• Tribology and Lubricants
• /
• v.23 no.2
• /
• pp.49-55
• /
• 2007

A numerical analysis of elastohydrodynamic lubrication of elliptical contacts with both rolling and spinning has been carried out. A finite difference method with non-uniform grid systems and the Newton-Raphson method are applied to solve the problems. The velocity vectors resulting from combined spinning and rolling/sliding motion lead to asymmetric pressure distributions and film shapes. Pressure distributions, film contours and variations of the minimum and central film thicknesses are compared with various spin-roll ratios. Reduction of the minimum film thickness under spinning is remarkable whereas the central film thickness is relatively less. The spin motion have large effect on variations of the minimum film thickness with load parameter which are small in pure rolling/sliding cases. Therefore present numerical scheme can be used in the analysis of general elliptical contact EHL problems and further studies are required.

• Carbon letters
• /
• v.16 no.4
• /
• pp.223-232
• /
• 2015

This review presents current progress in the preparation methods of liquid crystalline nano-carbon materials and the liquid crystalline spinning method for producing nano-carbon fibers. In particular, we focus on the fabrication of liquid crystalline carbon nanotubes by spinning from superacids, and the continuous production of macroscopic fiber from liquid crystalline graphene oxide.

• Journal of the Korean Ceramic Society
• /
• v.33 no.10
• /
• pp.1079-1088
• /
• 1996

Discontinuous ${\gamma}$-LiAlO2 fibers for fiber-reinforcing MCFC matrixes have been produced by the sol-gel process using the centrifugal spinning apparatus of the Rotary type. Gel fibers could be obtained through spinning of stable LiAlO2 complex polymetric sols under the optimum spinning conditions (hollow-disc rotating velocity 9000 rpm sol feeding rate of 4ml/min flowing N2 temperature of 4$0^{\circ}C$ and flowing N2 pressure of 4 bar). It was found that defect free and densified ${\gamma}$-LiAlO2 fibers with the relative density of 98% and the mean diameter of 4.7${\mu}{\textrm}{m}$ were prepared when the spinned fibers were heat-treated to 100$0^{\circ}C$ on the specified heating schedule. in particular the mean diameter and length of fibers could be controlled by the pressure of flowing N2 and the chopping-sieving method respectively.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.205-212
• /
• 2006

Three-dimensional numerical study was carried out for the investigation of the detonation wave structures propagating in tubes. Fluid dynamics equations and conservation equation of reaction progress variable were analyzed by a MUSCL-type TVD scheme and four stage Runge-Kutta time integration. Chemical reaction was modeled by using a simplified one-step irreversible kinetics model. The variable gas properties between unburned and burned states were considered by using variable specific heat ratio formulation. The unsteady computational results in three-dimension show the detailed mechanisms of rectangular and diagonal mode of detonation wave instabilities resulting same cell length but different cell width in smoked-foil record. The results for the small reaction constant shows the spinning mode of three-dimensional detonation wave dynamics, which was rarely observed in the previous numerical simulation of the detonation waves.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.117-120
• /
• 2002

This research is related with the development of CNC spinning machine. The purpose is to use for developing the practical parts of automobile such as dams, pulley, etc. The machine structure is made by heavy duty frame for the steel products with high strength. The hydraulic servo system is applied for giving the exactness of control. In order to improve the spinnability, the involute curves can be generated in CNC program In the future, this spinning machine is applicable to development of all the parts of industry such as electric parts, automobile parts, aerospace and the military supplies.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.42-48
• /
• 2005

The effects of opening, carding, and repeated drawings on single fiber and bundle cotton characteristics were stud­ied by employing $Mantis^{\circledR}$, $AFIS^{\circledR}$ and HVI Testers. Some of the significant changes in single fiber properties were found to be due to process parameters as well as the changes in the fiber crimps, parallelness of fibers within HVI beards, and the actual changes in the tensile properties of the fibers. The study showed that the HVI test data taken just prior to spinning had the highest correlation with the yam tensile properties. Based on the study results, we point out the potential of HVI for future quality and process control in spinning by recommending a set of expanded HVI output that is more scientific and compre­hensive for the future control needs.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.27-34
• /
• 2000

This paper deals with speech enhancement methods using the wavelet transform. A cycle-spinning scheme and undecimated wavelet transform are used for denoising of speech signals, and then their results are compared with that of the conventional wavelet transform. We apply soft-thresholding technique for removing additive background noise from noisy speech. The symlets 8-tap wavelet and pyramid algorithm are used for the wavelet transform. Performance assessments based on average SNR, cepstral distance and informal subjective listening test are carried out. Experimental results demonstrate that both cycle-spinning denoising(CSD) method and undecimated wavelet denoising(CWD) method outperform conventional wavelet denoising(UWD) method in objective performance measure as welt as subjective listening test. The two methods also show less "clicks" that usually appears in the neighborhood of signal discontinuities.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.129-138
• /
• 2006

The motion of a spinning table-tennis ball is investigated in both theory and experiment. The equation of motion of spinning table-tennis ball is made using aerodynamics and calculated by C++ program In theoretical part, gravity, drag force and lift force are regarded as main force. Velocity, angular velocity, mass and Drag and lift coefficients are considered as a independent variable. Experiments are made by a digital stroboscope, a digital camera and a mirror, and snap multi-exposed images were took as a dependent result In experimental part, both magnitude and direction of velocity and angular velocity are changed in each situation. The predicted three-dimensional trajectories of spinning balls are compared with experimental trajectories. As a result the theoretical trajectories were predicted within 10% of experimental trajectories.

• Fibers and Polymers
• /
• v.1 no.2
• /
• pp.92-96
• /
• 2000

A high molecular weight polyhydroxyamide (PHA) solution in N, N-dimethyl acetamide (DMAc) was prepared from 3, 3'-dihydroxybenzidine and isophthalic chloride (IPC), which was used for spinning PHA fiber. Before spinning, the diffusion property of DMAc into various coagulants was examined. The fiber was well formed in coagulants such as water/ethanol with a composition of 5/5, ethanol, and ethanol/isopropanol with a composition of 7/3 and 5/5. However, the PHA fiber spun in the water/ethanol mixture contained voids. After the fiber spun in ethanol was annealed at over $350^{\circ}C$, the ultimate stress and initial modulus of the fiber increased from 75.5 MPa and 3.22 GPa to 369 MPa and 29.5 GPa, respectively. These properties of the PHA fiber spun by the dry spinning method were also enhanced, attaining 154 MPa and 5.56 Gpa, respectivel.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.482-487
• /
• 2001

Time responses of a flexible spinning disk of which axis of symmetry is misaligned with the axis of rotation are analyzed in a numerical manner. Equations of motions are derived by Hamilton's principle based on Kirchhoff plate theory and von-Karman strain theory, and the equations are discretized by finite element method. In obtaining the time responses, Generalized-$\alpha$ method is used to solve the equations. Based on the result, the effects of the misalignment are analyzed on the vibration characteristics of a spinning disk.