• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.52-57
• /
• 2006

This research was carried out to determine the effect of controlling nitrogen application on tiller development, yield, and quality of rice under scanty or excess seedling stands in direct-seeded rice on flooded soil surface. Seedling stand was set to 3 levels: scanty $(60/m^2)$, optimum $(120/m^2)$, and excess $(200/m^2)$. In the scanty plot, additional 4 kg/10a nitrogen was applied at the 3rd leaf stage to promote tiller development. On the other hand, applying 3.3 kg/10a nitrogen at 5th leaf stage in the excess plot was omitted to suppress tillering. Maximum numbers of tillers per plant were 15.2 and 8.6 in scanty and excess plots, respectively, as compared with 9.8 in optimum plot. Productive tiller rate decreased with the increase in number of seedling stands. Regardless of seedling density, the first tiller developed on the 3rd node of rice stem from the bottom. The primary tillers developed at 3, 4, 5, 6, 7 nodes in scanty plot, 3, 4, 5 nodes in optimum plot, and 3, 4 nodes in excess plot. The secondary tillers developed only in some portion of plants in scanty and optimum plots. The order of tiller emergence was negatively correlated to stem length, panicle length, non-productive tiller number, grain number per panicle, and fertility in scanty plot, and to perfect grain ratio in excess plot. In the optimum plot, however, the order of tiller emergence was not correlated to any of the mentioned characteristics. The perfect grain ratio of scanty plot was the highest because green-kerneled rice was a very small portion in the primary tillers as compared with those of optimum and excess plots. Yield indexes of scanty and excess plots were 99%, and 97%, respectively, of the yield (494 kg/10a) in optimum plot. In conclusion, when seedling stands are not at optimum level, rice yield and quality similar to optimum planting density level can be obtained by means of controlling nitrogen application.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.4
• /
• pp.351-356
• /
• 2009

Growth, milled rice yield and edible quality of rice in naturally reseeded Chinese milk vetch(CMV)-rice cropping system was compared with those in rice mono cropping on silty loam soil in Milyang from 2006-2008. Practicing natural reseeding technology recorded high CMV reseeding stand ranging from 565-805 plants $m^{-2}$ and resulting in the production of 13.0-17.0 kg N/10a from the CMV plant biomass which is greater than the recommendation rate of 9 kgN/10a. The plant height of rice plant grown in natural reseeding field is shorter at tillering stage but it was similar to the rice mono cropping at later stage. Dry matter production had similar trend to plant height. On the other hand, the leaf color in naturally reseeded CMV-rice cropping system was similar to the rice mono cropping up to panicle heading stage but it was high at mature stage, indicating that the nitrogen was provided by the CMV decomposition until later stage of rice. The yield components such as culm number $m^{-2}$ was greater and 1,000-brown rice weight was heavier than those of rice mono cropping but the ripened grain ratio was lower in naturally reseeded CMV-rice cropping system. Milled rice yield of naturally reseeded CMV-rice cropping system was similar to that of rice mono cropping. However, head rice percentage of milled rice was lower due to low ripened grain ratio. This result indicates that natural CMV reseeding technology can completely replace chemical fertilizer in CMV-rice cropping system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.2
• /
• pp.129-136
• /
• 1991

Dry matter productivity at silage stage of two corn hybrids varying resistance to rice blackstreaked dwarf virus(RBSDV) and two sorghum hybrids varying growth duration was evaluated at six planting dates (Apr. 1, Apr. 15, Apr. 29, May 13, May 27, and June 10) in Kyongsan where RBSDV is prevalent.Corn was harvested 38-40 days after silking. For sorghum 1st-cut was made 19-22 days after heading and some regrowth (2nd-cut) on October 13. 1. Percent stand of both corn hybrids was over 91% at all planting dates, but that of sorghum ranged 37.2-80.3% depending on hybrids and planting dates. 2. The number of days from planting to emergence decreased as planting date delayed in both crops. The number of days from emergence to silking of both corn hybrids and a sorghum hybrid(P 956) decreased as planting date delayed, but that of the other sorghum hybrid(P 931) increased significantly after May 13 planting. 3. RBSDV infection rate of corn hybrids was highest at April 1 planting (Kwanganok 24.896, Jinjuok 63.0%) and decreased up to April 29 planting and then increased as planting date delayed. Sorghum was not infected by RBSDV at all. 4. EarfTotal dry matter ratio of corn ranged 30.6-47.9% and that of sorghum 3.1-30.7% depending on hybrids and planting dates. All the hybrids developed grain normally at all planting dates except a sorghum hybrid (P 931) which developed few grains after May 13 planting. 5. Crude (C) protein and C. fat contents were similar among all treatments. C. fiber content of P 931 was higher than that of both corn hybrids and P 956, but nitrogen free extract (NFE) was lower. C. fiber and NFE of both corn hybrids and 1st-cut sorghum were similar among the planting dates, but C. fiber and NFE of 2nd-cut of sorghum decreased and C. protein increased as planting date delayed due to plants were younger. 6. Dry matter (DM) yield of all hybrids decreased as planting date delayed except Jinjuok of which yield was highest at April 29 planting. DM yield of corn was similar to 1st-cut sorghum, but lower than total DM yield of sorghum at April 1 and 15 plantings where regrowth yield was high.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.spc1
• /
• pp.123-144
• /
• 1996

This review deals briefly with the various medicinal components(mainly saikosaponins), their biological activities and the variation of their contents by different cultivation environment and plant parts in Bupleurum species. Bupleuri radix, a crude drug, is the root of Bupleurum falcatum L. (Korea, Japan), B. chinense(China), and their related species (Umbelliferae). There are over 120 species in Bupleurum genus throughout world, mainly Asian area, and over 5 species in Korea, investigated up to now. These plants contain many physiological active compounds and the principal components are saikosaponins. Major activities of this crude drug and saikosaponins are the anti-inflammatory and antihepatotoxic activities. Saikosaponins and their derivatives in Bupleurum spp. have been chemically studied, isolated and identified over 70 compounds in over 50 species. Other components, physiologically active ones, also have been investigated, which are the groups of lignan, flavonoid, essential oil, polyacetylene, polysaccharide, etc. Saikosaponins belong to the group of triterpenoid saponin chemotaxonomically and occur the accumulation and turnover in plant tissues through secondary metabolism, mevalonic acid pathway. The contents and kinds of saikosaponins and other components in Bupleurum spp. plants are various due to different species and growing environments, as the plant growth characters and yield are various. Most of medicinal plants as well as Bupleurum species are very useful as agricultural products and traditional medicines, and also are very valuable as genetic resources and natural products. So we need to collect, evaluate, preserve, and utilize various medicinal plants, and also to under-stand secondary metabolism and improve the breeding and cultivation techniques for the safe production of crude drugs with high quality and yielding.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2541-2547
• /
• 2010

In this paper, we propose a design technique which replaces logic transistors of 1.2V with medium-voltage transistors of 3.3V having small off-leakage current in repetitive block circuits where speed is not an issue, to implement a low-power eFuse OTP memory IP in the stand-by state. In addition, we use dual-port eFuse cells reducing operational current dissipation by reducing capacitances parasitic to RWL (Read word-line) and BL (Bit-line) in the read mode. Furthermore, we propose an equivalent circuit for simulating program power injected to an eFuse from a program voltage. The layout size of the designed 512-bit eFuse OTP memory IP with a 90nm CMOS image sensor process is $342{\mu}m{\times}236{\mu}m$. It is confirmed by measurement experiments on 42 samples with a program voltage of 5V that we get a good result having 97.6 percent of program yield. Also, the minimal operational supply voltage is measured well to be 0.9V.

• Journal of Biosystems Engineering
• /
• v.28 no.5
• /
• pp.411-420
• /
• 2003

Physical and cultural properties were investigated on the rice-seed pellets made by the pelleting machine(Yu, 2003) as the changes with mixing ratios of soil to rice seed of 6 : 1, 7 : 1, and 8 : I, and rotating speeds of forming rolls of 7, 10, and 13 rpm. Average weight, average diameter, and average sphericity of the pellets were 1.70 g, 12.0 ㎜, and 99.1 ％, respectively. Average number of seeds per pellet was more than 3, and almost all pellets had more than 3 seeds in the cases of mixing ratios of 6 : 1, and 7 : 1 at the forming rolls' speed of 7 rpm. Gradual drying was needed because rapid drying caused cracks on surface of the pellets. Compression strength of the pellets dried in shady room was in the range of 132 ∼ 152 N, which was enough for handling. Comparing with the previous pellets(Park, 2002), average number of seeds per pellet, ratio of pellets including more than 3 seeds, and compression strength increased due to the effects of pressure feed of pellet materials, and improvements of the forming rolls. Emergence ratio of the pellets made at the mixing ratio of 6 : 1 and the forming rolls' speed of 7 rpm, was 100 % on dry paddy and was 97 % on flooded paddy surface. Good growth characteristics, and yield except number of seedling stand and ratio of missing plant were shown in planting of the pellets made at the mixing ratio of 7 : 1 and the forming rolls' speed of 7 rpm on flooded paddy surface field. Considering the cultural results, the mixing ratio of 6 : 1, and the forming rolls' speed of 7 rpm seems to be optimum operating condition for the improved pelleting machine.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.6
• /
• pp.445-449
• /
• 2009

According to the statistical data, stroke is about 13.9% of leading causes of death. Some herbal medicines including Paeonia lactiflora, Angelica gigas nakai and Prunus persica, etc., had been reported to be effective in preventing stroke and mBHT (Modified BoyangHwanoTang) was an advanced prescription used in Korean clinics. Orally disintegrating tablets (ODT) is useful for patients suffering from dysphagia, motion sickness, repeated emesis and mental disorders. Further, drugs exhibiting satisfactory absorption through the mucosa intended for immediate pharmacological action could be advantageously formulated in ODT. The aim of this study was to develop the most efficient ODT formulation of mBHT. Corresponding herbal medicines comprising mBHT were extracted with water for 3 hr at 95~$100{^{\circ}C}$ and then dried. mBHT extract was obtained with about 30% of yield. Subsequently, some pharmaceutical excipients such as spray-dried lactose, crospovidone, glyceryl behenate and/or cogrinded-treated arabia gum were used to achieve an immediate disintegration of mBHT ODT in oral cavity. The requirements of ODT with mechanical strength sufficient to stand the rigors of handling and capability of disintegrating within a few seconds in contact with saliva are indispensable. mBHT ODT prepared by the wet granulation method showed a disintegration time of below 30 sec.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.63-69
• /
• 2010

The pre-heat free consumables for GMAW, SAW and FCAW processes that matche with the Cu-bearing PFS-700 steel which has yield strength over 700MPa were developed and evaluated to see the suitability in military such as submarine and battle ship. Explosion Bulge Test underwater was developed and applied to see the reliability of welded structure. All welding was conducted without pre-heat before welding, the interpass temperature was below $150^{\circ}C$ for all welding conditions. Tensile strength for the weld metal in GMAW, SAW and FCAW process is 887MPa, 875MPa and 813MPa, respectively, these values are similar to the base metal of PFS-700 steel of 838MPa. EBT results in GMAW, SAW and FCAW show 14.0%, 14.02% and 15.9% reduction of thickness without generation of crack, respectively and stand-off distance was set up properly to have over 14.0% reduction of thickness. Through EBT results, the developed new consumables are applicable to the weapon systems such as submarine and battle ship.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.3-10
• /
• 1981

In order to analyze growth and yield of rice population at the stand point of productive ecology, productive structure and growth rate of rice plants and effects of their related factors were studied. The results obtained were summarized as follows: 1. High crop growth rate was maintained throughout growing season when rice plants grew in population compared to a single rice plant. Since crop growth rate in rice stands were also higher at ripening stage, higher yields were obtained. 2. Higher crop growth rate of rice plants in population was maintained by the increase of leaf area rather than by net assimilation rate. 3. As the overgrowth of upper leaves of plant population in some rice varieties transmission of light into lower leaves was inhibited and thus most of them were eventually died before flowering. 4. In the case of rice population, the ratio of productive organ to non-productive organ, light transmission rate and nitrogen contents of active leaf blade were lower than individual rice plants under isolated condition.

• Tunnel and Underground Space
• /
• v.21 no.3
• /
• pp.192-204
• /
• 2011

In this study, 3-D analyses were conducted while taking every construction stage into account. Then 2-D analyses were conducted which yield the same results with the 3-D results. The crown settlement normalized by the ultimate value was compared during the process to overcome the discrepancy caused by different dimensions. When a bench or a core is left uncut to give extra support to the face and eventually the whole excavation boundary, this extra supporting effect also has to be included in the analysis. In this study, this effect is also implemented in terms of the load distribution factor. When the length of the bench is very short compared to the diameter of the tunnel in such cases as in short bench cut or in mini-bench cut, the supporting effect of the face does not disappear even after the bench is completely excavated and supported since the face is still too close to the point of interest. The 4th load distribution factor was defined to stand for the advance of the face after the completion of the excavation cycle. The 4th load distribution factor turned out to be very useful in determining the load distribution factors when a tunnel is excavated by bench cut with various bench lengths under different initial conditions.