• Journal of the Korean Vacuum Society
• /
• v.16 no.1
• /
• pp.40-45
• /
• 2007

ZnCdSe alloy semiconductor was widely used for the optoelectronic device. And CdSe is the end-point in this material. In this work, we measured the dielectric function spectrum of cubic CdSe with Vacuum Ultra Violet spectroscopic ellipsometry and analysed this data with parametric model. As a result, we observed some of transition energy point over 6 eV and obtained the database for dielectric function spectrum, which could be used for temperature or alloy composition dependence study on optical property of CdSe.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.60-65
• /
• 2009

We performed a study on optical properties of $BaSm_2Ti_4O_{12}$ thin films by vacuum ultra violet spectroscopic ellipsometry in the $0.92{\sim}8.6\;eV$ energy range. For the analysis of the measured ellipsometric spectra, a 5-layer model was applied where optical property of the $BaSm_2Ti_4O_{12}$ layer was well represented by a Tauc-Lorentz dispersion function. Our analysis clearly showed new structure in high energy region at about 7.5 eV Consistent changes of refractive index & extinction coefficient of the $BaSm_2Ti_4O_{12}$ thin film by the growth and annealing temperatures were also confirmed.

• Current Optics and Photonics
• /
• v.5 no.3
• /
• pp.278-288
• /
• 2021

We propose a characterization method for the scattering property of microspheres using spectroscopic optical coherence tomography (OCT). To prove the effectiveness of the proposed method, we prepare solutions of different concentrations using microspheres ranging from 28 to 2300 nm in diameter. Time-frequency analysis is performed on the measured interference spectrum of each solution, and the resulting spectroscopic information is converted into histograms for centroid wavelengths. The histograms present a very sensitive response to changes in the concentration and size of microspheres. We classify them into three categories according to their characteristics. When the histogram of each category is replaced with the corresponding calculated value of the scattering coefficient, each category is mapped to a different scattering-coefficient region. It is expected that the proposed method could be used to investigate the optical characteristics of a biological sample from OCT images, which would be helpful for optical diagnostic and therapeutic applications.

• Journal of Korean Vacuum Science & Technology
• /
• v.5 no.2
• /
• pp.52-55
• /
• 2001

We report best dielectric function of ZnS by spectroscopic ellipsometry in the 3.7 - 6.0 eV photon energy range at room temperature. Using proper wet chemical etching procedure, natural overlayer was removed to obtain the pure dielectric function of ZnS, which had a higher <$\xi$$_2$> value at the El band gap peak than that previously reported. We also determined the dielectric property of the natural overlayer on ZnS by following the evolution of <$\xi$$_2$> with chemical etching. We found that the optical property of the overlayer was well described by amorphous semiconductor model.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.18 no.2
• /
• pp.77-105
• /
• 2014

Medical imaging techniques have evolved to expand our ability to visualize new contrast information of electrical, optical, and mechanical properties of tissues in the human body using noninvasive measurement methods. In particular, electrical tissue property imaging techniques have received considerable attention for the last few decades since electrical properties of biological tissues and organs change with their physiological functions and pathological states. We can express the electrical tissue properties as the frequency-dependent admittivity, which can be measured in a macroscopic scale by assessing the relation between the time-harmonic electric field and current density. The main issue is to reconstruct spectroscopic admittivity images from 10 Hz to 1 MHz, for example, with reasonably high spatial and temporal resolutions. It requires a solution of a nonlinear inverse problem involving Maxwell's equations. To solve the inverse problem with practical significance, we need deep knowledge on its mathematical formulation of underlying physical phenomena, implementation of image reconstruction algorithms, and practical limitations associated with the measurement sensitivity, specificity, noise, and data acquisition time. This paper discusses a number of issues in electrical tissue property imaging modalities and their future directions.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2012.05a
• /
• pp.47-48
• /
• 2012

• Journal of the Optical Society of Korea
• /
• v.18 no.4
• /
• pp.350-358
• /
• 2014

The collapse of Langmuir monolayers of arachidic acid (AA) on water at various rates of molecular area compression has been investigated in situ by imaging ellipsometry (IE). The thickness of the collapsed AA molecules, which are inherently inhomogeneous, was determined by IE with a spatial resolution of a few microns. For the analysis, we determined the dielectric function of AA monolayers from 380 to 1690 nm by conventional spectroscopic ellipsometry. Compression rates ranged from 0.23 to $0.94{\AA}^2/min$. A change of multilayer domains was observed in the in situ IE images. Lower compression rates resulted in more uniform collapsed films. Our experimental results correspond with previous theoretical simulations.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.666-672
• /
• 1996

The optical property of CdTe thin film is important for applications such as the compound semiconductor type solar cells. CdTe films are prepared by RF sputtering at various substrate temperature between $25^{\circ}C$ and $300^{\circ}C$, then, annealed in argon gas environment at $400^{\circ}C$. The annealing process of the thin film caused variation in the film structure and the composition of films. The deformation of CdTe thin film was observed by X-ray diffractometry. After annealing, the grain size increased and the portion of the non-crystalline CdTe reduced. Futhermore, the structure of sputtered CdTe film grown at the substrate temperature more than $250^{\circ}C$ was enhanced in the (111) direction of zincblend structure. There was a discrepancy, in the spectroscopic ellipsometer spectrum, between the single crystal CdTe and the sputtered CdTe thin films, especially in the region over 3.2eV. An oxidation layer was found on the CdTe thin film by spectroscopic ellipsometry analysis.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.57.1-57.1
• /
• 2012

We present a spectroscopic study of the globular clusters (GCs) in the giant elliptical galaxy (gE) M86 in the Virgo galaxy cluster. Using the spectra obtained from the Multi-Object Spectroscopy (MOS) mode of Faint Object Camera and Spectrograph (FOCAS) on the Subaru Telescope, we measured the radial velocities of 25 GCs, the metallicities of 16 GCs, and the ages of 8 GCs in M86. The mean velocity and the vocity dispersion of the GCs are < ${\upsilon}_p$ > = -354 ${\pm}$ 80 km/s and ${\sigma}_p$ = 292 ${\pm}$ 32km/s, respectively. The M86 GC system shows some rotation with a large uncertainty and the velocity dispersion of the blue GC system is 60 km/s larger than that of the red GC system. The mean metallicity and age of M86 GCs are <[Fe/H]> = -1.13 ${\pm}$ 0.47 and = 9.7 ${\pm}$ 4.0 Gyr, respectively. We found one GC younger than 5 Gyr. We discuss the spectroscopic results of the M86 GC system in comparison with the GC systems in other gEs.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.272-278
• /
• 2003

We studied patterned ITO layers of PDP thin films on glass substrates using spectroscopic ellipsometry. The optical property of ITO is expressed with the optical model based on two Lorentz oscillators. The effect of patterned ITO is calculated by taking the weighted average of reflectance in proportion to ITO coverage. The relative coverage of ITO is determined by using the model analysis of spectroellipsometric data. The difference of ITO coverage obtained by the best-fit model analysis of ellipsometric spectra to the expected one is critically examined and suggestions are made to minimize the observed discrepancy.