• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.445-449
• /
• 1997

The complex refractive indices of $Ge_2Se_2Te_5$ which show reversible phase change between the crystalline phase and an amorphous one depending upon the annealing process have been determined in the spectral range of 0.7-4.5 eV. The $Ge_2Se_2Te_5$ films were DC sputter deposited on the crystalline silicon substrate. The spectro-ellipsometry data of a thick film were analyzed following the modelling procedure where the quantum mechanical dispersion relation were used for the complex refractive indices of both the cryastalline phase $Ge_2Se_2Te_5$ and and amorphous phase $Ge_2Se_2Te_5$, respectively. On the other hand, with the surface micro-roughness layer whose effective thickness was determined from AFM analysis, the spectro-ellipsometry data were numerically inverted to yield the complex refractive index of $Ge_2Se_2Te_5$ at each wavelength. With these set of complex refractive indices, the reflectance spectra were calculated and those spectra obtained from the numerical inversion showed better agreement with the experimental reflection spectra for both the cryastalline phase and an amorphous phase. Finally, the thin $Ge_2Se_2Te_5$ film which has the optimum thickness of 26 nm as the medium for optical recording was also analyzed and the quantitative result of the film thickness and the surface microroughness has been reported.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.181-187
• /
• 1999

We prepared the side-chain type nonlinear optical NPP(N-(6-nitrophenyl)-(L)-prolinol) polymer films by spin coating method. Ellipsometric spectra were in situ collected by using spectroscopic phase modulated ellipsometer while the NPP polymer films were being corona poled at the temperature above glass transition. We calculated film thickness and the refractive index dispersion by modeling the spectro-ellipsometry data in transparent region. We also calculated the refractive index and the extinction coefficient of the polymer films by numerically inverting the spectro-ellipsometry data in absorbing region, while the previously determined film thickness was used. The independently determined extinction coefficient spectra from the analysis of transmission spectra were compared with those by spectro-ellipsometry and they showed an excellent agreement with each other. From the analysis of the complex refractive index change of the NPP polymer thin films induced by the corona poling, we could determine the vertical complex refractive index and the horizontal complex refractive index separately. Using the volume fraction of the vertical component f⊥, the degree of poling of poled NPP polymer films was quantitatively addressed. It is suggested that the present method can be used to quantitatively address the degree of poling in an absolute manner and to depth profile the poled fraction of thick polymer films. It will be useful to understand the structural change of polymer films and hence the poling mechanism during the poling process.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.138-147
• /
• 2008

$SiO_2/TiO_2/ZrO_2$ broadband anti-reflective multi-layer thin films were prepared at room temperature by RF sputtering system. Optical constants and structural properties on each layer of films were analyzed by spectroscopic ellipsometer and transmittance spectra of the films were measured by $UV-V_{is}$ spectrophotometer in the range of 300$\sim$900 nm. To evaluate the films, we compared the measured and analyzed spectra with designed spectra. We investigated influence of discrepancy of thickness and refractive indices of each layer on changes of the transmittance spectra. It was found that refractive indices and shape of dispersion of deposition materials are more contributed to changes of the transmittance spectra than thickness of layer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.17-17
• /
• 1998

Synchrotron radiation is produced when charged particles moving with relativistic velocities a are accelerated - for example, deflected by the bending magnets which guide the electron or p positrons in circular accelerators or storage rings. By using special focusing magnetic lattices i in the particle accelerators it is possible to make the dimensions of the particle beam very small with a hi맹 charge density which results in a light source with high b디lIiance. Synchrotron light h has important properties which make it ideal for a wide range of investigations in surface s science. The fact that the spectrum of electromagnetic radiation emitted in a bending magnet e extends in a continuum from the 얹r infra red region to hard x-rays means that it is id않I for a v variety of spectroscopic studies. Since there are no convenient lasers, or other really bright l light sources, in the vacuum ultraviolet and soft x-ray re.밍ons the development of synchrotron r radiation has enabled enormous advances to be made in this di펌C비t spectr따 re밍on. P Polarization-dependent measurements, for ex없nple ellipsometry or circular dichroism studies a are possible because the radiation has a well-defined polarization - linear in the plane of orbit w with additional right-circular, or left-circular, components for emission an생es above, or below, t the horizontal, respectively. Since the synchrotron light is emitted from a bunch of charge c circulating in a ring the light is emitted with a well-defined time structure with a short flash of l light every time a bunch passes an exit port. The time structure depends on the size of the ring a and the number and sequence of filling of the bunches. A pulsed light source enables time¬r resolved studies to be performed which provide direct information on the lifetimes and decay m modes of excited states and in addition opens up the possibility of using time of flight t techniques for spectroscopic studies. The fact that synchrotron radiation is produced in a clean u ultrahi야 vacuum environment is of gr않t importance for surce science studies. The current t비rd generation synchrotron light sources provide exceptionally high baliance and stability a and open up possibilities for experiments which would have been inconceivable only a short time ago.

• Journal of Magnetics
• /
• v.11 no.1
• /
• pp.12-15
• /
• 2006

Magnetic and electronic properties of reduced rutile titanium dioxide $(TiO_{2-\delta})$ thin films doped by Mn have been investigated. The present sol-gel-grown semiconducting $TiO_{2-\delta}:Mn$ films exhibit a ferromagnetic behavior at room temperature for a limited range of Mn content. The Mn-doped films have p-type electrical conductivity with the carrier concentration near $10^{19}\;cm^{-3}$. The observed room-temperature ferromagnetism is believed to be intrinsic but not related to free carriers such as holes. Oxygen vacancies are likely to contribute to the room-temperature ferromagnetism-trapped carriers in oxygen vacancies can mediate a ferromagnetic coupling between neighboring $Mn^{+3}$ ions. The energy band-gap change due to the Mn doping measured by spectroscopic ellipsometry exhibits a red-shift compared to that of the undoped sample at low Mn content. It is explainable in terms of strong spin-exchange interactions between Mn ion and the carrier.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.165-165
• /
• 2012

비정질의 Tantalum-indium-zinc oxide (TIZO) 박막 트랜지스터는 RF-sputtering 방법으로 증착되었으며 소결된 단일 타겟을 사용하였다. 증착당시 반응 가스는 알곤과 산소를 95 : 5로 섞어 반응성 스퍼터링을 진행하였으며, 1 mtorr에서 5 mtorr까지 다양한 공정압력에서 증착한 이 후 Furnace system을 통하여 $350^{\circ}C$의 온도로 1시간 동안 후열처리 공정을 진행하였다. 비정질 TIZO 박막을 활성 층으로 사용하여 제작한 박막 트랜지스터는 공정압력이 낮아짐에 따라 높은 이동도와 낮은 subthrehsold gate swing 보였다. 이러한 현상의 원인을 규명하고자 물리적, 전기적, 광학적 분석을 통하여 공정압력의 변화가 박막 트랜지스터 구동에 미치는 영향을 해석하였다. 우선 공정압력에 따른 TIZO 박막의 Ta, In, Zn, O 각각의 조성을 분석하기 위하여 Rutherford back scattering (RBS) 분석을 실시하였다. 또한 X-선 회절(X-ray diffraction)분석을 통해 열처리된 TIZO 박막은 공정압력에 따라 물리적 구조의 변화를 일으키지 않으며 모든 박막은 비정질상을 보이는 것을 확인하였다. 3.3eV의 광학적 밴드 갭은 기존에 보고되었던 비정질 산화물 반도체(InGaZnO, HfInZnO 등)와도 유사한 밴드갭을 가지고 있음을 확인하였다. 또한, spectroscopic ellipsometry (SE)분석을 통하여 전도대 이하 밴드 갭 내에 존재하는 결함상태 및 전도대에서 결함상태까지의 에너지 준위 그리고 공정압력에 따라 결함의 양과 발생되는 에너지 준위가 변화하는 현상을 관측하였다. 박막을 제조 할 때의 공정압력은 박막 내의 결함의 양 및 발생되는 에너지 준위의 변화를 야기하고 변화된 결함의 양과 발생된 에너지 준위에 따라 박막트랜지스터의 전기적 특성을 변화시킨다는 결과를 도출하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.167-167
• /
• 2012

Aluminium-zinc-tin oxide (AZTO) 박막 트랜지스터는 Spin-coating 방법으로 제작되었다. AZTO용액의 용매는 2-Methoxyethanol, 용질은 각각 Aluminium nitride, Zinc acetate dihydrate, Tin chloride가 사용되어 제작되었다. 용액의 안정성을 위해서 미량의 Mono ethyl amine이 첨가되었다. 용액의 Zn:Sn의 몰 비율은 1 : 1로 고정 되었으며 Al의 mole비를 다양하게 늘리면서 실험을 진행하였다. 이렇게 만들어진 AZTO용액은 3,000 rpm으로 30초간 Spin-coating하였으며 이후 Furnace system을 통하여 $500^{\circ}C$의 온도로 1시간 동안 후열처리 공정을 진행하였다. AZTO박막을 활성층으로 제작된 박막 트랜지스터는 Al의 비율이 늘어남에 따라 처음엔 이동도가 증가하였으나 이후 이동도가 낮아지며 소자특성이 나빠지는 것을 보였다. 이러한 현상의 원인을 알아보고자 물리적, 전기적, 광학적 분석을 통해서 Al양의 변화가 박막트랜지스터 구동에 미치는 영향을 해석하였다. 먼저 AZTO용액은 열중량측정/시차열분석법(Thermo Gravimetry/Differential Thermal Analysis)을 이용하여 spin-coating 이후 후 열처리 온도 결정 및 박막의 변화를 관찰하였으며, X-선 분광(X-ray photoelectron spectroscopy)을 이용하여 박막의 조성 및 전자구조의 변화를, 타원분광해석법(Spectroscopic Ellipsometry)분석을 통하여 밴드 갭과 전도대 이하 밴드 갭 내에 존재하는 결함상태변화를 관찰하였다. AZTO 박막 내의 Al양을 조절하는 것은 박막내의 에너지 준위의 변화를 야기하고 그로인해 박막트랜지스터의 특성을 변화킨다는 결과를 도출하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.361-361
• /
• 2012

PZT (Pb(Zr,Ti)O3) thin films have been used widely in the MEMS application, due to their inherent ferroelectric and piezoelectric properties. Such ferroelectricity induces much higher dielectric constants compared to those of the nonperovskite materials. In this work, the PZT thin films were deposited onto Indium-Tin-oxide (ITO) substrates through the spin-coating of PZT sols. The deposited PZT thin films were characterized in terms of the electrical and optical properties with special emphases on conductivity and optical constants. The detailed analysis techniques incorporate the dc-based current-voltage characteristics for the electrical properties, spectroscopic ellipsometry for optical characterization, atomic force microscopy for surface morphology, X-ray Photoelectron Spectroscopy for chemical bonding, Energy-dispersive X-ray Spectrometry for chemical analyses and X-ray diffraction for crystallinity. The ferroelectric phenomena were confirmed using capacitance-voltage measurements. The integrated physical/chemical features are attempted towards energy-oriented applications applicable to next-generation high-efficiency power generation systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.239.2-239.2
• /
• 2016

Numerous studies and approaches have been performed for solar cells to improve their photoelectric conversion efficiencies. Among them, the study for electrode containing transparent conducting oxide (TCO) layers is one of issues as well as for the cell structure based on band theory. In this study, we focused on an interfacial layer between p-type silicon and indium tin oxide (ITO) well-known as TCO materials. According to current-voltage characteristics for the sample with the interfacial layers, the improvement of band alignment between p-type silicon and ITO was observed, and their ohmic properties were enhanced in the proper condition of deposition. To investigate cause of this improvement, spectroscopic ellipsometry and ultraviolet photoelectron spectroscopy were utilized. Using these techniques, band alignment and defect in the band gap were examined. The major materials of the interfacial layer are vanadium oxide and tungsten oxide, which are notable as a hole transfer layer in the organic solar cells. Finally, the interfacial layer was applied to silicon solar cells to see the actual behavior of carriers in the solar cells. In the case of vanadium oxide, we found 10% of improvement of photoelectric conversion efficiencies, compared to solar cells without interfacial layers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.196.2-196.2
• /
• 2015

There are various issues fabricating the successful and efficient solar cell structures. One of the most important issues is band alignment technique. The solar cells make the carrier in their active region over the p-n junction. Then, electrons and holes diffuse by minority carrier diffusion length. After they reach the edge of solar cells, there exist large energy barrier unless the good electrode are chosen. Many various conductor with different work functions can be selected to solve this energy barrier problem to efficiently extract carriers. Tungsten oxide has large band gap known as approximately 3.4 eV, and usually this material shows n-type property with reported work function of 6.65 eV. They are extremely high work function and trap level by oxygen vacancy cause them to become the hole extraction layer for optical devices like solar cells. In this study, we deposited tungsten oxide thin films by sputtering technique with various sputtering conditions. Their electrical contact properties were characterized with transmission line model pattern. The structure of tungsten oxide thin films were measured by x-ray diffraction. With x-ray photoelectron spectroscopy, the content of oxygen was investigated, and their defect states were examined by spectroscopic ellipsometry, UV-Vis spectrophotometer, and photoluminescence measurements.