• 제목/요약/키워드: spraying

Search Result 1,333, Processing Time 0.023 seconds

Relationship between Exposure Concentrations to Methylene Chloride in Air and Carboxyhemoglobin Levels in Blood of Workers Engaged in Blowing, and Cleaning Operations (발포 및 세척 공정 근로자의 공기중 Methylene Chloride 노출 농도와 혈중 Carboxyhemoglobin 수준간의 상관관계에 관한 연구)

  • Shin, Yong Chul;Kim, Yang Ho;Yi, Gwang Yong
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.9 no.1
    • /
    • pp.87-98
    • /
    • 1999
  • The objectives of this study were to evaluate exposures to airborne methylene chloride and postshift carboxyhemoglobin (COHb) in blood of workers engaged in processes using blowing or cleaning agents, and to investigate correlation between methylene chloride concentrations and the blood COHb levels of workers. The geometric mean (GM) of workers' exposures (8 hour-time weighted averages, TWA) to airborne methylene chloride during cleaning molds using rags wetted with the solvent in the manufacture of flexible polyurethane foam (GM = 61.4 ppm), during operating the dip tank for cleaning molds in the manufacture of lens (GM = 61.0 ppm), and during cleaning the blowing nozzles by spraying the solvent in the manufacture of shoes (GM = 117.2 ppm) were exceeded the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value ($TLV^{(R)}$)-Time Weighted Average (TWA) (50 ppm). The COHb levels were significantly different among groups (p<0.05). The average COHh levels in blood of non-smoking workers were 2.0% in. low-level (<50 ppm) exposure group, and 3.9 % in high-level (>50ppm) exposure group. The average COHb levels in smoking workers were 3.1% in low-level exposure group, and 4.8% in high-level exposure group. The blood COHb levels of no-exposed workers to methylene chloride were 1.8% in non-smoking group, and 2.8% in smoking group. It was found that the COHb level dependeds on the methylene chloride concentration and smoking habit, and was highly correlated with methylene chloride concentration in air. The correlation coefficient was 0.81 among non-smoking workers. The estimated COHb level (3.6%) and 95% upper confidence limit (4.0%) corresponding to TLV-TWA of methylene chloride exceeded the current ACGIH Biological Exposure Index (COHb 3.5%) for carbon monoxide. The estimated COHb level (5.4%) at 100 ppm exceeded the standard (5%) recommended by National Institute for Occupational Safety and Health (NIOSH) for preventing adverse cardiovascular effect. The estimated COHb value and 95% upper confidence limit at 25 ppm of the Occupational Safety and Health. Adminstration (OSHA) Permissible Exposure Limit-TWA (PEL-TWA) were 2.6% and 3.0%, respectively. It is suggested that COHb in blood be kept below 3.0% to comply with OSHA PEL-TWA.

  • PDF

Increase of Larger-sized Pollen Number by Gametocide and Callus Induction in Anther Culture of Zoysia japonica Steud. (잔디의 약배양에 있어서 살정제 처리에 의한 Larger-sized Pollen의 발생빈도 증가 및 캘러스 유도)

  • Cho, Moon-Soo;Juang, Ue-Dong;Ye, Byong-Kwea;Ahn, Byung-Joon;Choi, Joon-Soo
    • Journal of Plant Biotechnology
    • /
    • v.30 no.1
    • /
    • pp.35-40
    • /
    • 2003
  • In this study we investigated the effect of gametocides on the number of larger-sized pollen in anther, and also induced callus from the anther culture of Zoysia japonica Steud. Before culturing, we have observed pollens in anther through fluorescence and electron microscopes to know pollen dimorphism. There were two types of pollens observed. One type (30-36 ${\mu}{\textrm}{m}$ in diameter) consisted of vacuolated, larger-sized pollens and the other (15-20 ${\mu}{\textrm}{m}$ in diameter) smaller-sized ones with dense cytoplasm and plenty of amyloplasts. Within few hours, all the smaller-sized pollens were dead, while larger-sized ones were viable for one or two days. To induct larger-sized pollens, various gametocides were leaf-sprayed on three booting stages cultured under 4$0^{\circ}C$ /15$^{\circ}C$ (day/night) before anther culturing. Number of these larger pollens were few (less than 1%) in anther without spraying gametocides. GA$_3$increased the number of larger-sized pollens when applied at mid-booting stage. GA$_3$ with 50 mg/L treatment caused the highest percentage (25.4%) of the larger-sized pollen. Anthers with GA$_3$ treatment were only produced calli on AA medium (modified B$_{5}$+8.0 mg/L 2,4-D +0.2 mg/L kinetin), but callus formation was quite low (less than 1%).).

Triazine Herbicide Treatment and Survival Rate of Pearl Millet Seedlings (Triazine 제초제(除草劑) 처리(處理)와 진주(眞珠)조의 생존율(生存率))

  • Choi, B.H.;Park, K.Y.
    • Korean Journal of Weed Science
    • /
    • v.10 no.2
    • /
    • pp.99-102
    • /
    • 1990
  • Pearl millet (Pennisetum americanum (L.) Leeke) has been found as a promising new forage crop of higher quality and yield in Korea since 1985. The objective of the study was to select preemergence herbicides for weed control in growing pearl millet in order to reduce production cost and with increased yields. Propazine (Milogard 4L) was the best in controlling weeds without its phytotoxicity at the standard application rate, and with the highest survival rate of seedlings of peal millet "Suwon 1" hybrid. Sprayings with Atrazine and Simazine caused lower survival rate of peal millet and with their light phytotoxicity as compared with manual weeding and Propazine spraying. Alachlor killed pearl millet seedlings almost completely. Pendimethalin also was not good for weed control of peal millet due to its severe phytotoxicity and with very low survival rate of pearl millet seedlings.

  • PDF

Improvement of Herbicide Use in Crop Production IX. Tank-mix Use of Acifluorfen and Haloxyfop-methyl for Weeding on Soybeans (Glycine max L.) Cropped after Barley (제초제(除草劑)의 사용법(使用법法) 개발(開發)을 위한 연구(硏究) - 제9보(弟9報) 맥후작(麥後作) 대두(大豆)(Glycine max L.) 잡초(雜草) 방제(防除)를 위한 Acifluorfen 과 Haloxyfop - methyl 의 혼용가능성(混用可能性) 연구(硏究))

  • Guh, J.O.;Lee, K.S.;Kim, D.K.
    • Korean Journal of Weed Science
    • /
    • v.4 no.2
    • /
    • pp.204-210
    • /
    • 1984
  • For weeding on the after-barley cropping soybean, the tank-mix use of postemergence herbicides acifluorfen and haloxyfop-methyl was tested. Acifluorfen has shown the transient leaf-burn on the newly formed soybean leaves, but no growth inhibitions. Under the treatment of acifluorfen only, grassy weeds occurred successively and explosively. However, under the combinated spraying of both herbicides, the grassy weeds could be controlled in a slight antagonistic, the broadleaved weeds in additive, and the total weed species including sedges in synergic tendencies, respectively. Also, to achieve the full-season weeding efficacies for the prominent crop yields, both herbicides are suggested to be mixed with more dosages than 0.245 kg ai/ha of acifluorfen and 0.15 kg ae/ha of haloxyfop-methyl, respectively.

  • PDF

Improvement of Herbicide Use in Crop Production VII. Weeding Effects in Systemic Use of Some Herbicides on Soybean(Glycine max L.) Cropped after Barley (제초제(除草劑)의 사용법(使用법法) 개발(開發)을 위한 연구(硏究) - 제7보(弟7報) 맥후작(麥後作) 대두(大豆)(Glycine max L.) 잡초방제(雜草防除)를 위한 수종제초제(數種除草劑)의 체계처리(體系處理)에 관한 연구(硏究))

  • Guh, J.O.;Lee, K.S.;Kim, D.K.
    • Korean Journal of Weed Science
    • /
    • v.4 no.2
    • /
    • pp.194-203
    • /
    • 1984
  • To evaluate the compatibility in systemic use of 4 kinds of herbicides on both weeds and soybeans, trials were conducted at Coll. Exp. Farm/Jonnam Nat'l. Univ., 1983. Among the experimented 4 herbicides, alachlor or metribuzin were applied at pre-emergence, and followed by postemergence spraying of acifluorfen or bentazon, respectively. All herbicides were applicated at rates of 0, 0.25, 0.5, and 0.75 kg active ingredients per ha. Under the conditions which Echinochloa crusgalli and Digitaria adscendense were dominating, most comprehensive compatibility was found from each rates 0.5 - 0.75 kg/ha at 60 days after crop seeding date. However, slight transient leaf burn was evident at the plots of metribuzin and/or acifluorfen applicated. The positive tendency of herbicide interactions in weeding efficacy was observed from the system in alachlor sequence. However, the results in crop growth and yields at hervest indicate the necessity of higher rates of each herbicides upto 0.75 kg/ha for the consistence weeding efficacies. And more excellent weeding results (crop growth and yields) on crop plants were provided from the plots which applicated by residual type herbicide, namely acifluorfen than bentzaon.

  • PDF

Culture Maturity of Lentinula edodes on Sawdust-Based Substrate in Relation to Fruiting Potential (표고 톱밥배지의 성숙도와 자실체형성 포텐셜)

  • Ohga, Shoji;Min, Du-Sik;Koo, Chang-Duck;Choi, Tae-Ho;Leonowicz, A.;Cho, Nam-Seok
    • Journal of the Korean Wood Science and Technology
    • /
    • v.28 no.1
    • /
    • pp.55-64
    • /
    • 2000
  • Culture maturity assessment can be used to control fruiting body flush timing. Culture maturity of sawdust-based substrate was evaluated by using oak mushroom, (Lentinula edodes (Berk.) Pegler). The influence of substrate water potential (${\psi}$) on the growth and fruiting of three genotypes of L. edodes was also investigated. Glucosamine content revealed a peak at the fruiting body senescent stage. Glucosamine increased steadily to the sporophore senescent stage, and sharply declined at crop treatment. Lipid phosphate and ergosterol contents peaked at pinning and button break stages, respectively. Therefore lipid phosphate and ergosterol contents would be considered as the convenient measurement for judging culture maturity and fruiting potentials. The substrate pH values before inoculation and on the fruiting stage were varied from 6.3 to 4.0. This pH changes were detected as changes in color from bluish purple to yellow by direct bromphenol blue(BPB) spraying, and shown a good correlation with fruit body yield of the 1 st flush. Concerning water potential of the cultures, a slight reduction of water potential, -0.5MPa, stimulated mycelial and colony growths on liquid, agar and sawdust-based substrates. The water potential of well-colonized matured substrate was -0.7MPa and -4.0MPa, before and after the fruiting, respectively. Excellent water providing capacity (higher ${\psi}$) is expected to well-matured cultures with a high density of mycelial colonization. Also, the substrate water potential significantly affected by the interaction between genotypes and spawn run time.

  • PDF

The Mechanical Properties of WC-CoFe Coating Sprayed by HVOF (고속화염용사코팅으로 제조된 WC-CoFe 코팅의 기계적 특성에 관한 연구)

  • Joo, Yun-Kon;Cho, Tong-Yul;Ha, Sung-Sik;Lee, Chan-Gyu;Chun, Hui-Gon;Hur, Sung-Gang;Yoon, Jae-Hong
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.25 no.1
    • /
    • pp.6-13
    • /
    • 2012
  • HVOF thermal spray coating of 80%WC-CoFe powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and hard ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen by chrome plating and the brittleness of ceramics coatings. 80%WC-CoFe powder was coated by HVOF thermal spraying for the study of durability improvement of the high speed spindle such as air bearing spindle. The coating procedure was designed by the Taguchi program, including 4 parameters of hydrogen and oxygen flow rates, powder feed rate and spray distance. The surface properties of the 80%WC-CoFe powder coating were investigated roughness, hardness and porosity. The optimal condition for thermal spray has been ensured by the relationship between the spary parameters and the hardness of the coatings. The optimal coating process obtained by Taguchi program is the process of oxygen flow rate 34 FRM, hydrogen flow rate 57 FRM, powder feed rate 35 g/min and spray distance 8 inch. The coating cross-sectional structure was observed scanning electron microscope before chemical etching. Estimation of coating porosity was performed using metallugical image analysis. The Friction and wear behaviors of HVOF WC-CoFe coating prepared by OCP are investigated by reciprocating sliding wear test at $25^{\circ}C$ and $450^{\circ}C$. Friction coefficients (FC) of coating decreases as sliding surface temperature increases from $25^{\circ}C$ to $450^{\circ}C$.

Biological Control of Plant Growth Using the Plant Growth-Promoting Rhizobacterium Bacillus mojavensis KJS-3 (Bacillus mojavensis KJS-3를 이용한 식물의 생육촉진 활성연구)

  • Pyo, Jae Sung;Shrestha, Sarmila Amatya;Park, Song Hee;Kang, Jae Seon
    • Journal of Life Science
    • /
    • v.24 no.12
    • /
    • pp.1308-1315
    • /
    • 2014
  • Biological control using the plant growth-promoting Rhizobacterium (PGPR) has received significant attention in recent years. PGPR has been linked with promoting growth in economically important crops, such as potatoes, tomatoes, and rice. Bacillus mojavensis KJS-3 (Moja-3), isolated from food waste, possesses antifungal properties against Aspergillus terreus, A. fumagatus, A. flavus, and Fusarium redolense, and it may have potential in the development of products for industrial applications. The main purpose of this study was to determine the effects of spraying the PGPR Bacillus mojavensis KJS-3 on the growth of altari radish (leaf number, leaf length, leaf weight, root length, and rhizome length, adjacent portion diameter, and weight) and lettuce (leaf number, length, width, and weight). Three different concentrations of the foliar spray treatment of B. mojavensis KJS-3 were applied to the altari radish and lettuce: the recommended standard concentration of $1{\times}10^9cfu/g$, half the standard concentration of $0.5{\times}10^9cfu/g$, and double the standard concentration of $2{\times}10^9cfu/g$). The B. mojavensis strain foliar spray treatment increased the growth of the leaves and roots of the altari radish and increased the growth of the lettuce leaves. For both plants, the recommended concentration of B. mojavensis KJS-3 produced better growth than half the standard concentration, and the growth was similar with the double dose. This study demonstrates positive effects of Moja-3, suggesting it may be a potential new bio-fertilizer for improving the growth of altari radish and lettuce.

A Study on the prescriptions of 『Sanbeon-bang(刪繁方)』 (『산번방(刪繁方)』의 의방(醫方)에 관한 연구)

  • Kim, Do-Hoon;Jeong, Chang-Hyun
    • The Journal of Korean Medical History
    • /
    • v.17 no.2
    • /
    • pp.111-127
    • /
    • 2004
  • This paper is mainly on the rsearch of the prescriptions of "Sanbeon-bang(刪 繁方)". For the research of prescription, investigated "Sanbeon-bang" from the side of symptoms of a disease, number of drugstuffs, table of contents, drugstuffs and acupuncture and moxibustion. With these investigation, made out a few tables, and with these tables made an attempt to understand the whole prescriptions of "Sanbeon-bang". "Sanbeon-bang" is of rich contents in internal medicine. Among internal medicine, related to Oro-Yukgeuk-Chilsang(五勞-六極-七傷) was most abundant. So we can guess "Sanbeon-bang" was a medical book specialized in exhaustion syndromes. It also deals with the Samcho-syndromes, as investigate from medical comments, has the perfect system of prescription in relative. From the investigation of the combination of drugstuffs, ascertained that, the number of simple prescription composed of one drugstuff was 38, combinational prescription composed of two drugstuffs was 9, minor prescription composed of three to five drugstuffs was 47, midum prescription composed of six to ten drugstuffs was 95, major prescription composed of eleven to twenty drugstuffs was 45, and mixed prescription composed over twenty drugstuffs was 1. Mentionable unique prescriptions in internal use were the forms of keeping in mouth. In external use they were fumigants, suppositories, powdered medicines, spraying the granular medication into the nasal cavity and eyedrops. And were abundant in soft extract(ointment) and plaster. In addition, there were the recordings of 18 types of cellulitis, types of incurable cellulitis and curing an illness by a charm. By the way, when comparing "Sanbeon-bang" with "Cheongeum-bang", all of which was quoted a lot in "Oedaebiyo-bang", "Cheongeum-bang" rather took medical comments of "Sanbeon-bang" than prescription. Although there were some prescriptons in "Sanbeon-bang" at the same category, "Cheongeum-bang" took another prescriptions which are more complexed than those of "Sanbeon-bang". In the same way, when comparing "Cheongeum-bang" with "Sonjinin-Cheongeum-bang(孫眞人千金方)", which didn't go through the correction of GyojeongUiseoguk of Bug-Song goverment, "Cheongeum-bang" often didn't take the prescriptions of "Sonjinin-Cheongeum-bang". Hence we can guess, "Cheongeumyo-bang" may have added a lot of prescriptions when undergoing the correction of of GyojeongUiseoguk. The total number of species of drugstuffs in "Sanbeon-bang" from the investigation was 284. The plant drugs were 208 species, the animal were 31 species, the minerals were 19 species and the other were 26 species. The prescriptions related to acupuncture and moxibustion in "Sanbeon-bang" were only moxibustional prescriptions. Which appeared one time per exhaustion and steaming of bone syndrome, Oro-Yukgeuk-Chilsang and Samcho syndrome. Appeared six times in muscle syndromes. But I cannot imagine the original form of acupuncture and moxibustion in "Sanbeon-bang" for deficiency of data.

  • PDF

Measurement of Retention, Repellency and Penetration of Pesticide for Protective Clothing (방제복에 대한 농약의 체류성, 발수성 및 침투성 측정)

  • Kim, Jong-Hwan;Cho, Yu-Jin;Song, Jong-Wook;Kim, Jeong-Han;Seo, Jong-Su
    • Korean Journal of Environmental Agriculture
    • /
    • v.35 no.4
    • /
    • pp.263-269
    • /
    • 2016
  • BACKGROUND: The personal protective equipments (PPEs) is the most important factor for reducing the pesticide exposure during the preparation and spraying of pesticides. This study was to investigate the retention, repellence and penetration of protective clothing of PPEs according to the ISO 22608 'Liquid penetration resistance-pipette test. Protective clothing for agriculture worker is very important for their health. However, test method for measurement of protective clothing is not presented in Korea. METHODS AND RESULTS: In order to measure the retention, repellence and penetration of protective clothing, a apparatus for pipette method in accordance with the ISO Guideline was prepared. The test was conducted at $25{\pm}5^{\circ}C$, $60{\pm}10%$ of relative humidity and pipette applied to a apparatus was validated to take exact amount(0.2 mL). The retention, repellence and penetration of five types of protective clothing and one type of shirt were analyzed by GC/MS. Pendimethalin(5% a.i, emulsion) was used as a test pesticide to measure above factors. The retention were less than 11.0% with the exclusion of two types(F4 and shirt) and the repellency was more than 67.0% with the exclusion of shirt material. The penetration was less than 5.4%, however, that of shirt was 66.7%. CONCLUSION: This results indicated that all protective clothing were suitable to use as PPEs according to the criteria specified by ISO Guide 22608. However, shirt was not suitable due to high penetration. This test method established for measurement the retention, repellence and penetration of protective clothing will help to establish the test notice of pipette method.