• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.3
• /
• pp.129-137
• /
• 2007

MPEG-4 FGS is one of scalable video coding schemes specified In ISO/IEC 14496-2 Amendment 2, and particularly standardized as a scheme for providing fine granular quality and temporal scalabilities. In this paper, we propose a sign-bit reduction technique in embedded bit-plane coding to enhance the coding efficiency of MPEG-4 FGS system. The general structure of the FGS system for the proposed scheme is based on the standard MPEG-4 FGS system. The proposed FGS enhancement-layer encoder takes as input the difference between the original DCT coefficient and the decision level of the quantizer instead of the difference between the original DCT coefficient and its reconstruction level. By this approach, the sign information of the enhancement-layer DCT coefficients can be the same as that of the base-layer ones at the same frequency index in DCT domain. Thus, overhead bits required for coding a lot of sign information of the enhancement-layer DCT coefficients in embedded bit-plane coding can be removed from the generated bitstream. It is shown by simulations that the proposed FGS coding system provides better coding performance, compared to the MPEG-4 FGS system in terms of compression efficiency.

• Journal of Korean Academy of Nursing
• /
• v.35 no.1
• /
• pp.47-55
• /
• 2005

Purpose: This study was to evaluate the validity of the Pediatric Index of Mortality Ⅱ(PIM Ⅱ). Method: The first values on PIM Ⅱ variables following ICU admission were collected from the patient's charts of 548 admissions retrospectively in three ICUs(medical, surgical, and neurosurgical) at P University Hospital and a cardiac ICU at D University Hospital in Busan from January 1, 2002 to December 31, 2003. Data was analyzed with the SPSSWIN 10.0 program for the descriptive statistics, correlation coefficient, standardized mortality ratio(SMR), validity index(sensitivity, specificity, positive predictive value, negative predictive value), and AUC of ROC curve. Result: The mortality rate was 10.9% (60 cases) and the predicted death rate was 9.5%. The correlation coefficient(r) between observed and expected death rates was .929(p<.01) and SMR was 1.15. Se, Sp, pPv, nPv, and the correct classification rate were .80, .96, .70, .98, and 94.0% respectively. In addition, areas under the curve (AUC) of the receiver operating characteristic(ROC) was 0.954 (95% CI=0.919～0.989). According to demographic characteristics, mortality was underestimated in the medical group and overestimated in the surgical group. In addition, the AUCs of ROC curve were generally high in all subgroups. Conclusion: The PIM Ⅱ showed a good, so it can be utilized for the subject hospital. better.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.6
• /
• pp.8-13
• /
• 2015

Recently, Illumination industry of LED module has been focused to industry technology for energy conservation of nation. The LED device is excellent to power efficiency due to semiconductor light source element. And the application to the lighting circuit technology can be designed to the sensitive lighting system for human sensitivity control. In this paper, as a process for analyzing the operating temperature of standardized electronic device including LED device has analyzed about fusing character with in designed micro fuse for electronic device protection from the over current. Using the de-rating technique, which is performed to micro fuse fusing test in the range of $-30^{\circ}C{\sim}120^{\circ}C$ thermostatic chamber. To the output data in each temperature zone, it is performed to first-order linear fitting. Additionally, applying the resistance temperature coefficient and statistical data for the reliable analysis has derived to the metal element resistance of micro fuse with temperature change of the thermostatic chamber. As a research result, The changed temperature effect of thermostatic chamber was confirmed regarding fusing time change.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.67-75
• /
• 2007

This paper deals with the research for the effects of the operating parameters that could be used for a transcritical $CO_2$ mobile air-conditioning system on the cooling performance. The experimental conditions of the performance tests for a system and components such as a gas cooler and an evaporator were suggested to compare the performance of each with the standardized test conditions. And this research presents experimental results for the performance characteristics of a $CO_2$ mobile air conditioning system with various operating conditions such as different gas cooler inlet pressures and frontal air velocities/temperatures passing through an evaporator and a gas cooler. Experimental results show that the cooling capacity was more than 5kW and coefficient of performance (COP) was more than 2.1, also. Therefore, we checked that the mobile air-conditioning system using $CO_2$ has good performance compared to that using HFC-134a.

• Journal of Korean Academy of Nursing
• /
• v.50 no.4
• /
• pp.611-620
• /
• 2020

Purpose: The aim of this study was to evaluate the reliability and validity of the Korean version of the Wong and Law Emotional Intelligence Scale (K-WLEIS). Methods: Data were collected from 360 nursing students using a self reported questionnaire. Exploratory and confirmatory factor analysis were used to test construct validity. Convergence validity was identified by correlation with communication competency. Item convergent and discriminant validity were also analyzed. Reliability was evaluated internal consistency and test-retest reliability. Results: The results of exploratory factor analysis showed that the eigen values ranged from 1.34 to 5.86 and 73.2% of the total explained variance. Confirmatory factor analysis showed adequate model fit indices (χ²/df 1.89, RMSEA .07, GFI .89, CFI .95, and TLI .93) and standardized factor loadings (.48 to .87). The average extracted variances (.71 to .79) and composite reliability (.80 to .87) validated convergence and discriminant validity of the items. Test-retest reliability of intra-class correlation coefficient was .90 and the Cronbach's alpha coefficient was .88. Conclusion: The K-WLEIS is an appropriate scale for measuring the emotional intelligence of Korean nursing students. Therefore, it is expected that the K-WLEIS will be used for nursing education programs to improve nursing students' emotional intelligence.

• Journal of Korean Academy of Oral Health
• /
• v.42 no.4
• /
• pp.175-180
• /
• 2018

Objectives: This study aimed to evaluate the relationship between oral health professionals' knowledge, attitude, and practice with regard to infectious waste management and to identify related factors influencing it. Methods: The study comprised of 219 oral health professionals from select dental clinics and public health centers recruited between August 25, 2016 and September 5, 2016, who agreed to participate in the study with full understanding of the study objectives. A self-reported questionnaire was administered, which consisted of 22 items on knowledge of infectious waste management, 9 items on attitude, and 16 items on practice. Data were analyzed using Pearson's correlation coefficient and stepwise multiple regression analyses. Results: The age, knowledge, and clinical attitude of oral health professionals significantly correlated with waste management practice. Specifically, infectious waste management practice improved with increasing age, a greater level of knowledge, and a more positive clinical attitude. Additionally, the standardized regression coefficient demonstrated that, of these three factors, clinical attitude more strongly correlated with effective waste management practice, followed by age and level of knowledge. Conclusions: These results indicated that oral health professionals had a low level of knowledge regarding infectious waste management, and a more positive clinical attitude resulted in better practices. Therefore, the development of detailed and active education guidelines and strategies are needed to enhance the attitude, knowledge, and practice of oral health professionals with regard to infectious waste management.

• Journal of Korean Society on Water Environment
• /
• v.39 no.4
• /
• pp.269-287
• /
• 2023

The genus-level biotic index of benthic macroinvertebrates (Benthic Macroinvertebrates Genus Index, BMGI) was developed and applicated based on the data collected from 13,347 sampling units of 814 sites from 2010 to 2021 in Korea. Tolerant values of 274 indicator taxa were established by analyzing the relationship between the relative frequency and abundance of indicator taxa and the water quality index considering biochemical oxygen demand (BOD₅), total suspended solids (TSS), and total phosphorus (T-P). BMGI showed a slightly higher correlation with water quality than the species-level biotic index (Benthic Macroinvertebrates Index, BMI) that was developed and applied in Korea. Although the BMGI does not contain species-level information, the reason why BMGI shows higher applicability than BMI seems to be due to the increase in the number of indicator taxa and the decrease in the misidentification of immature aquatic insects. The coefficient of determination in multiple regression with BOD₅, TSS, and TP for BMGI was 0.62 in the long-term averaged data of 814 sites, and the standardized coefficient of BOD₅ was -0.46, TSS was -0.17 and T-P was -0.21, respectively. As a result of the evaluation by BMGI, of the 814 sites, 38% were in good, 25% in fair, and 37% in poor condition.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.33-42
• /
• 1999

Geometrically standardized dental radiographs were taken. We prepared Digital Cu-Equivalent Image Analyzing System for quantitative assessment of mandible bone. Images of radiographs were digitized by means of Quick scanner and personal Mcquintosh computer. NIH image as software was used for analyzing images. A stepwedge composed of 10 steps of 0.1mm copper foil in thickness was used for reference material. This study evaluated the effects of step numbers of copper wedge adopted for calculating equation. kVp and exposure time on the coefficient of determination(r²)of the equation for conversion to Cu-equivalent image and the coefficient of variation and Cu-Eq value(mm) measured at each copper step and alveolar bone of the mandible. The results were as follows: 1. The coefficients of determination(r²) of 10 conversion equations ranged from 0.9996 to 0.9973(mean=0.9988) under 70kVp and 0.16 sec. exposure. The equation showed the highest r was Y=4.75614612-0.06300524x +0.00032367x² -0.00000060x³. 2. The value of r² became lower when the equation was calculated from the copper stepwedge including 1.0mm step. In case of including 0mm step for calculation. the value of r showed variability. 3. The coefficient of variation showed 0.11, 0.20 respectively at each copper step of 0.2, 0.1mm in thickness. Those of the other steps to 0.9 mm ranged from 0.06 to 0.09 in mean value. 4. The mean Cu-Eq value of alveolar bone was 0.14±0.02mm under optimal exposure. The values were lower than the mean under the exposures over 0.20sec. in 60kVp and over 0.16sec. in 70kVp. 5. Under the exposure condition of 60kVp 0.16sec.. the coefficient of variation showed 0.03. 0.05 respectively at each copper-step of 0.3, 0.2mm in thickness. The value of r² showed over 0.9991 from both 9 and 10 steps of copper. The Cu-Eq value and the coefficient of variation was 0.14±0.01mm and 0.07 at alveolar bone respectively. In summary. A clinical application of this system seemed to be useful for assessment of quantitative assessment of alveolar provided high coefficient of determination is obtained by the modified adoption of copper step numbers and the low coefficient of variation for the range of Cu-Equivalent value of alveolar bone from optimal kVp and exposure time for each x-ray machine.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.978-986
• /
• 2005

The color of apparel products have a close relationship with the face skin colors of consumers. In order to extract the favorable colors which flatter to consumer's face skin colors, this study was carried our to classify the face skin colors of Korean females. The criteria that select new subjects who have the classified face skin colors have to be decided. With color spectrometer, JX-777, face skin colors of subjects were measured and classified into three clusters that had similar hue, value and chroma with Munsell Color System. Sample size was 324 Korean females and other new 10 college girls. Data were analyzed by K-means cluster analysis, ANOVA, Duncan multiple range test, Stepwise discriminant analysis using SPSS Win. 12. Findings were as follows: 1. 324 subjects who have YR colors were clustered into 3 face skin color groups. 2. Discriminant variables of face skin colors were 5 variables : b value of cheek, V value of forehead, L value of cheek, C value of forehead and H value of cheek by the standardized canonical discriminant function coefficient 1. 3. Hit ratio of type 1 was $96.8\%$, of type 2 was $94.9\%$, of type 3 was $100.0\%$ and mean of hit ratio was $96.9\%$ by canonical discriminant function of 5 variables. 4. With the unstandardized canonical discriminant function coefficient and constant, canonical discriminant function equation 1 and 2 were calculated. And cutting score and range of score of the classified types were computed. The criteria that select the new subjects were decided.

• Journal of Families and Better Life
• /
• v.24 no.1 s.79
• /
• pp.71-82
• /
• 2006

The purpose of this study was to develop a standardized scale to measure consumers' motivation to purchase based on a self-determination theory. A preliminary 27-item scale was developed through literature review, diary analysis, and FGI. A questionnaire survey was conducted among 1,000consumers on internet using the preliminary scale. Then a series of tests, such as test-retest, item analysis, item-to-total correlation, Cronbach's reliability coefficient, and factor analysis, were conducted using the survey data. The final scale with21 items was constructed in the end. The Purchase Motivation Scale for Consumers consisted of five factors: (1) external motivation, (2) introjected motivation, (3) identified motivation I: self-respect, (4) identified motivation II: pursuit of harmony, and (5) internal motivation.