• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.51.2-51.2
• /
• 2009

본 실험에서는 레이저 간섭 리소그래피를 이용한 2차원 나노 패턴을 형성하였고, 수열합성법을 이용하여 90 도에서 ZnO 나노 기둥을 ZnO/Si 기판 상에 제작 하였다. ZnO 버퍼층은 스퍼터를 이용하여 200도, Ar 분위기에서 증착 하였으며, 레이저 간섭 리소그래피를 이용하여 두 번의 노광을 통해 2차원 나노 패턴을 형성하였다. 먼저, 최적화된 포토레지스트를 ZnO/Si 기판 위에 도포하고, 2500rpm에서 30초간 스핀코팅 한 후, 첫번째 노광을 실시 하였고, ZnO/Si 기판을 회전시켜 첫번째 노광과 교차 시킨 다음 두 번째 노광을 통해 교차하는 부분만 현상되도록 하였다. 기판의 회전 및 기판과 입사 레이저 사이의 각도를 조절하여 제작된 나노 패턴의 종류는 square lattice, centered rectangular lattice, oblique lattice, hexagonal lattice, rectangular lattice, 5가지로, 2차원의 모든 격자를 제작 하였다. 저온 수열합성법에서는 Na citrate를 형상제어제 (surfactant ions)로 사용하여 ZnO 나노 기둥을 형성하였다. $NH_4OH$를 이용하여 용액의 pH를 조절하였고, Zn nitrate hexahydrate를 Zn의 원료 물질로 사용하였다. 2차원 나노 패턴의 3차원 형태는 Atomic force microscopy (AFM, Veeco instruments, USA)를 이용하여 접촉 모드에서 관찰하였고, ZnO 나노 구조는 주사 전자 현미경 (FE-SEM, Model: JSM-6701F, Tokyo, Japan) 를 통하여 분석 하였다. 나노 패턴의 AFM 분석 결과 ZnO/Si 기판상에 포토레지스트가 주기적인 배열을 가지는 것을 확인하였고, ZnO/Si 기판상에 포토레지스트가 완전히 현상된 부분이 일정한 배열을 가지는 것을 확인하였다. 포토레지스트가 현상되어 기판의 표면이 드러난 부분의 크기는 약 250nm로 측정되었다. ZnO 나노 구조의 FE-SEM 분석 결과, 각각의 나노 구조가 나노패턴 중 완전히 현상된 부분만을 통하여 성장되었다는 것을 확인하였고, 형상 제어제로 사용된 Na citrate의 첨가 여부에 따라 나노 구조의 모양이 변화되었다는 것을 알 수 있었다. Na citrate 가 첨가된 나노 기둥의 경우 약 500nm의 길이를 가지는 하나의 기둥 형태로 성장하였다는 것을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1282-1290
• /
• 2000

The LHCP circularly polarized antenna operating at the satellite broadcast receiving band is developed by employing the sequential-rotation technique in which each truncated-corner patch square element is arranged in the triangular lattice type. Antenna designed with sequentially rotated technique of triangular lattice type has the effect of improved axial-ratio bandwidth, cross-polarization etc., and the degradation of radiation pattern can be reduced significantly by minimizing the radiation loss of feeding line structure. Characteristics of antenna designed is satisfied with specifications of array antenna for DBS that is -27 dB of side lobe level and -20 dB of cross-polarized level at $\Phi$=45$^{\circ}$ plane.

• Journal of Communications and Networks
• /
• v.18 no.5
• /
• pp.677-687
• /
• 2016

Multi-way relay networks (MWRNs) allow multiple users to exchange information with each other through a single relay terminal. MWRNs are often incorporated with capacity achieving lattice codes to enable the benefits of high-rate signal constellations to be extracted. In this paper, we analytically characterize the symbol error rate (SER) performance of a functional decode and forward (FDF) MWRN in the presence of channel estimation errors. Considering M-ary quadrature amplitude modulation (QAM) with square constellations as an important special case of lattice codes, we obtain asymptotic expressions for the average SER for a user in FDF MWRN. The accuracy of the analysis at high signal-to-noise ratio is validated by comparison with the simulation results. The analysis shows that when a user decodes other users with better channel conditions than itself, the decoding user experiences better error performance. The analytical results allow system designers to accurately assess the non-trivial impact of channel estimation errors and the users' channel conditions on the SER performance of a FDF MWRN with M-QAM modulation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.11
• /
• pp.1013-1019
• /
• 2011

Sound attenuation of periodically arranged cylindrical rods is studied numerically and experimentally. Cross section of the cylinder is circular and arrays are in a square lattice. Cylinders are made of steel, and consist of five groups with different diameters from 27.2 mm to 48 mm. Each group has 5 rows, while number of cylinders in a row varies from 17 to 31. The area filling fraction is about 60~61 %, which leads to the stop bandgap(2.9 kHz ~ 8.4 kHz). Sound attenuation is computed using two-dimensional BEM, and measurement is done by using a speaker and microphones in a semi-anechoic room. Comparison of the results by BEM and experiment shows that attenuation spectra are qualitatively in agreement, although experiment gives higher attenuations than BEM. After results by BEM are scaled up in accordance with cylinder diameter, it is observed that attenuation curves are in good agreement, which confirms that analysis by BEM is done correctly. It is also found that the measured bandgaps are shifted toward lower frequency by 0.5 kHz ~ 1.2 kHz, when compared to the predictions obtained from infinitely repeated two-dimensional cylinder arrays.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.7
• /
• pp.3010-3025
• /
• 2016

Lattice reduction (LR) has been used widely in conventional multiple-input multiple-output (MIMO) systems to enhance the performance. However, LR is hard to be applied to the relay systems which are important but more complicated in the wireless communication theory. This paper introduces a new viewpoint for utilizing LR in multiuser MIMO relay systems. The vector precoding (VP) is designed along with zero force (ZF) criterion and minimum mean square error (MMSE) criterion and enhanced by LR algorithm. This implementable precoder design combines nonlinear processing at the base station (BS) and linear processing at the relay. This precoder is capable of avoiding multiuser interference (MUI) at the mobile stations (MSs) and achieving excellent performance. Moreover, it is shown that the amount of feedback information is much less than that of the singular value decomposition (SVD) design. Simulation results show that the proposed scheme using the complex version of the Lenstra--Lenstra--Lovász (LLL) algorithm significantly improves system performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5C
• /
• pp.403-412
• /
• 2008

This paper presents the methods which obtain the solution of Wiener-Hopf equation by LMS algorithm and get the coefficient of TDL filter in lattice filter directly. For this result, we apply an orthogonal input signal generated by lattice filter into an equivalent Wiener-Hopf equation and shows the scheme that can obtain the solution by using the MMSE algorithm. Conventionally, the method like aforementioned scheme can get an error and regression coefficient recursively. However, in this paper, we can obtain an error and the coefficients of TDL filter recursively. And, we make an theoretical analysis on the convergence characteristics of the proposed algorithm. Then we can see that the result is similar to conventional analysis. Also, by computer simulation, we can make sure that the proposed algorithm has an excellent performance.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.1
• /
• pp.56-65
• /
• 2007

This paper describes physical meanings of various influences of cavity (or pillar) shape and filling factor of dielectric material on band structures in two-dimensional photonic crystals. Influences of circular and rectangular cross-sections of cavity (or pillar) arrays on photonic band structures are considered theoretically, and significant aspects of square and triangular lattices are compared. It is shown that both averaged dielectric constant of the photonic crystal and distribution profile of photon energy play important roles in designing optical properties. For the triangular lattice, especially, it is shown that cavity array with a rectangular cross-section breaks the band structure symmetry. So, we discuss this point from the band structure and address optical properties of lattice with a circular cross-section cavity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1271-1276
• /
• 2004

Two-dimensionally arrayed nanocolumn lattices were fabricated by using double-exposure laser holographic method. The hexagonal lattice was formed by rotating the sample with 60 degree while the square lattice by 90 degree before the second laser-exposure. The reactive ion etching for a typical time of 30 min using CH$_4$/H$_2$ plasma enhanced the aspect-ratio by more than 1.5 with a slight increase of the bottom width of columns. The etch-damage was observed by photoluminescence (PL) spectroscopy which was removed by the wet chemical etching using HBr/$H_2O$$_2$/$H_2O$ solution, leading into the enhanced PL intensities of the PCs.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1101-1104
• /
• 2002

In order to send the information certainly via the network against the packet lost caused by hardware troubles or limitation of packet transferring, we must construct reliable network infrastructure. However, it is difficult to construct comfortable network early if we construct rely on the prediction or the experience through a lot of troubles. In this paper, we propose the method to construct reliable network infrastructure based on the computer network simulation. This simulation is based on the percolation model. Percolation model is known as the model that represents connections. We gave some simulations for the various network topologies: the square lattice network, the cubic lattice network, and the full connection type network.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.236-237
• /
• 2003

최근 공진기 형태가 없는 2차원 광결정(photonic crystal) 레이저가 그것의 2차원 되먹임과 거울 없는 발진 현상과 같은 특이한 특성으로 인해 많은 관심을 끌고 있다. 이러한 레이저는 photonic band edge에서 빛의 군속도의 감소에 근거하여 작동한다. 이 photonic crystal band edge 레이저는 2차원 형태의 Distributed-Feedback(DFB) 레이저 형태로 볼 수 있다. 지금까지 보고된 레이저는 0.1 정도의 매우 작은 굴절률 변화를 가지고 있고 크기가 (100$\mu$m)$^2$이상으로 상당히 크다. (중략)