• 해양환경안전학회지
• /
• 제4권2호
• /
• pp.53-62
• /
• 1998

International Maritime Organizatin(IMO) has been chosen some of agreements for regulating the international stability criteria of fishing vessels and recommended that each goverment adopts theirs into the domestic law. As a result, 77/93 Fishing Safety Agreement was ratified. Among the above agreement, contents of stability was not only applied to domestic law, but also strenghten considerably compared with existing stability criteria. And even if the calculation guide of stability with recommendations was regualted, Analysis of stability on domestic fishing vessels never have been used according to such a caculation method. Moreover, the caculation of stability criteria caused by strong wind, rolling effect and deck inflow was not considered in the existing basic design program. Therefore, the development of stability criteria program available for such a caculation has been of vital impotance. This research has developed a stability criteria program under 77/93 Fishing Safety Agreement. Also through development of stability criteria program, the stability performance of fishing vessel with 69ton stow-nesting was evaluated.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 봄 학술발표회 논문집
• /
• pp.17-34
• /
• 1997

• 한국생활과학회지
• /
• 제19권1호
• /
• pp.127-136
• /
• 2010

This research subdivided the groups of baby clothes purchasers by consumer value factors in order to study clothing behavior by the value group of baby clothes purchasers and to examine differences in shopping propensity, pursuit benefits, evaluation criteria, and utilization of information sources depending on the value groups 1. A total of three factors - the pursuit of a stable life, the pursuit of achievement, and the pursuit of pleasure - were derived by conducting a factor analysis on the value dimensions of baby clothes purchasers. The value types of baby clothes purchasers were classified into three groups - the group of the pursuit of achievement, the group of the pursuit of stability and pleasure, and the passive group as the result of conducting cluster analysis on the basis of three types of personal value factors. 2. In the difference of shopping propensity by the value group, the group of the pursuit of achievement and the group of the pursuit of stability and pleasure were found to be the group having economical shopping propensity. In the difference of pursuit benefits by the value group, the passive group appeared to be the group in pursuit of fashion, and it could be seen that the group of the pursuit of achievement and the group of the pursuit of stability and pleasure were highly interested in the pursuit of individuality and practicality. 3. In the evaluation criteria of clothes by the value group of baby clothes purchasers, the group of the pursuit of achievement was found to consider physical criteria as important evaluation criteria, and the group of the pursuit of stability and pleasure was found to consider aesthetic criteria as important evaluation criteria. In the utilization of information sources by the value group of baby clothes purchasers, the passive group was found to be influenced most by market-oriented information sources.

• 지질공학
• /
• 제11권2호
• /
• pp.153-161
• /
• 2001

암반사면의 안정성 평가에 있어서 경험적 평가에 중점을 둔 RMR분류법과 여러 가지 변수들을 이용한 평가방법인 평사투영·한계평형·유한차분·개별요소해석을 실시하였다. 그리고 여러 가지 암반사면의 안정성에 영향을 미치는 변수들의 불확실성을 고려할 수 있는 점추정법에 의한 신뢰성해석과 더불어 퍼지언어를 이용한 퍼지근사추론법의 구조화에 따른 평가방법을 비교·분석 하였다. 그 결과 점추정법의 신뢰성해석을 전 구간의 안정성을 평가 할 수 있으며 퍼지근사추론법에 의한 안정성평가는 다른 기존의 안정성해석 결과와 전반적으로 일치함을 알 수 있다. 이와 같이 RMR분류·평사투영·한계평형·유한차분·개별요소해석과 점추정법의 신뢰성해석, 퍼지근사추론법을 병행하면 암반사면의 특수성을 체계적이고 종합적으로 평가할 수 있다.

• 생약학회지
• /
• 제45권2호
• /
• pp.135-140
• /
• 2014

A simple and reliable reverse phase HPLC method was developed to determine pharmacologically active marker compounds of Epimedii Herba, Atractylodis Rhizoma Alba, and Polygalae Radix. The stability test of water-extracts of the three natural medicines has been evaluated for six months. However, no significant changes in the content of the marker compounds of each extract were observed during the time of investigation.

• 치위생과학회지
• /
• 제22권3호
• /
• pp.139-147
• /
• 2022

Background: Temporary crown resins are used prior to prosthesis placement, indicating the importance of aesthetics. The aim of this study was evaluate the color stability of various staining solutions according to the color of temporary crown resins using VITA Easyshade^Ⓡ V. Methods: The temporary crowns used were the powder-liquid type and included four shades. A total of 36 specimens were fabricated in the form of disks with a diameter of 1.8 mm and a depth of 2 mm. They were divided into four groups of nine each, and staining was performed for seven days by precipitation in 3 mL of three staining solutions composed of distilled water, black coffee, and red wine. Color and color stability evaluations were performed by a trained examiner using a digital spectrophotometer (VITA Easyshade^Ⓡ V). Color stability was analyzed using the ΔE value. Results: Because of the color stability evaluation using the ΔE value, the difference between three and seven days was significant in the specimen I and III groups (p<0.05). Further, post hoc analysis showed that the ΔE value of red wine was significant, indicating that the color stability in red wine was low. The ΔE values in group II between days three and seven were statistically significant (p<0.05). Post hoc analysis showed that distilled water, coffee, and wine had the highest ΔE values on day three. On day seven, the ΔE value for wine was significant, and the color stability was low. There was no significant difference in group IV according to the staining period and staining solution; therefore, color stability was high (p>0.05). Conclusion: This study showed that most temporary resin restorations exhibited color stability in the staining solution. The darker the color of the temporary resin restoration, the higher the color stability against extrinsic staining.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.66-71
• /
• 2010

This paper studies the effect of saturation of backfill on the seismic stability of reinforced soil walls (RSWs) using centrifuge shaking table tests. For comparison, degradation of static stability and seismic stability of a RSW under unsaturated condition was also investigated. Test results showed that the RSW under saturated condition had enough static stability. However, seismic stability of saturated RSW significantly decreased as compared with that under unsaturated condition. The saturated model RSW did not collapse, though it showed large deformation. It maintained sufficient stability after shakings although a clear slip surface appeared in the backfill. Finally, it is discussed how to evaluate residual stability of RSWs damaged by earthquakes with test results and the simple evaluation method proposed by authors.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.301-308
• /
• 1999

The construction of great deep tunnels has become an important part in tunnel construction especially in the mountain area. Therefore, it is necessary to establish the proper method of the stability analysis for great deep tunnels. In this paper presents the study result on the followings: (1) Evaluation of practical problem on the stability analysis of great deep tunnels. (2) Proposal of the proper on method for great deep tunnels analysis considering the depth of overburden. (3) Understanding of the ground behavior of the great deep tunnel through the sensitivity analysis and the parametric study.

• 터널과지하공간
• /
• 제7권2호
• /
• pp.150-157
• /
• 1997

Various analytical, empirical and theoretical methods for slope stability assessment were applied on slopes to develop aggregate quarry optimally. Among them are block theory, stereographic analysis, RMR, SMR, limit equilibrium method and maximum likelihood. Test site was estimated that slopes were apt to fail although rock quality was good. Modified direction and dip angle was suggested for stability. To reduce the overbreak and to improve the stability, the vertical blasting was recommended for new subground level.

• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.40-51
• /
• 1995

The assemblability was determined by the structure of product and the relationship between composing parts and machining parts. In this paper, the bolt was divided into bolt-head, -shaft, -thread and -end. For the better assemblability in bolting process, the geometric and technological characteristics of bolts in terms of pre- and in-assembly process were analyzed. And this paper presents assemblability evaluation for bolt feature design alternatives. For this evaluation system, we considered systematically eight factors for assemblability, but introduced two factores for the stability of laying and for the handlability of parts. And AutoCAC system is interfaced with the evaluation system written in C-language.