Abstract
This study tested the effect of de-NOx Facility operating condition on Nox emisiion in a 125 MW wood pellet power plant in Yeongdong Eco Power Plant Unit 1, which is in operation. As SNCR urea flow rate increased, NOx emission gradually decreased, but ammonia slip after SCR increased. The boiler under test has a structure that is unfavorable to SNCR operation due to the high internal temperature, and the optimum location of the nozzle will be required. SCR dilution air temperature change did not affect the amount of NOx generated. Increasing SCR ammonia flow reduced the NOx emission at SCR outlet and also increased the NOx removal efficiency. However, the ammonia flow rate of 111 kg/h, which does not exceed the ammonia slip its own reference limit, is estimated to be the maximum operating standard. The increase in SCR mixer pressure reduced NOx emission and the removal efficiency was also measured to be the most effective variable to inhibit NOx production.
본 연구는 실제 운영중인 영동에코발전본부 1호기 125 MW 우드펠릿 발전소를 대상으로 탈질설비 운전조건이 NOx 발생량에 미치는 영향을 시험하였다. SNCR 요소 유량 증가에 따라 NOx 농도는 점차 감소하였으나 SCR 후단 암모니아 슬립은 상승하였다. 시험대상 보일러는 고온의 내부온도로 인해 SNCR 운영에 불리한 구조이며 노즐의 최적위치 검토가 필요할 것이다. SCR 희석공기 온도변화는 NOx 발생량에 영향을 미치지 않았다. SCR 암모니아 유량 증가는 SCR 후단 NOx 농도를 감소시켰고 NOx 제거효율도 증가시켰다. 다만 암모니아 슬립 자체 기준치를 초과하지 않는 암모니아 유량 111 kg/h가 최대 운전기준으로 추정된다. SCR 믹서 압력 상승은 NOx 농도를 감소시키고 제거효율도 최대로 측정되어 NOx 생성을 가장 효과적으로 억제하는 변수로 파악되었다.