• The Korean Journal of Pesticide Science
• /
• v.13 no.4
• /
• pp.203-208
• /
• 2009

In order to elucidate the effect of spreader-stickers on the rainfastness of dithianon and chlorothalonil wettable powders, and to estimate the possibility of suggesting good new formulations, the fungicide residues on the leaf surface of hot pepper was assessed and compared after the drop-wise applications of fungicide suspensions containing spreader-sticker on leaf surface followed by artificial raining. Three commercial spreader-stickers, which were Cover, Reitron and Silwet, not only made the rainfastness of dithianon wettable powders worse on hot pepper leaf, but increasing their concentrations also accelerated it further. On the other hand, to chlorothalonil wettable powder, Reitron showed the 3-fold improvement of rainfastness. But, for the rest, there was no improvement as well. The effect of N-octylpyrrolidone (NOP) on rainfastness of both fungicides was excellent. Soybean oil formulations containing leaf-penetrable nonionic surfactant, which was either polyoxyethylene monotridecyl ether or polyoxyethylene monolauryl ether, improved dithianon rainfastness, but the ones containing conventional emulsifiers did not.

• Journal of Mechanical Science and Technology
• /
• v.18 no.8
• /
• pp.1306-1311
• /
• 2004

We suggest a new type of swing motion control system for a crane system in which a small auxiliary mass is installed on the spreader. The actuator reacting against the auxiliary mass applies inertial control forces to the spreader of the container crane to reduce the swing motion in the desired manner. In this paper, as the basic and first step, we apply the $H_{\infty}$ control approach to anti-sway control system design problem. And, it will be shown that the proposed control strategy is useful and it can be easily applicable to the real world. So, in this study, we investigate usefulness of the proposed anti-sway system and evaluate system performance through simulation and experimental studies.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.660-665
• /
• 2007

This Study is a structure analysis about twin lift telescopic Spreader that usually loading and unloading a container in harbor. Applied load is assumed by lifting 65tons that is the maximum weight of real container. The finite element analysis for 3D model is performed by ABAQUS/Standard. We made an estimate of safety by evaluating the results of the finite element analysis.

• Journal of Mechanical Science and Technology
• /
• v.18 no.4
• /
• pp.681-688
• /
• 2004

For use of the thermal cycle of the biochemical fluid sample, the isothermal temperature source with a large surface area was designed, fabricated and its thermal characterization was experimentally evaluated. The comprehensive overview of the technology trend on the temperature control devices was detailed. The large surface area isothermal temperature source was realized by using the vapor chamber heat spreader. The cost-effectiveness and simple manufacturing process were achieved by using the metal-etched wick structure. The temperature distribution was quantitatively investigated by using IR temperature imaging system at equivalent temperatures to the PCR thermal cycle. The standard deviation was measured to be within 0.7$^{\circ}C$ for each temperature cycle. This concludes that the presented isothermal temperature source enables no temperature gradient inside bio-sample fluid. Furthermore it can be applied to the cooling of the electronic devices due to its slimness and low thermal spreading resistance.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.230-237
• /
• 2003

On this study, we operated the dynamic response for impact load of impact absorbing system for spreader by the finite element analysis and showed respectively the spring constant and the damping coefficient which the reaction force by impact was the lowest value for three types impact absorbing system according to the change of system, also we presented the change of impact reaction force according to the spring constant and the damping coefficient. Additionally, among the three types impact absorbing system according to the change of system, the reaction force of model II was the lowest value and the next model which has higher value than model II was model Iand model III has the highest value in the three types.

• Journal of Power System Engineering
• /
• v.7 no.3
• /
• pp.54-60
• /
• 2003

In general, the swing motion of the crane is controlled and suppressed by activating the trolley motion. In this paper, we suggest a new type of anti-sway control system of the crane. In the proposed control system, a small auxiliary mass(moving-mass) is installed on the spreader and the swing motion is controlled by moving the auxiliary mass. The actuator reaction against the auxiliary mass applies inertial control forces to the container to reduce the swing motion in the desired manner. In this paper, we apply the $H_{\infty}$ based control technique to the anti-sway control system design problem. And the experimental result shows that the proposed control system is shown to be useful and robust to disturbances like winds and initial sway motion.

• Journal of Animal Environmental Science
• /
• v.6 no.1
• /
• pp.37-44
• /
• 2000

A new hose slurry spreader with improved spreading uniformity is developed to distribute the slurrynear to the soil surface and to reduce odor problems. The precision of distributed slurry was investigated using 3 types of slurry and found to be dependent on the rotor speed. For the solid matter separated fluid containing 0.1% of dry matter rotor speed of 150 rpm showed best uniformity with CV of 10% In the case of slurry from dairy cattle which contains 8.2% of dry matter high rotor speed of 330 rpm showed best result with CV of 7.2% Also swine slurry which has a 13.6% of dry matter content showed the best result of 8.1% CV at the high rotor speed of 250rpm. A high rotor speed generates enough pressure in the central distributor and as a result uniform distribution of slurry can be achieved. In conclusion it is highly recommended rotor speed of 300 rpm to get the best performance.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.292-296
• /
• 2012

An optimum heat sink for a 30 W chip on board (COB) LED down-light is designed, fabricated, and characterized. By using the SolidWorks Flow simulator and thermal analysis software, the thermal characteristics of the optimum heat sink is analyzed. Four different types of heat sink are simulated and an optimum structure of the heat sink is found. The simulated temperature of the heat sink when operating the LED down-light is $55.9^{\circ}C$, which is only a difference of $2^{\circ}C$ from the measured temperature. In order to reduce the temperature further, a copper spreader is introduced to the heat sink. The temperature of the heat sink with the copper spreader is $3^{\circ}C$ lower than without the copper spreader.

• Journal of Power System Engineering
• /
• v.8 no.1
• /
• pp.55-61
• /
• 2004

In general, the swing motion of the crane is controlled and suppressed by activating the trolley motion. In this paper, we suggest a new type of anti-sway control system of the crane. In the proposed control system, a small auxiliary mass(moving-mass) is installed on the spreader and the swing motion is controlled by moving the auxiliary mass. The actuator reaction against the auxiliary mass applies inertial control forces to the container in order to reduce the swing motion in the desired manner. In this paper, we apply the $H_{\infty}$ based control technique to the anti-sway control system design problem. And the experimental result shows that the proposed control system is useful and robust to disturbances like winds and initial sway motion.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.2
• /
• pp.152-156
• /
• 2012

BACKGROUND: This research has investigated the residue patterns of insecticide flubendiamide on three species of peaches with different surface forms, and the residue amounts of them when mixed with a spreader. METHODS AND RESULTS: Pesticide used for field application on peaches was 20% flubendiamide of suspension concentrate(SC) and was sprayed at a recommended rate. The residue amounts of flubendiamide in peach were analyzed by HPLC equipped with UV detector. After the observation with a microscope, the rank of fuzz amount on peach's surface was Kurakatawase, Wolmi in descending order and Cheonhong did not have any fuzz. The residue amounts of flubendiamide were 0.54 mg/kg for Kurakatawase, 0.43 mg/kg for Wolmi and 0.10 mg/kg for Cheonhong, respectively. When flubendiamide was used with a spreader, polyoxy ethylene methylpoly siloxane, the residue amount for Kurakatawase barely changed at 0.55 mg/kg regardless of mixing with a spreader, and at 0.53 mg/kg for Wolmi. In Cheonhong, the residue amount was 0.48 mg/kg, which increased by 4.8 times due to the use of a spreader. CONCLUSION: This result indicates that the residue amounts of flubendiamde were affected by the surface forms of peaches, and in the presence of a spreader the residue amount did not increase in fuzzy species, but was affected greatly for species without fuzz.