• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.25-30
• /
• 2011

In this paper, we analyzed the electrical characteristics with Micro-cracks in Photovoltaic module. Micro cracks are increasing the breakage risk over the whole value chine from the wafer to the finished module, because the wafer or cell is exposed to mechanical stress. And The solar cells have to with stand the stress under out door operation in the finished module. Here the mechanical stress is induced by temperature changes and mechanical loads from wind and snow. So, we experimentally analyze the direct impact of micro-cracks on the module power and the consequences after artificial aging. The first step, we made micro-cracks in PV module by mechanical load test according to IEC 61215. Next, PV modules applied the thermal cycling test, because micro-cracks accelerated aging by thermal cycling test, according to IEC61215. Before every test, we checked output and EL image of PV module. As the result of first step, we detected little power loss(0.9%). But after thermal cycling test increased power loss about 3.2%.

• 한국정보통신학회논문지
• /
• 제5권2호
• /
• pp.309-313
• /
• 2001

본 논문에서는 Custom Power 응용을 위한 전압 안정화 특성을 갖는 다기능 3상 전자식 강압형 변압기가 제안된다. 제안된 전자식 변압기는 다음과 같은 특징을 갖는다. 1) 무게가 1㎾ 기준 일반 변압기의 40% 수준이다. 2) PWM 제어에 의하여 입력전압의 변동에 무관한 출력전압을 유지하는 전압 안정화 기능을 갖는다 3) 전원 또는 부하단의 Emergency에 대하여 회로 차단기의 기능도 갖는다. 4) 부하에 최초 전원 공급시, 낮은 전압으로부터 점진적으로 증가시켜가면서 전원을 인가하여, 전원 투입시 발생할 수 있는 돌입전류나 과도 충격을 제거할 수 있다. 그 밖에 무부하시 전원차단 기능과, 왜곡된 입력전압에 대한 보상기능을 추가 할 수 있다. 본 논문에서는 제안된 강압형 전자식 변압기의 회로 구성과 특징을 설명하고, 이를 PSPICE 시뮬레이션을 통하여 동작특성을 보인다.

• 대한기계학회논문집B
• /
• 제20권3호
• /
• pp.1106-1113
• /
• 1996

The phase criterion of the feedback cycle of low-speed edgetones has been obtained using the jet-edge interaction model which is based on the substitution of an array of dipoles for the reaction of the wedge to the impinging jet. The edgetone is produced by the feedback loop between the downstream-convected sinuous disturbance and upstream-propagating waves generated by the impingement of the disturbance on the wedge. By estimation of the phase difference between the downstream and the upstream disturbances, the relationship between the edge distance and the wavelength is obtained according to the phase-locking condition at the nozzle lip. With a little variation depending on the characteristics of jet-edge interaction, the criterion can be approximated as follows: h/.LAMBDA. + h/.lambda. = n - 1/4, where h is the stand-off distance between the nozzle lip and the edge tip, .LAMBDA. is the wavelength of downstream-convected wave, .lambda. is the wavelength of the upstream-propagating acoustic wave and n is the stage number for the ladder-like characteristics of frequency. The present criterion has been confirmed by estimating wavelengths from available experimental data and investigating their appropriateness. The above criterion has been found to be effective up to 90.deg. of wedge angle corresponding to the cavitytones.

• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.121-131
• /
• 2004

Transportation and logistics of agricultural products have been one of the major interests of many researches. Most of researches have been limited to presuming these as a first dimensional process or considering only economic value of agricultural products at each stage of logistics. However, the particular characteristics of agricultural products, such as quality change during transportation or extensively scattered origins, require examining these problems as a whole system. Network model has been adopted to represent nodes, which stand for spatial location of demand and supply of agricultural products, and communication between these nodes. Based on network theory and advanced marketing potential function, an optimal routes selection model is developed. The model employed network simplex method for routes optimization. The application of the model focused on transportation network organization to reflect different market prices for different locations and resulted in optimum routes and profit improvement of the applied agricultural product.

• 드라이브 ㆍ 컨트롤
• /
• 제13권2호
• /
• pp.26-33
• /
• 2016

This paper describes of a mathematical and real experimental analysis for a walking robot which uses servo valve driven hydraulic actuator. Recently, many researchers are developing a walking robot based on hydraulic systems for the difficult and dangerous missions such as walking in the rough terrain and carrying a heavy load. In order to design and control a walking robot, the characteristics of the hydraulic actuators in the joint through the view point of walking such as controllability and backdrivability must be analyzed. A general mathematical model was used for analysis and proceeds to position and pressure changes characteristic of the input and backdrivability experiment. The result shows the actuator is a velocity source, had a high impedance, the output stiffness is high in contact with the rigid external force. So stand above the controller and instruments that complement the design characteristics can be seen the need to apply a hydraulic actuator in walking robot.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.437-441
• /
• 2008

A non-toxic Post Boost Stage(PBS) with LOX/Ethanol engine was successfully demonstrated at the Tomioka Facility of IHI Aerospace. IHI Aerospace has researched and developed the nontoxic propulsion systems and the LOX/Ethanol is one of the most attractive non-toxic bipropellant candidates. ${\rho}ISP$ of LOX/Ethanol is higher than ${\rho}ISP$ of the other non-toxic bipropellants as LOX/HC or $LOX/LH_2$. The authors studied the combustion characteristics of LOX/Ethanol propellant with the engine designed for LOX/LNG propellant. Also the injector with a built-in igniter was designed and examined its feasibility, ignition and combustion characteristics. We have demonstrated Post Boost Stage with future LOX/Ethanol engines. This propulsion system is targeted for expandable vehicle upper stage to accelerate delta-V to reach the required orbit. PBS Demonstration Model is designed as a test stand to evaluate feed system for integrated propulsion system and also to demonstrate Integrated Vehicle Health Management(IVHM) technique using local valve control and also valve behavior-monitoring capability.

• 한국의상디자인학회지
• /
• 제23권2호
• /
• pp.155-163
• /
• 2021

This design proposal research is meaningful as Jogakbo can retain the traditional value of the it's design as it becomes a contemporary design proposal. As a specific method of research, history was been investigated to find meaning and formative characteristics defined through prior research under the theme of Jogakbo. Ideas, such as silhouettes, details for design, and the making domestic and foreign designer examples were obtained. The fabric used for the works were recycled from past leather works. All materials are sheep skin. There were various processed surfaces used to avoid monotony. Jogakbo's cotton composition focused on free and radial patterns. The pattern was manufactured using a flat and 3D combination, and the selection of items was mainly made with a simple and light silhouette, so that Jogakbo's details, such as dresses, slip dress, and vests could stand out. Color is an important factor in Jogakbo. However, traditions which are relics of the times, do not need to be preserved in their original form. If changes are inherited with reasonable grounds and directions in line with the changing times, the significance and values are retained are sufficient. It is hoped that these design development studies will continue in the future so that our precious cultural heritage can continue to change and develop positively.

• 대순사상논총
• /
• 제25_1집
• /
• pp.87-119
• /
• 2015

Typology of religious organization is a useful analysis from the stand point of sociology of region. A study on the change of type of religious organization according to typology is a academic responsibility. This study can also make a religion prepare theoretical shape for the future of the religion. Although Daesoonjinrihoe now becomes a established sect, Daesoonjinrihoe should retain characteristics as a alternative sect. This feature as a alternative sect is an important identity of Daesoonjinrihoe which was established to criticize and overcome established sect. Dotongjingyeong is an ideal world of Daesoonjinrihoe. The foundation of Dotongjingyeong as an ideal world is essential value and reason of existence of Daesoonjinrihoe. For this reason, Daesoon jinrihoe should not just maintain its position but lead to reach the Dotongjingyeong here and now. Dotongjingyeong which should be built here and now is beyond Daesoonjinrihoe as a religious organization, because Dotongjingyeong is new heaven and new earth. Daesoonjinrihoe should put an guard against trial and error through change of type. Otherwise, Daesoonjinrihoe can not retain characteristics as an alternative sector. Now Daesoonjinrihoe may be at a revolutionary turning point for the foundation of Dotongjingyeong.

• 무역학회지
• /
• 제46권6호
• /
• pp.39-54
• /
• 2021

This study comprehensively reviews the research conducted until recently in order to derive realistic alternatives in consideration of local industries. The case analysis was performed on a competitive port of similar size, and strategies and revitalization measures were suggested in consideration of the conditions of Gunsan Port. Literature review focused on papers and major reports. The case of similar size were analyzed for Daesan port, Boryeong port, and Mokpo port. In order to find strategies to revitalize the regional port logistics industry behind Gunsan Port, the recent opportunities and threat factors of Gunsan Port were derived. In order to foster the regional port logistics industry with Gunsan Port as its main base, this study proposes a three-step development strategy. It is necessary to increase the effectiveness of the public-private joint port sales and maintain the incentive system, but use it as a means to strengthen the competitiveness of Gunsan Port. Since the possibility of opening various routes is not high due to the conditions of Gunsan Port, various business models can be devised to link the currently opened routes. Start-up in the logistics field can stand out if they provide predictive data or provide consulting services by securing and analyzing logistics data, not directly providing logistics services.

• 한국컴퓨터산업학회논문지
• /
• 제6권5호
• /
• pp.757-766
• /
• 2005

There have been great demands for higher density SRAM in all area of SRAM applications, such as mobile, network, cache, and embedded applications. Therefore, aggressive shrinkage of 6T Full CMOS SRAM had been continued as the technology advances, However, conventional 6T Full CMOS SRAM has a basic limitation in the cell size because it needs 6 transistors on a silicon substrate compared to 1 transistor in a DRAM cell. The typical cell area of 6T Full CMOS SRAM is $70{\sim}90F^{2}$, which is too large compared to $8{\sim}9F^{2}$ of DRAM cell. With 80nm design rule using 193nm ArF lithography, the maximum density is 72M bits at the most. Therefore, pseudo SRAM or 1T SRAM, whose memory cell is the same as DRAM cell, is being adopted for the solution of the high density SRAM applications more than 64M bits. However, the refresh time limits not only the maximum operation temperature but also nearly all critical electrical characteristics of the products such as stand_by current and random access time. In order to overcome both the size penalty of the conventional 6T Full CMOS SRAM cell and the poor characteristics of the TFT load cell, we have developed $S^{3}$ cell. The Load pMOS and the Pass nMOS on ILD have nearly single crystal silicon channel according to the TEM and electron diffraction pattern analysis. In this study, we present $S^{3}$ SRAM cell technology with 100nm design rule in further detail, including the process integration and the basic characteristics of stacked single crystal silicon TFT.