Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Post-peak response analysis of SFRC columns including spalling and buckling

  • Dhakal, Rajesh P. (Department of Civil Engineering, University of Canterbury)
  • Received : 2005.05.17
  • Accepted : 2005.10.21
  • Published : 2006.02.20
⟨ Previous Next ⟩

Abstract

Standard compression tests of steel fiber reinforced concrete (SFRC) cylinders are conducted to formulate compressive stress versus compressive strain relationship of SFRC. Axial pullout tests of SFRC specimens are also conducted to explore its tensile stress strain relationship. Cover concrete spalling and reinforcement buckling models developed originally for normal reinforced concrete are modified to extend their application to SFRC. Thus obtained monotonic material models of concrete and reinforcing bars in SFRC members are combined with unloading/reloading loops used in the cyclic models of concrete and reinforcing bars in normal reinforced concrete. The resulting path-dependent cyclic material models are then incorporated in a finite-element based fiber analysis program. The applicability of these models at member level is verified by simulating cyclic lateral loading tests of SFRC columns under constant axial compression. The analysis using the proposed SFRC models yield results that are much closer to the experimental results than the analytical results obtained using the normal reinforced concrete models are.

Keywords

References

  1. An, X., Maekawa, K. and Okamura, H. (1997), 'Numerical simulation of size effect in shear strength of RC beams', J. Materials., Conc. Struct., Pavements. JSCE, 564(35), 297-316
  2. CEB (1996), RC Elements under Cyclic Loading - State ofthe Art Report, Thomas Telford
  3. Dhakal, R.P. and Maekawa, K. (2002a), 'Modeling for postyield buckling of reinforcement', J. Struct. Engrg., ASCE, 128(9), 1139-1147 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1139)
  4. Dhakal, R.P. and Maekawa, K. (2002b), 'Path-dependent cyclic stress-strain relationship of reinforcing bar including buckling', Engrg. Structs., 24(11), 1383-1396 https://doi.org/10.1016/S0141-0296(02)00080-9
  5. Dhakal, R.P. and Maekawa, K. (2002c), 'Reinforcement stability and fracture of cover concrete in reinforced concrete members', J. Struct. Engrg., ASCE, 128(10), 1253-1262 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:10(1253)
  6. Fanella, D. and Naaman, A.E. (1982), 'Stress-strain properties of fiber reinforced mortar in compression', ACI J., 82(4), 475-583
  7. Hsu, L.S. and Hsu, C.T. (1994), 'Stress-strain behavior of steel fiber high strength concrete under compression', ACI Struct. J, 94(4),448-457
  8. Kosaka, Y., Tanigawa, Y. and Hatanaka, H. (1984), 'Experimental study on inelastic stress-strain behavior of steel fiber reinforced concrete under compression', Transactions of AIJ, 337, 15-24
  9. Maekawa, K. and Okamura, H. (1983), 'The deformational behavior and constitutive equation of concrete using the elasto-plastic and fracture model', J. of Faculty of Engrg., Univ. of Tokyo (B), 37(2), 253-328
  10. Maekawa K. (2000), General Information of COM3 (Concrete Model in 3-D) Version 9.5 - A User's Manual. Dept. of Civ. Engrg., Univ. of Tokyo
  11. Masuda, A., Matsuoka, S., Matsuo, S. and Takeda, Y. (1997), 'Static alternating cyclic loading tests of steel fiber reinforced concrete columns', Proc. of JCI Annual Conf., 19(2), 1521-1526, (in Japanese)
  12. Matsuoka, S., Matsuo, S., Masuda, A. and Yanagi, H. (1997), 'A test method for tensile property of steel-fiberreinforced concrete', J. Materials., Conc. Struct., Pavements, JSCE, 564(35), 145-153
  13. Menegotto, M. and Pinto, P.E. (1973), 'Method of analysis of cyclically loaded RC plane frames including changes in geometry and non-elastic behavior of elements under normal force and bending', Preliminary Report, IABSE, 13, 15-22
  14. Okamura, H. and Maekawa, K. (1991), Nonlinear Analysis and Constitutive Models of Reinforced Concrete, Gihodo Publication, Tokyo
  15. Someh, A.K. and Saeki, N. (1996), 'Prediction for the stress-strain curve of steel fiber reinforced concrete', Proc. of JCI Annual Conf, 18(1), 1149-1154

Cited by

  1. Design of transverse reinforcement to avoid premature buckling of main bars vol.47, pp.1, 2018, https://doi.org/10.1002/eqe.2944
  2. Mixed model for the analytical determination of critical buckling load of passive reinforcement in compressed RC and FRC elements under monotonic loading vol.150, 2017, https://doi.org/10.1016/j.engstruct.2017.07.026
  3. Effect of steel fibres on mechanical properties of high-strength concrete vol.31, pp.5, 2010, https://doi.org/10.1016/j.matdes.2009.11.025
  4. Controlling the damage of concrete columns through compression yielding vol.18, pp.8, 2011, https://doi.org/10.1002/stc.409
  5. Buckling of steel and Ni-Ti reinforcements in very high performance concrete (VHPC) elements vol.160, 2018, https://doi.org/10.1016/j.conbuildmat.2017.11.113
  6. Application of fiber element in the assessment of the cyclic loading behavior of RC columns vol.34, pp.3, 2006, https://doi.org/10.12989/sem.2010.34.3.301
  7. Compressive behavior of short fibrous reinforced concrete members with square cross-section vol.37, pp.6, 2006, https://doi.org/10.12989/sem.2011.37.6.649
  8. Required tie spacing to prevent inelastic local buckling of longitudinal reinforcements in RC and FRC elements vol.160, pp.None, 2006, https://doi.org/10.1016/j.engstruct.2018.01.048
  9. Investigation on axial load-shorting behaviour of high strength concrete encased steel composite section vol.227, pp.None, 2021, https://doi.org/10.1016/j.engstruct.2020.111401
  10. Effect of loading history on axial cyclic behaviour of RC prisms representing wall boundary zones vol.233, pp.None, 2006, https://doi.org/10.1016/j.engstruct.2021.111871
  11. Designing and detailing transverse reinforcement to control bar buckling in rectangular RC walls vol.54, pp.3, 2021, https://doi.org/10.5459/bnzsee.54.3.228-242