DOI QR코드

DOI QR Code

Cathode Side Engineering to Raise Holding Voltage of SCR in a 0.5-㎛ 24 V CDMOS Process

  • Wang, Yang (School of Physics and Optoelectronics, Xiangtan University) ;
  • Jin, Xiangliang (School of Physics and Optoelectronics, Xiangtan University) ;
  • Zhou, Acheng (School of Physics and Optoelectronics, Xiangtan University) ;
  • Yang, Liu (School of Physics and Optoelectronics, Xiangtan University)
  • Received : 2015.01.16
  • Accepted : 2015.09.06
  • Published : 2015.12.30

Abstract

A set of novel silicon controlled rectifier (SCR) devices' characteristics have been analyzed and verified under the electrostatic discharge (ESD) stress. A ring-shaped diffusion was added to their anode or cathode in order to improve the holding voltage (Vh) of SCR structure by creating new current discharging path and decreasing the emitter injection efficiency (${\gamma}$) of parasitic Bipolar Junction Transistor (BJT). ESD current density distribution imitated by 2-dimensional (2D) TCAD simulation demonstrated that an additional current path exists in the proposed SCR. All the related devices were investigated and characterized based on transmission line pulse (TLP) test system in a standard $0.5-{\mu}m$ 24 V CDMOS process. The proposed SCR devices with ring-shaped anode (RASCR) and ring-shaped cathode (RCSCR) own higher Vh than that of Simple SCR (S_SCR). Especially, the Vh of RCSCR has been raised above 33 V. What's more, their holding current is kept over 800 mA, which makes it possible to design power clamp with SCR structure for on chip ESD protection and keep the protected chip away from latch-up risk.

Keywords

References

  1. Chen, W. Y. : 'Overview of On-Chip Electrostatic Discharge protection design with SCR-Based devices in CMOS Integrated Circuits', IEEE Transactions on Device and Materials Reliability, 2005, 5, (2), pp. 235-249 https://doi.org/10.1109/TDMR.2005.846824
  2. Jang, S. L., and Li, S. H. : 'MOSFET triggering silicon controlled rectifiers for electrostatic discharge protection circuits', Solid State Electronics, 2001, 45, pp. 1799-1803 https://doi.org/10.1016/S0038-1101(01)00187-3
  3. Ker, M. D., and Hsu, K. C. : 'Substrate-Triggered SCR device for On-Chip ESD protection in fully silicided Sub-0.25-${\mu}m$ CMOS process', IEEE Transactions on Electron Devices, 2003, 50 (2), pp. 397-405 https://doi.org/10.1109/TED.2003.809028
  4. Zhou, A. C., Wang, Y., and Jin, X. L. : 'Impact of Layout Skill to Improve ESD Holding Voltage of SCR Embeded Diode Structure', Proc. Int. Conf. on EIEE, Changsha, China, June 2012, Vol. 1, pp. 220-223
  5. Chen, W. Y., Ker, M. D., and Jou , Y. N. : 'Source- Side engineering to increase holding voltage of LDMOS in a $0.5{\mu}m$ 16V BCD technology to avoid latch-up failure', Proc. Int. Conf. on IPFA, China, June 2009, Vol. 1, pp. 220-223
  6. Yang, L., Wang, Y., Zhou, A., and Jin, X. L. : 'Design, fabrication and test of novel LDMOSSCR for improving holding voltage', Solid-State Electronics, 2015, 103 (2015), pp. 122-126. https://doi.org/10.1016/j.sse.2014.08.007
  7. Ma, F., Zhang, B., Han, Y., Zheng, J., Song, B., Dong, S., Liang, H. : 'High Holding Voltage SCRLDMOS Stacking Structure With Ring-Resistance- Triggered Technique', IEEE Electron Device Letters, 2013, 34(9), pp. 1178-1180 https://doi.org/10.1109/LED.2013.2272591
  8. Liu, Z. W., Liu, J. J., and Vinson, J. E : 'Silicon- Controlled Rectifier (SCR) device for high-voltage electrostatic discharge (ESD) applications', US Patent 0212323 Al, August. 27, 2009
  9. Ryu, J. Y. , Kang, T. K.,and Shiheung , M. K.: 'Stacked SCR with high holding voltage', US Patent 7773356 B2, August. 10, 2010
  10. Ko, J. H., Kim, H. G., Jeon, J. S. : 'Gate bounded diode triggered high holding voltage SCR clamp for on-chip ESD protection in HV ICs', IEEE 35th Electrical Overstress/Electrostatic Discharge Symposium (EOS/ESD), 2013, pp. 1-8
  11. Dong, S. R., Jin, H., Miao, M., Wu, J., Liou, J. J. : 'Novel capacitance coupling complementary dualdirection SCR for high-voltage ESD', IEEE Electron Device Lett, 2012, 33, (5), pp.640-642 https://doi.org/10.1109/LED.2012.2188015