they are not efficient approaches. We implement our proposed scheme in order to prove the feasibility. The implemented prototype demonstrates that the proposed scheme outperforms the legacy alternatives with respect to energy consumption, thus extending the standby time.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1081-1083
• /
• 2003

The CC's main objective is to manage and control the various operation of the MSC camera. The CC has capability to control the various camera operation modes such as INIT mode, WAIT mode, STANDBY mode, READY IMAGING, DEFAULT READY IMAGING, IBIT and IMAGING mode as well as to manage the interface of the PMU. This paper also shows not only the design concepts in the both of the hardware and the operational software, but also the implementation results for the various CC functions.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.56-61
• /
• 1996

In this paper, new buck converter of a TV power system is presented. First, we devised a revised driving circuit for an emitter-coupled type buck converter, by which it is possible to reduce the material cost of transformers and voltage stress of power device. Secondly, we adopted a hybrid oscillation technique. When TV system is in off-stage, initial standby power which is necessary for remote controllable TV system is supplied by self-oscillating mode. Main power which is necessry in TV system bing on state is provided by an externally triggered oscillating mode. The switching frequency is synchronized to the oscillating frequency of horizontal deflection in TV, by which we can reduce picture noises and the size of power transformer. Thirdly, a simple error amplifier is inserted to the feed-back loop to keep the output voltage constant which means pulse width modulatio mode is added in driving part of power device. Finally, we showed by experiments that our proposed converter performs well enough to be close to the theoretically predicted values.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.433-434
• /
• 2007

This paper describes a low-voltage dynamic random-access memory (DRAM) focusing on subthreshold leakage reduction during self-refresh (sleep) mode. By sharing a power switch, multiple iterative circuits such as row and column decoders have a significantly reduced subthreshold leakage current. To reduce the leakage current of complex logic gates, dual channel length scheme and input vector control method are used. Because all node voltages during the standby mode are deterministic, zigzag super-cutoff CMOS is used, allowing to Preserve internal data. MTCMOS technique Is also used in the circuits having no need to preserve internal data. Sub-1.2-V 1-Gb mobile DDR DRAM employing all these low-power techniques was designed in a 60 nm CMOS technology and achieved over 77% reduction of overall leakage current during the self-refresh mode.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2001.11a
• /
• pp.105-108
• /
• 2001

전기화재의 출화 형태는 i) 전기 배선 및 전기 기기에 의한 출화, ii) 누전에 의한 출화, iii) 정정기 불꽃에 의한 출화 등이 있다. i)과 ii)는 전기의 통전 또는 standby mode에서 출화된 화재를 말하며, iii)은 축적된 전하의 이동에 의해 발생한 화재를 말한다. 그리고 출화 원인은 단락, 과부하, 반단선, 트래킹과 흑연화 현상, 누전, 접촉 불량 및 아산화동 증식 발열 현상, 방전, 정전기 불꽃, 은 이동 등이 있다.(중략)

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2171-2176
• /
• 2012

PCs and its peripherals uses more power in standby mode even if they are not actually being used. In particular, PCs and its peripherals used in school and office, plugged in at all times during working hours, but not used much time, even if turned off consume a portion of the power. In this paper, we developed Networked Smart Plug for Power Management of PC & Peripherals which is consist of EMS, Smart Plug, PC Agent and Smart Phone App. for power saving of PC and a variety of peripheral devices in office or home, and evaluated the performance of the system.