• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.315-316
• /
• 2011

This paper presents speed control scheme of the PMSM which has torque compensator to reduce the speed error and ripple. The proposed speed controller is based on the conventional PI control scheme. But the additional torque compensator which is different to the conventional differential controller produces a compensation torque to suppress speed ripple. In order to determine the proper compensation, the activation function which has discrete value is used in the proposed control scheme. With the proposed activation function, the compensation torque acts to suppress the speed error increasing. The proposed speed control scheme is verified by the computer simulation and experiments of 400[W] PMSM. In the simulation and experiments, the proposed control scheme has better control performance compare than the conventional PI and PID control schemes.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.13-22
• /
• 2003

Train speed and infiltration of rainfall causes railway embankment to be unstable and may result in failure. Therefore, the variation in the safety factor of railway embankment should be analyzed as the function of rainfall intensity, rainfall duration, and train speed and the study is accomplished using numerical analysis program. Based on unsaturated soil engineering, the variables in the shear strength function and permeability function are also defined and used for the numerical model for evaluation of railway embankments under rainfall. As a result of the study, in order to secure the safety of train under rainfall, the variation in the safety factor of railway embankment is predicted as the function of rainfall intensity, duration time and the train load as a function of train speed. It is possible to ensure the safety of train under rainfall. Thereafter, the feasibility of the rail-transport operation control with engineering basis was established.

• Ocean Systems Engineering
• /
• 제6권4호
• /
• pp.305-324
• /
• 2016

Wave load prediction at zero forward speed using finite depth Green function is a well-established method regularly used in the offshore and marine industry. The forward speed approximation in deep water condition, although with limitations, is also found to be quite useful for engineering applications. However, analysis of vessels with forward speed in finite water depth still requires efficient computing methods. In this paper, a method for analysis of wave induced forces and corresponding motion on freely floating three-dimensional bodies with low to moderate forward speed is presented. A finite depth Green function is developed and incorporated in a 3D frequency domain potential flow based tool to allow consideration of finite (or shallow) water depth conditions. First order forces and moments and mean second order forces and moments in six degree of freedom are obtained. The effect of hull flare angle in predicting added resistance is incorporated. This implementation provides the unique capability of predicting added resistance in finite water depth with flare angle effect using a Green function approach. The results are validated using a half immersed sphere and S-175 ship. Finally, the effect of finite depth on a tanker with forward speed is presented.

• 자동차안전학회지
• /
• 제7권4호
• /
• pp.26-30
• /
• 2015

Exceeding the speed limit during vehicle driving is a key factor in the severity of lots of road accidents, and SLIF(Speed Limit Information Function) application is in the initial phase in Korea. SLIF helps the drivers to observe a speed limit when they are driving by providing alert and informing the current limit speed information based on external data using camera and/or digital map, for that reason, environmental conditions could be causes of SLIF malfunctions. In this study, design adequacy analysis of SLIF in respect of false recognition as the Korea traffic environment has been performed. As tentative results, road conditions and structure of speed limit sign as well as system performance often caused misrecognition.

• International Journal of Railway
• /
• 제3권3호
• /
• pp.90-94
• /
• 2010

In this paper, driving functions of the Korea High-speed Trains were decomposed based on systems engineering architecture. In order to analyze the driving function, various systems engineering tools and methods were used. Moreover, interfaces of decomposed driving functions were analyzed to figure out purposes of the driving functions. Through activity modeling of driving function of the Korea High-Speed Trains, main functions were derived when starting, speeding and stopping. When the high speed train is speeding, pre-departure checks and wheel slide prevention are essential driving activities for the safety and when the high speed train runs high speed, maintaining driving stability by monitoring bogie hunting and monitoring drivers' safe operation by vigilance systems is important. Furthermore, when the train is braking, the driver should checks brake and suspensions as safety actions.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권1호
• /
• pp.37-46
• /
• 2004

A novel rotor speed estimation method using model reference adaptive control(MRAC) is proposed to improve the performance of a sensorless vector controller. In the proposed method, the stator current is used as the model variable for estimating the speed. In conventional MRAC methods, the relation between the two model errors and the speed estimation error is unclear. In the proposed method, the stator current error is represented as a function of the first degree for the error value in the speed estimation. Therefore, the proposed method can produce a fast speed estimation. The robustness of the rotor flux-based MRAC, back EMF-based MRAC, and proposed MRAC is compared based on a sensitivity function about each error of stator resistance, rotor time constant, mutual inductance. Consequently, the proposed method is much more robust than the conventional methods as regards errors in the mutual inductance, stator resistance. Therefore, the proposed method offers a considerable improvement in the performance of a sensorless vector controller at a low speed. In addition, the superiority of the proposed method and the validity of sensitivity functions were verified by simulation and experiment.

• 대한물리의학회지
• /
• 제11권4호
• /
• pp.71-78
• /
• 2016

PURPOSE: The purpose of this study was to investigate which treadmill walking training mode is more effective strategy for improving pulmonary function of persons with chronic stroke. METHODS: Twenty-one chronic stroke patients were allocated and randomly to an experimental group (treadmill training with randomized speed control, n=11) and a control group (treadmill training without speed change, n=10). All participants received 30 minutes of neurodevelopmental treatment. In addition, the two groups performed treadmill training for 20 minutes each time with or without speed change. Speed change was applied 40%, 50%, 60%, 70% of Heart Rate Reserve. All the exercise programs lasted six weeks, with five times per week. Pulmonary function was assessed before and after exercise program by using forced vital capacity (FVC), forced expiratory volume in one second (FEV1), and maximal voluntary ventilation (MVV). RESULTS: In the both groups, FEV1 was significantly increased after training (p<.05). Compared to the control group, the experimental group showed 11.9% larger amount of change (p<.05). In the experimental group, FVC and MVV were significantly increased after training (9.9%, 7.6%, respectively) (p<.05). But in the control group, there was no significant difference in the FVC and MVV after training. CONCLUSION: Treadmill training with randomized speed control will be a better positive rehabilitation program than treadmill training without speed change to improve pulmonary function in persons with chronic stroke.

• 대한기계학회논문집A
• /
• 제28권3호
• /
• pp.222-229
• /
• 2004

In this paper, the torque of CNC spindle motor during machining is estimated without speed measuring sensor. The CNC spindle system is divided into two parts, the induction spindle motor part and mechanical part. In mechanical part, the variation of the frictional force due to the increment of the cutting torque and the effect of damping coefficient is investigated. Damping coefficient is found to be a function of spindle speed and not influenced by the weight of the load, while frictional force is a function of both the cutting torque and spindle speed. Experimental equations are drawn for damping coefficient and Coulomb friction as a function of spindle speed. Incremental frictional torque Is also obtained as a function of both cutting torque and spindle speed. Graphical programming is used to implement the suggested algorithm to monitor the torque of an induction motor in real time. Torque of the spindle induction motor is estimated well in about average 3% error range under various cutting conditions.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제56권4호
• /
• pp.387-405
• /
• 2017

The purpose of this study is to investigate the change of students 'perception and expression about the motion of object following distance function $={x \atop 3}$ and distance function $y=\frac{x^3}{3}+3$ according to the necessity of research on students' perception and expression about integral constant. In this paper, we present the recognition and the expression of the difference of the constant in the relationship between the distance function and the speed function of the students, while examining the process of constructing the speed function and the inverse process of the distance function. This provides implications for the relationship between the derivative and the indefinite integral corresponding to the inverse process. In particular, in a teaching experiment, a constructive activity was performed to analyze the motion of two distance functions, where the student had a difference of the constant term. At this time, the students used the expression 'starting point' for the constants in the distance function, and the motion was interpreted by using the meaning. This can be seen as a unique 'students' mathematics' in the process of analyzing the motion of objects. These scenes, in introducing the notion of the relation between differential and indefinite integral, it is beyond the comprehension of the integral constant as a computational procedure, so that the learner can understand the meaning of the integral constant in relation to the motion of the object. It is expected that it will be a meaningful basic research on the relationship between differential and integral.

• 중환자간호학회지
• /
• 제14권1호
• /
• pp.50-62
• /
• 2021

Purpose : This study examined the effects of an integrated management program on physical function, cognitive function, and depression in patients with subacute stroke. Methods : A nonequivalent control group design was adopted. The participants were assigned to either the experimental group (n=20) or control group (n=23). The experimental group received an 8-week integrated management program and standard rehabilitation service (i.e., physical therapy and occupational therapy), while the control group received the standard rehabilitation service only. Physical function was measured as gait speed and balance ability using the Berg Balance Scale (BBS). Cognitive function was measured with neuro-behavioral cognitive status examination (NCSE), and depression was measured using the Beck Depression Inventory-II (BDI-II). Repeated measure ANOVA was used to determine changes in physical function, cognitive function, and depression over 8-weeks. Results : The interaction between group and time was significant, indicating that the experimental group showed improvement in gait speed, balance ability, cognitive function (linguistic ability, linguistic memory, reasoning), and a decrease in depression compared to the control group. Conclusion : These results indicate that the integrated management program developed herein was beneficial in restoring physical function, cognitive function, and depression in subacute stroke patients.