• 콘크리트학회논문집
• /
• 제23권5호
• /
• pp.559-567
• /
• 2011

효율적인 철근콘크리트 구조물을 설계 시공하기 위하여, 최근 들어 고강도 철근에 대한 연구가 활발히 진행되고 있다. 그러나 고강도 철근은 일반강도 철근에 비하여 연신 능력이 낮은 것이 일반적이므로, 기존의 최소 연신율규격을 만족하지 못할 가능성이 있다. 또한 국내외 철근 규격의 최소 연신율 규정과 표점 거리 규정은 각 규격마다 상이하여, 동일한 철근이라도 적용하는 규격에 따라 적합 여부가 다르게 평가된다. 따라서 각 철근 규격을 비교 검토하고, 국내의 철근 규격 KS D 3504의 규정이 합리적인지 검토할 필요가 있다. 이 연구에서는 한국, 미국, 일본, 유럽, ISO 등 국내외 철근 규격의 최소 연신율 규정과 표점 거리 규정을 비교 분석하고, 철근 인장시험을 통하여 규격의 엄격성을 평가하였다. 그 결과, 국내 철근 규격인 KS D 3504가 가장 엄격한 것으로 평가되었다. 이 엄격성 비교 결과를 바탕으로 KS D 3504의 일반용 철근 규격의 최소 연신율 규정을 수정할 것을 제안하였으며, 내진용 철근 규격을 제안하였다.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.128-136
• /
• 2010

In according with concrete structural design standard, it is common designing flexure reinforcement concrete to induce tension failure. So reinforcing ratio is limited to inducing tension failure. And maximum reinforcing ratio is regulated to protecting concrete compression strength caused by over reinforced building. Minimum reinforcing ratio is also limited in designing standard to protecting brittle failure as extremely using less reinforcing bar. But in minimum reinforcing ratio it is extremely conservative or it is sometimes impossible to induce stable tension-failure because they are depending on yield failure and experienced method and concrete designing standard strength. Therefore the purpose of the present paper is to evaluate the flexural behavior of minimum steel ratio of reinforced concrete of beams and to propose the guide-line of equation of minimum steel ratio by performing static flexural test of 16 beams according to size effect, number of steel, yielding stress of steel, and concrete compressive strength which are presumed effective variables. From experimental results, the equation of minimum steel ratio was newly proposed considered size effect.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.124-127
• /
• 2004

This study is to investigate the bond characteristics of glass fiber reinforced polymer(GFRP) reinforcing bars in concrete by pullout test experimentally. Three different types of GFRP bars with different surface deformations were considered in this study. Also, standard deformed steel reinforcing bar with or without epoxy-coating were included for the comparisons of bond strength. All test procedures including specimens preparation, test apparatus and measuring devices were made according to the recommendation of CSA(Canadian Standards Association) Standard S806-02. From the test results, it was found that small surface indentations contributed to increase the bond strength of GFRP bar significantly. Based on the limited test results till now, the bond strength of GFRP bar with sand-coated deformation commercially available in foreign market is around $80\%$ of that of steel deformed bars.

• 대한건축학회논문집:구조계
• /
• 제34권1호
• /
• pp.41-51
• /
• 2018

In case of evaluating the bond stress of a void deck plate using a wire steel, there is no standard formula considering both the influence on the void and the type of the reinforcing bar. Therefore we proposed a model equation considered the bond characteristics of the void deck plate. A total of 46 specimens was carried out a direct pull-out test and the test variables were the presence of a void body, type of reinforcing bar, the inner cover thickness according to the location of reinforcing bars and bond region. As a result of the comparison between the steel bar and steel wire, the bond stress of the steel wire with the relative rib area of 0.071 is 4.5 ~ 28.58% lower than that of the steel bar with 0.092 and the bond stress reduction rate increases when the inner cover thickness is insufficient. In the case of the inner cover thickness of $1.7d_b$ and $2.7d_b$, the bond stress was reduced to 48.7 ~ 68.4%. In the inner cover thickness was $4.9d_b$ and $5.2d_b$, the bond stresses were equivalent to those of the solid specimens. It was confirmed that the average bond stress and strain were affected by the inner cover thickness. Therefore the predicted model for one module of the void deck plate is proposed and verified by considering the bond characteristics of the void deck plate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1233-1237
• /
• 2000

In this study, we measured and assay the analysis of chloride ion in cement hydration by the standard method of JCI and understand the mutual relation between added contents and result. The purpose of this research is to provide fundamental information for the deterioration of the reinforcing concrete on account of steel of reinforced steel to repress.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권1호
• /
• pp.199-207
• /
• 2018

이형철근과 FRP 보강근의 복합 이중근을 갖는 FRC 보의 휨성능을 평가하기 위하여 실험이 수행되었다. 인장근의 종류(CFRP 보강근, GFRP 보강근, 철근)과 PVA 섬유 혼입률(0.5%, 0%)을 주요변수로 한 7개의 실험체를 제작하였다. 유한요소해석을 통하여 FRC 보의 균열 및 휨거동을 예측하기 위한 해석적 방법이 제안되고 분석되었다. 복합 이중근을 가지는 실험체들에서 철근으로 이중근을 가지는 실험체가 철근과 FRP 보강근을 이단으로 배치한 실험체들에 비하여 26~34% 균열하중이 큰 것으로 나타났다. 최대 휨강도에서는 복합 이중근을 가지는 실험체들 중 CFRP 보강근을 최외측으로 한 실험체가 가장 큰 내력을 나타내었다. 해석과 실험을 통한 휨강도를 비교한 결과, 강도비는 평균 1.2, 표준편차 0.085, 최대 오차율은 22% 등으로 나타났다. 이러한 결과에서 본 연구의 유한요소해석방법이 복합 이중근을 가지는 보의 실제 거동을 효과적으로 표현할 수 있음을 알 수 있다.

• Structural Engineering and Mechanics
• /
• 제22권3호
• /
• pp.311-330
• /
• 2006

Standard compression tests of steel fiber reinforced concrete (SFRC) cylinders are conducted to formulate compressive stress versus compressive strain relationship of SFRC. Axial pullout tests of SFRC specimens are also conducted to explore its tensile stress strain relationship. Cover concrete spalling and reinforcement buckling models developed originally for normal reinforced concrete are modified to extend their application to SFRC. Thus obtained monotonic material models of concrete and reinforcing bars in SFRC members are combined with unloading/reloading loops used in the cyclic models of concrete and reinforcing bars in normal reinforced concrete. The resulting path-dependent cyclic material models are then incorporated in a finite-element based fiber analysis program. The applicability of these models at member level is verified by simulating cyclic lateral loading tests of SFRC columns under constant axial compression. The analysis using the proposed SFRC models yield results that are much closer to the experimental results than the analytical results obtained using the normal reinforced concrete models are.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.1067-1085
• /
• 2016

Recent research on steel moment-resisting connection between steel beams and concrete filled steel tubes has shown that there are considerable advantages to be obtained by anchoring the connection to the concrete infill within the tube using anchors in blind bolts. In the research reported here, extensive experimental tests and numerical analyses have been performed to study the anchorage behaviour of cogged deformed reinforcing bars within concrete filled circular steel tubes. This data in essential knowledge for the design of the steel connections that use anchored blind bolts, both for strength and stiffness. A series of pull-out tests were conducted using steel tubes with different diameter to thickness ratios under monotonic and cyclic loading. Both hoop strains and longitudinal strains in the tubes were measured together with applied load and slip. Various lead-in lengths before the bend and length of tailed extension after the bend were examined. These dimensions were limited by the dimensions of the steel tube and did not meet the requirements for "standard" cogs as specified in concrete standards such as AS 3600 and ACI 318. Nevertheless, all of the tested specimens failed by bar fracture outside the steel tubes. A comprehensive 3D Finite Element model was developed to simulate the pull-out tests. The FE model took into account material nonlinearities, deformations in reinforcing bars and interactions between different surfaces. The FE results were found to be in good agreement with experimental results. This model was then used to conduct parametric studies to investigate the influence of the confinement provided by the steel tube on the infilled concrete.

• 한국화재소방학회논문지
• /
• 제26권6호
• /
• pp.72-77
• /
• 2012

콘크리트-강재 합성보가 고온에 노출된 경우 콘크리트는 강재를 피복하여 온도상승을 지연시키거나 보 내부의 수열용량을 높이는 역할을 한다. 한편 재료 간 일체화로 부재의 강도가 보완되기 때문에 일반적으로 단순 강재 보 보다 합성보의 내화성능이 유리하게 나타난다. 합성보에서 외부에 노출된 강재의 온도상승은 부재 단면의 형상 및 강재의 노출정도와 직접 관련하게 된다. 본 연구에서는 합성보와 일반철골보에 내화인정을 받은 내화뿜칠재를 동일 두께로 피복하여 표준화재조건의 내화실험을 실시하고, 그 결과로 나타난 강재의 온도이력과 단면형상계수와의 관계를 비교 분석하였다. 강재 온도 측정결과와 부재별 단면형상계수의 상관관계를 살펴본 결과 상관성이 매우 높은 것으로 나타났다. 이 결과는 부재의 내화성능에 영향을 미치는 명확한 조건에 의해 비교우위의 성능예측이 가능한 경우 부재별 개별 인정 없이 표준구조 인정을 통한 보편적인 사용이 가능할 수 있음을 시사한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.201-202
• /
• 2012

Recently, High-Strength steel reinforcement has been studied throughout the internal and external. One of the advantages using High-Strength steel reinforcement in construction is the economic effect due to the decreasing of its quantity. Also, another good effect is the increases of workability by reason of reducing the congestion. But, realistically it is not used in nuclear power plant construction site because of the restriction of design standard. The purpose of this report secures the reliability and changes the code through the performance evaluation test of the wall using the high-strength steel reinforcement in nuclear power plant.