• 한국식품과학회지
• /
• 제25권2호
• /
• pp.171-173
• /
• 1993

냉장고내 공기의 청정장치로 자외선 공기순환식 살균장치를 개발할 목적으로 6 watt 자외선 램프와 순환 fan을 사용하여 공기 청정장치를 설계, 제작하였다. 자외선량은 Bacillus subtilis 포자의 D value의 5배에 이르게 하였으며 순환공기의 유속은 0.785 m/s이었으며 공기의 살균부 체류시간은 0.382 s이었다. 동 장치를 실내공기, 부패 건초 분말과 Bacillus subtilis 포자 현탁액으로 오염시킨 공기를 실온에서 80% 청정시키는 살균효과를 거두어 냉장고용 공기청정기를 설계하는데 필요한 자료를 얻었다.

• 한국잠사곤충학회지
• /
• 제33권1호
• /
• pp.6-8
• /
• 1991

낙엽전 상묘의 조기 굴취에 따라 예상되는 묘질의 악화를 예방하고 굴취작업 불편 등을 해소하기 위해서 수원 2개 장소, 공주, 청주, 장성 등 6개 지역에서 탈엽제인 에스렐 (2-chloroethylphosophonic acid, 39%) 400배액(약 1,000ppm)을 10월 10일부터 5일 간격으로 10월 30일까지 처리마다 한번씩 뽕잎에 살포하고 활착율과 묘질을 조사하였다. 1. 10a당 살포 소요 시간은 3.3시간, 엽량은 500$m\ell$ 소요되었다. 2. 10월 20일 이전 살포는 지역에 따라 활착율을 5-8% 감소시켰다. 3. 식재후 신초의 길이와 개수는 처리간에 차를 인정할 수 없었다. 따라서 지역에 관계없이 10월 20일 이후 살포할 경우 활착율과 식재후의 생육이 자연 낙엽한 묘목과 차가 없을 것으로 판단되었다.

• The Plant Pathology Journal
• /
• 제15권1호
• /
• pp.48-52
• /
• 1999

Ethaboxam is the first proprietary fungicide developed in Korea, registered in 1998 and commercialized in 1999 by LG Chemical Ltd., Korea. It is a derivative of aminothiazole carboxamide and formulated into 25% wettable powder for practical application in fields. Ethaboxam effectively controlled cucumber downy mildew caused by Pseudoperonospora cubensis, potato late blight caused by Phytophthora infestans, and pepper Phytophthora blight caused by P. capsici, and was superior or comparable to the commercial standards, when foliarly sprayed 3∼5 times until dripping off at approximately 7-day intervals during the growing season. Ethaboxam was required at least 125 mg/liter and 250 mg/liter for effective control of cucumber downy mildew, and potato late blight and pepper Phytophthora blight, respectively. There was not phytotoxicity observed o leaves, stems or fruits of cucumber, potato and pepper from any trial.

• Mycobiology
• /
• 제38권3호
• /
• pp.180-183
• /
• 2010

This study was conducted out to select a silkworm variety suitable for synnemata production of Isaria tenuipes. Four kinds of the mulberry silkworm varieties, Bombyx mori, were hybridized using a Japanese parental line and a Chinese parental line, and used to test for synemata formation in I. tenuipes. The larval period of normal silkworms was 22 hr longer than the silkworms inoculated with this fungus. Among the silkworm varieties tested, Hachojam had the shortest larval period with 23.02 days. The non-cocooning silkworm had a shorter larval period than the cocoon producing silkworms. The pupation rate of normal silkworms was about 9% higher than that of silkworms sprayed with I. tenuipes. Hachojam had the highest infection rate at 99.8%, but no significant difference was observed for the infection rate by silkworm variety. The production of synnemata was the best in JS171 $\times$ CS188 with an incidence rate of 99.3%, followed by Hachojam, and Chugangjam. The synnemata produced from Hachojam were the heaviest and showed white or milky-white in color.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1089-1094
• /
• 2009

Carbon nanotubes (CNTs) have excellent electrical, chemical stability, mechanical and thermal properties. In this paper, networks of Multi-walled carbon nanotube (MWCNT) materials were investigated as resistive gas sensors for ethanol ($C_2H_5OH$) detection. Sensor films were fabricated by air spray method for the multi-walled CNTs solution on glass substrates. Sensors were characterized by resistance measurements in the sensing system, in order to find the optimum detection properties for the ethanol gas molecular. The film that was sprayed with the MWCNT dispersion for 60 see, was 300 nm thick. And the electric resistivity is $2{\times}10^{-2}\;{\Omega\cdot}cm$. Also, the sensitivity and the linearity of MWVNT sensor for ethanol gas are 0.389 %/sec and 17.541 %/FS, respectively. The MWCNT film was excellent in the response for the ethanol gas molecules and its reaction speed was very fast, which could be using as ethanol gas sensor. The conductance of the fabricated sensors decreases when the sensors are exposed to ethanol gas.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2003년도 Challenges and Achievements in Environmental Health
• /
• pp.26-26
• /
• 2003

During the Viet Nam war, A Luoi located in Thua Thien Hue Province was heavily sprayed herbicides by the Ranch Hand Operation of U.S.A force (549.274 gallons). After 30 years of knocking the operation off, Dioxin has still contaminated on environment and human body in A Luoi valley. The results of the study show that there is an epidemiological relationship between AO/Dioxin exposure and increasing rate of reproductive anomalies and birth defects (the rate of reproductive anomalies including congenital deformities after the war during 10-year and 25-year is higher than that before the war from 1.5 to 4 times). The study found that the highest rate of reproductive anomalies is spontaneous abortion. The average is premature death and congenital deformities, and the lowest rate is dead foetus and hydratidiform mole. The results of the primary assessment suggested that Dioxin transport from environment to human body through the food chain exposed by Dioxin such as fish, chicken, duck. A mitigation plan for residual dioxin contamination from Agent Orange Hervicides is requeste indispensable to inhabitants in Aluoi District.

• 재활간호학회지
• /
• 제19권1호
• /
• pp.1-11
• /
• 2016

Purpose: To determine the effects of 10 % lidocaine spray and aroma hand massage on pain, anxiety, blood pressure, and pulse during arteriovenous (AV) fistula needling in hemodialysis (HD) patients. Methods: This study used a quasi-experimental design. Forty HD patients were assigned to either 10 % lidocaine spray group (n=21) or aroma massage group (n=19). 10 % lidocaine was sprayed 3 times around AV fistula 10 minutes before. Aroma hand massage was performed for 5 minutes with fluids containing 2 % of lavender, peppermint, and geranium concentrate mixture. Pain, anxiety, blood pressure, and pulse were measured during AV fistula needling without any intervention on the first week and during interventions on the second week. Data were analyzed with ${\chi}^2$ test, Fisher's exact test, t-test, paired t-test and MANCOVA. Results: Pain and anxiety were significantly decreased in both the lidocaine spray group and aroma massage group. Aroma hand massage was more effective to reduce pulse during AV fistula needling. Conclusion: The results suggest that 10% lidocaine spray and aroma hand massage may be effective to reduce pain, anxiety, and pulse during AV fistula needling in HD patients.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.687-690
• /
• 2004

Fabrication and characterization of dye-sensitized TiO2 solar cells(DSSC) consisting of spray-coated TiO2 electrode, an electrolyte containing I-/I3- redox couple, and a Pt-coated counter electrode carried out, using mainly FE-SEM and solar simulator. Also, effect of rapid thermal annealing(RTA) temperatue on I-V curves of DSSCS consisting of approximately 10m thickness and $5{\times}5mm2$ active area. No significant difference in the apparent size of TiO2 clusters was observed with increasing RTA temperature. Also, an open circuit voltage(Voc) of approximately 0.70V and a short-circuit photocurrent(Jsc) of 8 to 12mA/cm2 were observed in the TiO2 solar cell. With increasing RTA temperature upto 550oC, photocurrent density of dye-sensitized solar cells was enhanced, leading to enhancing the efficiency of dye-sensitized solar cells having Pt-electroplated counter electrode.

• Composites Research
• /
• 제23권1호
• /
• pp.31-36
• /
• 2010

본 연구는 탄소섬유강화플라스틱(CFRP) 복합재료로 제작된 항공기 등 구조물의 낙뢰에 의한 손상을 방지하기 위하여 전도성 은나노입자를 탄소섬유에 코팅한 후 에폭시 수지로 함침함으로써 CFRP의 전기전도도를 향상시키는 방법에 대한 것이다. 전기전도도 측정은 4점측정법을 통해 저항값을 측정하고 이를 전기전도도 값으로 변환하였으며, 나노입자 코팅 상태와 전기전도도의 변화를 관찰하였다. 또한 SEM과 EDS를 통해 탄소섬유 표면에 코팅된 은나노입자의 존재와 전기적 네트워크가 형성된 것을 확인하였다. 결과로써 일반 CFRP의 약 3배 이상의 전기전도도를 얻을 수 있었다.

• 한국표면공학회지
• /
• 제45권1호
• /
• pp.1-7
• /
• 2012

Multi-walled carbon nanotube (MWCNT) aluminum composite powders were deposited to form coatings using a high velocity oxygen fuel (HVOF) spraying process. High thermal energy and contact with atmospheric oxygen were supplied as the MWCNT aluminum composite particles were exposed to a gas flow field at high temperature (${\sim}3.0{\times}10^3$ K) during HVOF spraying. As a result, the particles underwent full or partial melting and rapid solidification due to the high thermal energy, and the exposure to oxygen induced the interfacial reaction of MWCNTs within the particle. The electrical and mechanical properties of MWCNT aluminum composite coatings were evaluated based on microstructure analysis. Electrical resistivity, elastic modulus, and micro-hardness, of the MWCNT aluminum composite coatings were higher than those of pure aluminum coating. The contribution of MWCNTs to the aluminum matrix can be attributed to their high electrical conductivity, dispersion hardening and anchoring effects. The relationship among the properties and the interaction of the MWCNTs with the aluminum matrix is discussed.