Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Sound Attenuation by Cylinders Arranged in a Lattice

격자구조로 배열된 실린더에 의한 음파감쇠

  • Received : 2011.08.16
  • Accepted : 2011.09.27
  • Published : 2011.11.20
Download PDF
⟨ Previous Next ⟩

Abstract

Sound attenuation of periodically arranged cylindrical rods is studied numerically and experimentally. Cross section of the cylinder is circular and arrays are in a square lattice. Cylinders are made of steel, and consist of five groups with different diameters from 27.2 mm to 48 mm. Each group has 5 rows, while number of cylinders in a row varies from 17 to 31. The area filling fraction is about 60~61 %, which leads to the stop bandgap(2.9 kHz ~ 8.4 kHz). Sound attenuation is computed using two-dimensional BEM, and measurement is done by using a speaker and microphones in a semi-anechoic room. Comparison of the results by BEM and experiment shows that attenuation spectra are qualitatively in agreement, although experiment gives higher attenuations than BEM. After results by BEM are scaled up in accordance with cylinder diameter, it is observed that attenuation curves are in good agreement, which confirms that analysis by BEM is done correctly. It is also found that the measured bandgaps are shifted toward lower frequency by 0.5 kHz ~ 1.2 kHz, when compared to the predictions obtained from infinitely repeated two-dimensional cylinder arrays.

Keywords

References

  1. Krauss, T. F., De La Rue, R. M. and Brand, S., 1996, Two-dimensional Photonic Bandgap Structures Operating at near-Infrared Wavelengths, Nature, Vol. 383, pp. 699-702. https://doi.org/10.1038/383699a0
  2. Pennec, Y., Vasseur, J. O., Djafari-Rouhani, B., Dobrzynski, L. and Deymier, P. A., 2010, Two-dimensional Phononic Crystals: Examples and Applications, Surface Science Reports, Vol. 65, pp. 229-291. https://doi.org/10.1016/j.surfrep.2010.08.002
  3. Sigalas, M., Kushwaha, M. S., Economou, E. N., Kafesaki, M., Psarobas, I. E. and Steurer, W., 2005, Classical Vibrational Modes in Phononic Lattices : Theory and Experiment, Z. Kristallogr. Vol. 220, pp. 765-809. https://doi.org/10.1524/zkri.2005.220.9-10.765
  4. Martinez-Sala, R., Sancho, J., Sanchez, J. V., Gomez, V. and Llinares, J., 1995, Sound Attenuation by Sculpture, Nature, Vol. 378, p. 241.
  5. Kushwaha, M. S., 1997, Stop-bands for Periodic Metallic Rods: Sculptures that can Filter the Noise, Appl. Phys. Lett., Vol. 70, pp. 3218-3220. https://doi.org/10.1063/1.119130
  6. Sanchez-Perez, J. V., Caballero, D., Martinez-Sala, R., Rubio, C., Sanchez-Dehesa, J., Meseguer, F., Llinares, J. and Galvez, F., 1998, Sound Attenuation by a Two-dimensional Array of Rigid Cylinders, Physical Review Letters, Vol. 80, pp. 5325-5328. https://doi.org/10.1103/PhysRevLett.80.5325
  7. Kushwaha, M. S. and Halevi, P., 1996, Giant Acoustic Stop Bands in Two-dimensional Periodic Arrays of Liquid Cylinders, Appl. Phys. Lett., Vol. 69, No. 1, pp. 31-33. https://doi.org/10.1063/1.118108
  8. Kushwaha, M. S. and Djafari-Rouhani, B., 1998, Sonic Stop-bands for Periodic Arrays of Metallic Rods: Honeycomb Structure, Journal of Sound and Vibration, Vol. 218, No. 4, pp. 697-709. https://doi.org/10.1006/jsvi.1998.1839
  9. Kushwaha, M. S. and Djafari-Rouhani, B., 1996, Complete Acoustic Stop Bands for Cubic Arrays of Spherical Liquid Balloons, J. Appl. Phys. Vol. 80, pp. 3191-3195. https://doi.org/10.1063/1.363259
  10. Sigalas, M. M., 1997, Elastic Wave Band Gaps and Defect States in Two-dimensional Composites, Journal of the Acoustical Society of America, Vol. 101, No. 3, pp. 1256-1261. https://doi.org/10.1121/1.418156
  11. Garcia-Pablos, D., Sigalas, M., Montero de Espinosa, F. R., Torres, M., Kafesaki, M. and Garcia, N., 2000, Theory and Experiments on Elastic Band Gaps, Physical Review Letters, Vol. 84, No. 19, pp. 4349-4352. https://doi.org/10.1103/PhysRevLett.84.4349
  12. Gaofeng, J. and Zhifei, S., 2010, A New Seismic Isolation System and its Feasibility Study, Earthquake Engineering and Engineering Vibration, Vol. 9, No. 1, pp. 75-82. https://doi.org/10.1007/s11803-010-8159-8
  13. Halkjar, S., Sigmund, O. and Jensen, J. S., 2006, Maximizing Band Gaps in Plate Structures, Structural and Multidisciplinary Optimization, Vol. 32, pp. 263-275. https://doi.org/10.1007/s00158-006-0037-7
  14. Robertson, W. M. and Rudy III, J. F., 1998, Measurement of Acoustic Stop Bands in Two-dimensional Periodic Scattering Arrays, Journal of the Acoustical Society of America, Vol. 104, No. 2, pp. 694-699. https://doi.org/10.1121/1.423344