• 센서학회지
• /
• 제6권1호
• /
• pp.63-71
• /
• 1997

ZnS:Mn/$ZnS:TbF_{3}$적층구조의 TFEL(thin-film eletroluminescent)소자를 제작하였으며, 이때 절연층으로 (Pb,La)$TiO_{3}$(이하PLT)와 $SiO_{2}$박막을 이용하였다. TFEL소자는 $78V_{rms}$의 문턱전압과 $100V_{rms}$의 인가전압에서 $400{\mu}W/cm^{2}$의 휘도를 나타내었다. TFEL소자의 발광스펙트럼은 450nm에서 630nm사이의 파장대를 보이고 있다. 제작된 TFEL소자는 컬러필터를 병용함으로서, 적 녹 청의 색상을 구현하는 TFEL소자로 활용할 수 있다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권1호
• /
• pp.4-7
• /
• 2012

Coated conductors have been developed to increase piece length and critical current for electric power applications. Otherwise, Many efforts were carried out to reduce AC loss of coated conductor for AC applications. Twisting and cabling processes are effective to reduce AC loss but, these processes can not be applied for tape shaped coated conductor. It is inevitable to have thin rectangular shape because coated conductor is fabricated by thin film deposition process on metal substrate. In this study, round shape superconducting wire was first fabricated using coated conductors. First of all, Ag coated conductor was used. coated conductor was slitted to several wires with narrow width below 1mm. 12ea slitted wires were parallel stacked on top of another until making up the square cross-section. The bundle of coated conductors was heat treated to stick on each other by diffusion bonding and then copper plated to make round shape wire. Critical current of round wire was measured 185A at 77K, self field.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.9-12
• /
• 1998

Film characteristics of thin reoxidized nitrided oxides were investigated by SIMS analysis and C-V method in order to use the gate dielectric for charge-trap type NVSMs instead of ONO stacked layers. Nitric oxide(NO) annealed film has the nitrogen content sharply peaked at the Si-SiO$_2$ interface, while it is broad for nitrous oxide($N_2$O) ambient. The nitrogen peak concentration increased with anneal temperature and time. The position of nitrogen content in the oxide layer was due to be precisely controlled. For the films annealed NO ambient at 80$0^{\circ}C$ for 30min. followed by reoxidized at 85$0^{\circ}C$, the maximum memory window of 3.5V was obtained and the program condition was +12V, 1msec for write and -l3V, 1msec for erase.

• 대한기계학회논문집B
• /
• 제39권5호
• /
• pp.463-469
• /
• 2015

산화그래핀 소재를 합성하여 투명한 박막 코팅기술을 개발하고 특성을 평가하였다. 스핀과 스프레이 공정을 동시에 이용하여 산화그래핀을 유리 기판에 균일하게 박막코팅을 하였다. 균일하게 산화그래핀을 스핀-스프레이 공정을 이용하여 박막코팅을 하기 위하여 유리기판을 amine-functional group으로 표면개질을 하였다. 또한, 스핀-스프레이 공정을 이용하여 산화그래핀 박막을 4층까지 적층을 하였고 86% 이상의 투명도를 확보하였다. 이와 같은 합성된 산화그래핀 박막소재의 스핀-스프레이 코팅 기술은 다양한 전자제품들의 display를 대면적으로 코팅할 수 있을 것으로 기대되어진다.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.189-193
• /
• 2001

TiN을 불소의 확산 방지막으로 사용한 W-TiN 복층 게이트 소자의 물리적.전기적 특성 변화를 살펴보았다. TiN 스퍼터링 증착시 $N_2$/Ar 가스 비율이 증가할수록 TiN 박막은 N-과다막이 되어 비저항이 증가하였으나, W-TiN복층 구조에서는 $N_2$/Ar가스 비율이 증가할수록 상부 텅스텐 박막의 결정화가 증가하여 비저항이 감소하였다. 한편, 같은 $N_2$/Ar 비율의 경우, TiN 박막 열처리 온도 변화(600~$800^{\circ}C$)에 무관하게 W(110) 방향으로 우선 배향된 결정 구조를 보였다. 누설 전류 특성은 TiN증착시 $N_2$/Ar 비율 변화에 무관하게 우수하였으며, TiN을 확산 방지막으로 사용함으로서 순수 텅스텐 전극만을 적용시 나타나는 초기 저전계 누설 특성을 향상시킬 수 있음을 확인하였다.

• 한국진공학회지
• /
• 제19권5호
• /
• pp.341-346
• /
• 2010

본 논문에서는 반응성 스퍼터링(Reactive Sputtering) 공정으로 $Si_xO_y$ 박막과 $Si_xN_y$ 박막을 4층 구조로 적층하고 400~700 [nm]의 가시광 영역에서 빛의 반사를 줄이기 위한 반사방지 코팅(Anti-Reflection Coating)으로의 응용 가능성을 조사하였다. 스퍼터링 타겟으로 6 [inch] 직경의 Si 단결정을 사용하였고, 반응성 스퍼터링 가스는 $Si_xO_y$ 박막 증착에서 Ar과 $O_2$를, $Si_xN_y$ 박막 증착에서는 Ar과 $N_2$를 사용하였으며, 스퍼터링 파워로는 DC pulse를 사용하였다. 1,900 [W] DC pulse power에서 Ar:$O_2$=70:13 [sccm]의 반응성 스퍼터링으로 2.3 [nm/sec]의 증착률과 1.50의 굴절률을 보이는 $Si_xO_y$ 박막을 제작하였고, Ar:$N_2$=70:15 [sccm]의 반응성 스퍼터링으로 1.8 [nm/sec]의 증착률과 1.94의 굴절률을 보이는 $Si_xN_y$ 박막을 제작하였다. 이 두 종류의 박막을 이용해서 시뮬레이션을 통해 4층 구조의 반사방지 코팅 구조를 설계한 후, 설계결과에 따라 각 박막의 두께를 순차적으로 변화시켜 증착하였다. 4층 구조 $Si_xO_y-Si_xN_y$의 반사도 측정 결과 550 [nm] 대역에서 1.7 [%]의 반사와 400 [nm]와 650 [nm] 영역에서 1 [%]의 반사를 보였으며, 가시광 영역에서 성공적인 "W" 형태의 반사방지 코팅 특성을 보였다.

• 전자공학회논문지A
• /
• 제29A권9호
• /
• pp.20-28
• /
• 1992

Dielectric thin film of N/O ($Si_{3]N_{4}/SiO_{2}$) for high density stacked dynamic-RAM cell was formed by LPCVD and oxidation(dry & pyrogenic oxidation methods) of the top 7nm $Si_{3]N_{4}$ film. The thickness, structure and composition of this film were measured by ellipsometer, high resolution TEM, AES and SIMS. The insulating characteristics(I-V characteristics) were investigated by HP 4145, and the characteristics of TDDB (Time Dependent Dielectric Breakdown) were evaluated by using CCST(Current Constant Stress Time) method. In this experiment, The optimum oxidation condition for preparation of good insulating and TDDB characteristics of N/O film was pyrogenic oxidation at 85$0^{\circ}C$ for 30 minutes. The leakage current was reduced from 400pA to 7.5pA when SiO$_{2}$ film with thickness of 2nm was formed on the top of $Si_{3]N_{4}$ film by the pyrogenic oxidation method.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.7-11
• /
• 2015

In this study, $Si_3N_4$/SnZnO/AZO/Ag/Ti/ITO multi-layer film were prepared on glass substrate by DC/RF magnetron sputtering method. To prevent interfacial reaction between Ag and ITO layer, Ti buffer layer was inserted. Optical properties and sheet resistance were studied depending on laminating times of each multi-layered film especially in visible ray. The simulation program, EMP (essential macleod program), was adopted and compared with experimental data to expect the experimental result. It was found out that the transmittance of the first stacked $Si_3N_4$/SnZnO/AZO/Ag/Ti/ITO multi-layer film was more than 90%. However, with increasing stacking times, the optical properties of $Si_3N_4$/SnZnO/AZO/Ag/Ti/ITO multi-layer film get worse. Consequently, Ti layer is good for oxidation barrier, but too many uses of this layer may have an adverse effect to optical properties of TCO film.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.109-112
• /
• 1995

CuInS$_2$thin film was prepared by heat treatment at vacuum 10$\^$-3/ Torr of S/In/Cu stacked layer which was deposited by sequential. And so, the polycrystalline CuInS$_2$with chalcopyrite structure was well made at heat treatment temperature of 250$^{\circ}C$ and heat treatment time of 60 min. Single phase of CuInS$_2$was formed from Cu/In composition ratio of 0.84 to 1.3. p conduction type of CuInS$_2$thin film was appeared from Cu/In competition ratio of 0.99. The highest resistivity of CuInS$_2$with p type was 1.608${\times}$10$^2$$\Omega$cm at Cu/In composition ratio of 0.99 and The lowest resistivity was 5.587${\times}$10$\^$-2/$\Omega$cm at Cu/In composition ratio of 1.3.

• Current Photovoltaic Research
• /
• 제4권1호
• /
• pp.16-20
• /
• 2016

$Cu_2ZnSnS_4$ (CZTS) thin films were fabricated by successive electrodeposition of layers of precursor elements followed by sulfurization of an electrodeposited Cu-Zn-Sn precursor. In order to improve quality of the CZTS films, we tried to optimize the deposition condition of absorber layers. In particular, I have conducted optimization experiments by changing the Cu-layer deposition time. The CZTS absorber layers were synthesized by different Cu-layer conditions ranging from 10 to 16 minutes. The sulfurization of Cu/Sn/Zn stacked metallic precursor thin films has been conducted in a graphite box using rapid thermal annealing (RTA). The structural, morphological, compositional, and optical properties of CZTS thin films were investigated using X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and X-ray Flourescenece Spectrometry (XRF). Especially, the CZTS TFSCs exhibits the best power conversion efficiency of 4.62% with $V_{oc}$ of 570 mV, $J_{sc}$ of $18.15mA/cm^2$ and FF of 45%. As the time of deposition of the Cu-layer to increasing, the properties were confirmed to be systematically changed. And we have been discussed in detail below.