• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.249-250
• /
• 2021

The use of smart equipment such as drones is increasing in construction sites. In particular, there are frequent cases where two or more drones must be used at the same time. This leads to different considerations than when operating a single unit. This study aims to analyze the requirements to be considered in the case of the operation of drones that monitor fine dust and drones that reduce fine dust in order to reduce fine dust generated in construction sites.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.33-38
• /
• 2023

Spray cooling is a method of cooling high-temperature heating elements by spraying droplets. Recently, spray cooling has been proposed for use in next-generation nuclear reactors. When droplets are sprayed onto the outer wall of a heat exchanger tube, a film boiling occurs on the outer wall. Over time, the outer wall temperature decreases, and a liquid film forms on the outer wall, and the heat exchanger outer wall is subsequently cooled by the liquid film. In this case, the liquid film thickness has a great influence on the heat removal performance. In this study, an experimental study was conducted to measure the liquid film thickness distribution in a droplet spray environment. For this purpose, a method using the electrical conductivity of the liquid was adopted.

• 한국약용작물학회지
• /
• 제3권3호
• /
• pp.259-264
• /
• 1995

This study was carried out to find cultivation condition of peony in Euiseong district from 1994 to 1995. 1. Age distribution in cultivation of peony was from 30's to 50's and cultivated years was mainly from 5 years to 10 years, but there was more than 15 years 2. Cultivating area per house hold were 1300 pyeong average, there were moderate $400{\sim]1000$ pyeong and also those are occupied 22.6% more than 2000 pyeong. 3. The mothods of transplanting in Euiseong peony which Euiseong district was mostly divided peony but Yeongchen district used seedling stock. No. of sprout was mostly $3{\sim}4$ and planting time was mainly from Mid to Late of October. 4. The percentage of sterilization of soil and seedling stock was 77. 4%, in mulching by vinyl in tran­splanting 64. 5% in black vinyl and 25. 8% in white one. 5. Number of plant in peony planting was $3000{\sim}4000$ plant per l0a even more there was more than 8000 plant. 6. Chemical spraying time in peony field was 2 time in $1{\sim}2$ years cultivating, and $3{\sim}4$ time in $3{\sim}4$ years one. 7. Condition of fertilizer application in peony field was 40% in non-application, but $56.7{\sim}76.7%$ in 2 year to 3 years, and the time of fertilizer was mainly 3 time. 8. Drying time peony after havesting was from 12 to 24 hours by briquet stove and 24 hours by ma­chine of hot wind, also dry method of peony was mixed briquet stove and hot wind machine.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.109.2-109
• /
• 2003

A basic spray program for apple in which fungicides are scheduled to spray at 15-day interval from petal fall to late August was formulated on the properties of several selected fungicides. In order to improve it, experimental plots, completely randomized block with 3 replications, were prepared in an orchard of 15 years old Fuji cultivar, and the spray programs in which only one chemical in the basic spray program was substituted with others were applied to each plot. It was revealed that only single substitution of the fungicide in the basic spray program makes a great differences in the control of white rot and bitter rot, and that the control property of the fungicides against the two diseases was quite variable even by the time of application. A simila! ! r trial was conducted in 2002 with a new basic spray program that was formulated with fungicides that have shown best control in each spraying time in the previous trial, similar results were obtained. Applying this method, the usefulness of certain fungicide in the spray program for apple could be properly assessed. Anthracnose of Robinia pseudo-acacia L. caused by Collectotrichum spp.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.686-689
• /
• 2002

The application of the ultrasonic nozzle has been extended because it is possible atomization of liquid material. In this study, the characteristics of the ultrasonic nozzle and ceramic oscillator were investigated. The oscillator for the ultrasonic nozzle were made piezoelectric ceramic of $Pb[(Sb_{1/2}Nb_{1/2})_{0.035}-(Mn_{1/3}Nb_{2/3})_{0.065}-(Zr_{0.49}Ti_{0.51})_{0.90}]O_3$. The electromechanical coupling factor$(k_p)$ and mechanical quality factor$(Q_m)$ showed the values of 0.555, 1,214 respectively when the Zr/Ti ratio was 49/51. Moreover, this oscillator will have the temperature stability because it's curie temperature is $322[^{\circ}C]$. The driving current of ultrasonic nozzle showed the value of 80[mA] when the driving time was 10[min.]. Also, The surface temperature of ceramic oscillator showed $80[^{\circ}C]$ at driving time 10[min.] We knew that the ultrasonic nozzle had stabile driving above 10[min.].

• 한국인터넷방송통신학회논문지
• /
• 제20권4호
• /
• pp.149-154
• /
• 2020

본 연구에서는 블루투스를 이용하여 스마트폰 으로 제어되는 Smart Diffuser 디바이스의 초기모델을 개발하였다. Smart Diffuser는 디바이스에 주입하는 오일을 분사시키기 위해 초음파 진동자를 이용하였다. 고휘도 LED를 사용하여 오일이 분사되는 동안에 색상 변화가 보여 지도록 디바이스를 개발하였다. 휴대용 디바이스인 점을 감안하여 충전 시간 문제를 해결하기 위해 40mAh의 Li-Po 배터리를 사용하여 장시간 사용할 수 있도록 설계를 하였다. Bluetooth Low Energy를 이용하여 저전력 구동을 구현을 함으로서 초기 설계모델의 유용성에 대해 확인 하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.989-997
• /
• 2018

Massive event stream brings us great challenges in its volume, velocity, variety, value and veracity. Picking up some valuable information from it often faces with long detection time, high memory consumption and low detection efficiency. Aiming to solve the problems above, an efficient complex event detection method based on NFA_HTS (Nondeterministic Finite Automaton_Hash Table Structure) is proposed in this paper. The achievement of this paper lies that we successfully use NFA_HTS to realize the detection of complex event from massive RFID event stream. Specially, in our scheme, after using NFA to capture the related RFID primitive events, we use HTS to store and process the large matched results, as a result, our scheme can effectively solve the problems above existed in current methods by reducing lots of search, storage and computation operations on the basis of taking advantage of the quick classification and storage technologies of hash table structure. The simulation results show that our proposed NFA_HTS scheme in this paper outperforms some general processing methods in reducing detection time, lowering memory consumption and improving event throughput.

• 소성∙가공
• /
• 제21권1호
• /
• pp.58-66
• /
• 2012

The work roll surface temperature rises and falls repetitively during hot slab rolling because the work roll surface is cooled continuously by water. This study focused on Std. No. 7 to determine a cooling method which significantly reduces the tangential tensile stresses on the work roll surface of the hot slab mill at Hyundai Steel Co. in Korea. A series of finite element analyses were performed to compute the temperature distribution and the tensile stresses in the circumferential direction of the work roll. The virtual slab model was used to reduce the run time considerably by assigning a high temperature to the virtual slab. Except for the heat generated by plastic deformation, this is equivalent to the hot rolling condition that a high temperature slab (material) would experience when in contact with the work rolls. Results showed that when the virtual slab model was coupled with FE analysis, the run time was found to be reduced from 2000 hours to 70 hours. When the work roll surface cooled with a certain on-off patter of water spray, the magnitude of the tangential stresses on the work rolls were decreased by 54.1%, in comparison with those cooled by continuous water spraying. Savings of up to 83.3% in water usage are possible if the proposed water cooling method is adopted.

• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.127-128
• /
• 2011

Vinegar has been considered as a potential organic herbicide, but more knowledge is needed about acetic acid concentration, application volume and use of adjutants on weed control. In this study, we determined optimum acetic acid concentration and spraying time on several weed species. Vinegar is more effective in broadleaf weeds than grasses. Vinegar is also effective in controlling younger weeds such as $3^{rd}$ to $4^{th}$ weeks after emergency. For example, $3^{rd}$ weeks after emergency weeds were easily controlled at 2-3% of vinegar solution. But $4^{th}$ weeks after emergency weeds were controlled at 4-5% of vinegar. Therefore vinegar concentration was recommended about 5%, and application time was when the weeds were young-within 3 leaf stage.

• 농약과학회지
• /
• 제18권4호
• /
• pp.330-335
• /
• 2014

본 연구는 chlorantraniliprole과 ethaboxam 성분에 대해 결구 배추 속과 겉잎 중 잔류수준을 비교하고 겉잎의 수세, 데치기 및 가열조리에 의한 농약 잔류량의 변화를 알아보기 위해 수행하였다. Chlorantraniliprole은 3회 살포(수확 전 30일)한 배추 속과 겉잎(포기의 바깥 4장)에서 각각 <0.01 mg/kg, 0.076 mg/kg으로, 4회 살포(수확 전 10일)한 배추 속과 겉잎에서 각각 <0.01 mg/kg, 1.2 mg/kg 수준으로 잔류하였다. Ethaboxam은 3회 살포(수확 전 30일)한 배추 속과 겉잎에서 각각 <0.05 mg/kg, 0.22 mg/kg으로, 4회 살포(수확 전 10일)한 배추 속과 겉잎에서 각각 <0.05 mg/kg, 1.2 mg/kg 수준으로 잔류하였다. 실험한 두 성분은 배추 속에서는 검출되지 않지만 겉잎에 10-100배 높은 수준으로 잔류하는 것으로 나타났다. 그러므로 배추 속을 재료로 하는 배추김치는 농약에 대한 안전성에 대해 우려할 필요가 없을 것으로 판단된다. 또한 농약 잔류실험에서 배추 시료 수확시 겉잎의 제거정도에 대해 주의해야 될 것으로 생각된다. 한편 우거지에서는 두 성분의 잔류농도가 배추 겉잎의 10% 미만으로, 가열처리까지 하게 되면 5% 미만으로 낮아져 수세 및 데치기와 같은 우거지 제조과정에서 상당량의 농약이 제거되는 것을 알 수 있었다.