Experimental and analytical behaviour of cogged bars within concrete filled circular tubes |
Pokharel, Tilak
(Infrastructure Department, University of Melbourne)
Yao, Huang (Infrastructure Department, University of Melbourne) Goldsworthy, Helen M. (Infrastructure Department, University of Melbourne) Gad, Emad F. (Faculty of Science, Engineering and Technology, Swinburne University of Technology) |
1 | Abaqus (2012), Abaqus User Manual; Dassault Systems. |
2 | ACI (2005), ACI Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05); American Concrete Institute. |
3 | AS/NZS4671 (2001), AS/NZS4671 Steel Reinforcing Materials; Standards Australia, Sydney, Australia. |
4 | AS1163 (1991), AS1163 Cold-formed structural steel hollow sections; Standards Australia, Sydney, Australia. |
5 | AS3600 (2001), AS3600 Concrete structures; Standards Australia, Sydney, Australia. |
6 | Ashadi, H. and Bouwkamp, J. (1995), "Behaviour of hybrid composite structural earthquake resistant joints", Proceedings of the 10th European Conference on Earthquake Engineering, Rotterdam, The Netherlands, pp. 1619-1624. |
7 | CEN (2004), Eurocode 2: Design of Concrete Structures-Part 1-1: General Rules and Rules for Buildings; European Committee for Standardization, Brussels, Belgium. |
8 | Eligehausen, R., Popov, E. and Bertero, V. (1983), "Local bond stress-slip relationships of deformed bars under generalized excitations", Report No. UCB/EERC 83-23; University of California, Berkeley, CA, USA. |
9 | Haskett, M., Oehlers, D.J. and Mohamed Ali, M.S. (2008), "Local and global bond characteristics of steel reinforcing bars", Eng. Struct., 30(2), 376-383. DOI |
10 | Hossain, A. and Khandaker, M. (2008), "Bond characteristics of plain and deformed bars in lightweight pumice concrete", Construct. Build. Mater., 22(7), 1491-1499. DOI |
11 | Kamal, M.M., Safan, M.A. and Al-Gazzar, M.A. (2013), "Steel-concrete bond potentials in self-compacting concrete mixes incorporating dolomite powder", Adv. Concrete Construct., 1(4), 273-228 DOI |
12 | Kang, T.H.K., Ha, S.S. and Choi, D.U. (2010), "Bar pullout tests and seismic tests of small-headed bars in beam-column joints", ACI Struct. J., 107(1), 32-42. |
13 | Mirza, O. and Uy, B. (2011), "Behaviour of composite beam-column flush end-plate connections subjected to low-probability, high-consequence loading", Eng. Struct., 33(2), 647-662. DOI |
14 | Scott, R.H. (1996), "Intrinsic mechanisms in reinforced concrete beam-column connection behaviour", ACI Struct. J., 93(3), 336-346. |
15 | Paulay, T. and Priestley, M. (1992), Seismic Design of Reinforced Concrete and Masonry Buidlings, John Wiley & Sons. |
16 | Pitrakkos, T. and Tizani, W. (2013), "Experimental behaviour of a novel anchored blind-bolt in tension", Eng. Struct., 49, 905-919. DOI |
17 | Plizzari, G., Deldossi, M. and Massimo, S. (1998), "Transverse reinforcement effects on anchored deformed bars", Magazine of Concrete Research, 50(2), 161-177. DOI |
18 | Seo, J., Lee, G.C., Liang, Z. and Dargush, G.F. (2014), "Configuration and size effects on bond stress-slip and failure modes of RC connections", J. Eng. Mec., 140(11), 04014082. DOI |
19 | Soroushian, P. and Choi, K. (1989), "Local bond of deformed bars with different diameters in confined concrete", ACI Struct. J., 86(2), 217-222. |
20 | Soroushian, P., Obaseki, K., Nagi, M. and Rojas, M.C. (1988), "Pullout behaviour of hooked bars in exterior beam-column connections", ACI Struct. J., 85(3), 269-276. |
21 | Soroushian, P., Choi, K., Park, G. and Aslani, F. (1991), "Bond of deformed bars to concrete: Effects of confinement and strength of concrete", ACI Mater. J., 88(3), 227-232. |
22 | Tizani, W., Ali, A.-M., Owen, J.S. and Pitrakkos, T. (2013), "Rotational stiffness of a blind-bolted connection to concrete-filled tubes using modified hollo-bolt", J. Construct. Steel Res., 80, 317-331. DOI |
23 | Yao, H., Goldsworthy, H. and Gad, E. (2008), "Experimental and numerical investigation of the tensile behavior of blind-bolted T-stub connections to concrete-filled circular columns", J. Struct. Eng., 134(2), 198-208. DOI |