• 공업화학
• /
• 제24권3호
• /
• pp.333-336
• /
• 2013

산업현장에서 배출되는 저온($150{\sim}250^{\circ}C$)의 배기가스에 포함된 질소산화물($NO_x$)을 제거하기 위한 공정으로써 산화 촉매와 암모니아 SCR 공정을 복합시킨 fast SCR 탈질공정에 대한 실험적인 연구가 수행되었다. Fast SCR 탈질공정을 위해서는 산화촉매를 이용 NO를 $NO_2$로 전환하는 것이 요구된다. 산화촉매 부피(Oxidation Catalyst Volume, OCV)에 따른 NO 전환율을 실험적으로 확인하였다. OCV 563000 h, 375000 h, 281000 h 각 경우에 NO 전환율은 37% : 45% : 51%이었다. 온도에 따른 fast SCR 탈질효율은 $NO_2/NO_x$ 비율 45%일 때 가장 높았다. $NO_2/NO_x$ 비율 45%, 온도 $200{\sim}250^{\circ}C$ 및 공간속도 $10000{\sim}30000h^{-1}$에서 standard SCR과 fast SCR 탈질효율을 비교한 결과, standard SCR은 공간속도 에 따라 온도별로 차이를 보였으나 fast SCR은 차이를 보이지 않았다. Fast SCR 반응을 고려한 탈질운전에서 공간속도 $10000h^{-1}$에서의 촉매부피와 비교하여 공간속도 $30000h^{-1}$으로 운전할 경우, NH3 SCR 촉매부피를 50% 이상 줄일 수 있음을 알 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권6호
• /
• pp.601-607
• /
• 2015

A set of novel silicon controlled rectifier (SCR) devices' characteristics have been analyzed and verified under the electrostatic discharge (ESD) stress. A ring-shaped diffusion was added to their anode or cathode in order to improve the holding voltage (Vh) of SCR structure by creating new current discharging path and decreasing the emitter injection efficiency (${\gamma}$) of parasitic Bipolar Junction Transistor (BJT). ESD current density distribution imitated by 2-dimensional (2D) TCAD simulation demonstrated that an additional current path exists in the proposed SCR. All the related devices were investigated and characterized based on transmission line pulse (TLP) test system in a standard $0.5-{\mu}m$ 24 V CDMOS process. The proposed SCR devices with ring-shaped anode (RASCR) and ring-shaped cathode (RCSCR) own higher Vh than that of Simple SCR (S_SCR). Especially, the Vh of RCSCR has been raised above 33 V. What's more, their holding current is kept over 800 mA, which makes it possible to design power clamp with SCR structure for on chip ESD protection and keep the protected chip away from latch-up risk.

• 공업화학
• /
• 제34권6호
• /
• pp.584-589
• /
• 2023

지지체 TiO₂가 다른 VOx/TiO₂ 촉매들에 대해 특성 분석과 SCR 반응을 수행하였다. Sigma Aldrich 사의 anatase TiO₂와 TiOCl₂와 TTIP를 출발 원료로 제조한 TiO₂를 사용하여 VOx/TiO₂ 촉매를 제조하고, 이를 각각 VS, VC, VP로 표시하였다. VS 시료의 비표면적은 VC 및 VP 시료 대비 1/10 이하로서 바나듐 산화물의 분산성은 상대적으로 낮았다. XPS 분석 결과, 촉매 표면의 흡착 산소의 비는 Ti³⁺가 존재하는 VS와 VP 시료가 VC 시료에 비해 높았다. 또한 VC와 VP시료에서 바나듐은 바나듐 산화물의 분산성과 관련하여 주로 V⁴⁺와 V³⁺ 상태로 존재하였다. 250 ℃ 이하 NH₃-SCR 활성에는 바나듐 산화물의 분산성보다는 흡착 산소 양이 더 기여한 반면, 300 ℃ 이상 활성에는 바나듐 산화물의 분산성이 더 기여하는 것으로 판단되었다. 촉매들의 fast SCR 활성은 3 시료 모두 NO₂/NOx = 0.5에서 가장 높았으며, VS < VC < VP 시료 순으로 나타났다. 빠른 NH₃-SCR 촉매 활성에는 촉매의 바나듐 산화물의 분산성이 영향을 크게 미친다고 판단되었다.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.98-104
• /
• 2011

The introduction of a diesel engine into the passenger car and light duty applications in the United States involves significant technical challenges for the automotive makers. This paper describes the SCR System optimization procedure for such a diesel engine application to meet Tier2 Bin5 emission regulation. A urea SCR system, a representative $NO_x$ reduction after-treatment technique, is applied to a 3.0 liter diesel engine. To achieve the maximum $NO_x$ reduction performance, the exhaust system layout was optimized using series of the computational fluid dynamics and the urea distribution uniformity test. Furthermore a comprehensive simulation model for the key factors influencing $NO_x$ reduction performance was developed and embedded in the Simulink/Matlab environment. This model was then applied to the urea SCR system and played a key role to shorten the time needed for SCR control parameter calibration. The potential of a urea SCR system for reducing diesel $NO_x$ emission is shown for FTP75 and US06 emission standard test cycle.

• 플랜트 저널
• /
• 제18권3호
• /
• pp.52-61
• /
• 2022

본 연구는 실제 운영중인 영동에코발전본부 1호기 125 MW 우드펠릿 발전소를 대상으로 탈질설비 운전조건이 NOx 발생량에 미치는 영향을 시험하였다. SNCR 요소 유량 증가에 따라 NOx 농도는 점차 감소하였으나 SCR 후단 암모니아 슬립은 상승하였다. 시험대상 보일러는 고온의 내부온도로 인해 SNCR 운영에 불리한 구조이며 노즐의 최적위치 검토가 필요할 것이다. SCR 희석공기 온도변화는 NOx 발생량에 영향을 미치지 않았다. SCR 암모니아 유량 증가는 SCR 후단 NOx 농도를 감소시켰고 NOx 제거효율도 증가시켰다. 다만 암모니아 슬립 자체 기준치를 초과하지 않는 암모니아 유량 111 kg/h가 최대 운전기준으로 추정된다. SCR 믹서 압력 상승은 NOx 농도를 감소시키고 제거효율도 최대로 측정되어 NOx 생성을 가장 효과적으로 억제하는 변수로 파악되었다.

• 한국분무공학회지
• /
• 제21권4호
• /
• pp.200-206
• /
• 2016

Recently, the certification procedure for exhaust emission regulation of LDV has tested with the NEDC mode in the laboratory. But the on-road exhaust emissions exceed the standard emission limits. Therefore, it is important to analyze the real-driving emissions (RDE) with a portable emissions measurement system (PEMS). In present study, the on-road emissions were measured with a PEMS and evaluated by moving averaging window (MAW) method. Also, it was compared with the $CO_2$ and $NO_x$ emissions for real-driving and test modes from euro-6 light-duty vehicles equipped with SCR and LNT systems. In results, on-road $NO_x$ emission has been 2.3-10.0 times higher than the standard $NO_x$ emission limit on NEDC mode. The reason was that the test modes did not reflect traffic and various real-driving patterns sufficiently.

• 대한기계학회논문집B
• /
• 제33권12호
• /
• pp.952-960
• /
• 2009

Selective Catalytic Reduction (SCR) system is a high-effective NOx reduction technology in diesel engines. As the emission standard of diesel engines is more stringent, vehicle manufactures makes efforts on emission technologies. This paper discusses the performance of Urea-SCR system according to the engine operating conditions in a passenger diesel engine. Engine test results in this paper show that it is important to consider the catalyst temperature and space velocity to obtain high NOx conversion efficiency. In condition of high catalyst temperature, over 90% NOx conversion efficiency is indicated. However, when catalyst temperature is low, NOx conversion efficiency was decreased. Also, it was shown that space velocity mainly effects on the DeNOx performance under 220 degree celsius of SCR catalyst temperature. As the urea injection pressure was decreased, NOx conversion efficiency was declined. It is concerned about urea droplet atomization. This work shown in this paper can lead to improved overall NOx conversion efficiency.

• 한국자동차공학회논문집
• /
• 제20권6호
• /
• pp.73-82
• /
• 2012

The main and side reactions of the three selective catalytic reduction (SCR) reactions with ammonia over a vanadium-based catalyst have been investigated using synthetic gas mixtures in the temperature range of $170{\sim}590^{\circ}C$. The three SCR reactions are standard SCR with pure NO, fast SCR with an equimolar mixture of NO and $NO_2$, and $NO_2$ SCR with pure $NO_2$. Vanadium based catalyst has no significant activity in NO oxidation to $NO_2$, while it has high activity for $NO_2$ decomposition at high temperatures. The selective catalytic oxidation of ammonia and the formation of nitrous oxide compete with the SCR reactions at the high temperatures. Water strongly inhibits the selective catalytic oxidation of ammonia and the formation of nitrous oxide, thus increasing the selectivity of the SCR reactions. However, the presence of water inhibits the SCR activity, most pronounced at low temperatures. In this study, the experimental results are analyzed by means of a dynamic one-dimensional isothermal heterogeneous plug-flow reactor (PFR) model according to the Eley-Rideal mechanism.

• 한국융합학회논문지
• /
• 제10권4호
• /
• pp.131-138
• /
• 2019

디젤엔진은 열효율이 높고 연비가 좋으며 CO, HC 및 $CO_2$의 배출량이 낮은 등 가솔린 엔진보다 상당한 장점이 있다. 그러나 디젤엔진은 배기가스 중에 $O_2$ 농도가 높기 때문에 NOx 저감이 어렵고, 삼원촉매를 적용하기 어렵다. Urea-SCR과 LNT는 디젤엔진에서 NOx를 연속적으로 저감하는데 활용 가능한 두 기술이다. 디자인 엔진에 Urea-SCR 시스템을 구현함으로써 2.5l 이상 엔진에서 Euro-6의 강화된 NOx 기준을 충족시킬 수 있게 되었다. 본 연구에서는 엔진 회전속도, 부하, 촉매 방식 및 $NH_3$/NOx 비율에 따른 NOx 저감 특성을 연구하여 NOx 저감을 극대화하는 조건을 제시하고자 한다. 또한 Euro-6 이상의 규제에 대응할 수 있도록 Urea-SCR에 대한 정밀한 실험 데이터를 제공하고자 한다.

• 대한기계학회논문집B
• /
• 제32권11호
• /
• pp.897-905
• /
• 2008

Selective catalytic reduction(SCR) is known as one of promising methods for reducing $NO_x$ emissions in diesel exhaust gases. $NO_x$ emissions react with ammonia in the catalyst surface of SCR system at working temperature of catalyst. In this study, to raise the reacting temperature when the exhaust gas temperature is too low, a heater is located at the bottom of SCR reactor. At an ambient temperature, ammonia is radially injected perpendicular to the exhaust gas flow at inlet pipe and uniformly mixed in the mixing area after being impinged against the wall. To predict the turbulent model inside the mixing area of SCR system, the standard ${\kappa}\;-\;{\varepsilon}$ model is applied. This work investigates numerically the effects of induced heat on the gaseous flow. The results show that the Taylor-$G{\ddot{o}}rtler$ type vortex is generated after the gaseous flow impinges the wall in which these vortices influence the temperature distribution. The addition of heat disturbs the flow structure in bottom area and then stretching flow occurs. Vorticity strand is also formed when heat is continuously increased. Constriction process takes place, however, when a further heat input over a critical temperature is increased and finally forms shed vortex which is disconnected from the vorticity strand. The strong vortex restricts the heat transport in the gaseous flow.