• 한국구조물진단유지관리공학회 논문집
• /
• 제16권5호
• /
• pp.49-58
• /
• 2012

이 연구에서는 순환굵은골재를 사용한 철근콘크리트 보의 휨거동을 평가한다. 이를 위하여 골재의 종류와 흡수율이 서로 다른 3개의 실험체를 제작하였다. 모든 실험체는 4점 가력을 받도록 계획하였으며, 전단의 영향이 크도록 전단경간비를 2.5로 계획하였다. 실험체의 모멘트-곡률 관계를 예측하기 위하여 인장증강효과를 고려한 비선형 휨해석을 수행하였으며, 실험체의 전체 거동을 평가하기 위하여 전단의 영향을 고려할 수 있는 비선형 유한요소해석을 수행하였다. 실험결과, 흡수율 6%의 순환굵은골재를 사용한 실험체의 휨강도와 균열특성은 천연골재를 사용한 실험체와 서로 유사함을 확인할 수 있었다. 그리고 실험결과와 해석결과를 비교한 결과, 기존 해석방법을 이용하여 순환굵은골재를 사용한 철근콘크리트 보의 거동을 타당하게 예측할 수 있음을 확인할 수 있었다.

• 열처리공학회지
• /
• 제5권2호
• /
• pp.122-132
• /
• 1992

This study has been performed to investigate into some effects of the power density and traverse speed of laser beam on the optical microstructure, hardness and wear characteristics of medium carbon low alloy steel treated by laser surface hardening technique. The results obtained from the experiment are summarized as follows : (1) Optical micrograph has shown that finer lath martensite is formed and the amount of undissolved complex carbides increases as the traverse speed increases under the condition of a given power density, whereas the coarsening of lath martensite and the reduction of undissolved complex carbides occur with increasing the power density at a given traverse speed. (2) Hardness measurements have revealed that as the traverse speed increases, hardness values of outermost surface layer more of less decrease under low power densities, but are uniformly distributed under high power densities, also showing that they are uniformly distributed at low traverse speeds and more or less decrease at high traverse speeds with increasing the power density. (3) The effective case depth has been found to decrease from 0.26 mm to 0.17 mm with increasing the traverse speed from 1.5 m/min to 3.0 m/min at a given power density of $25.48{\times}10^3w/cm^2$ and to increase from 0.20 mm to 0.36 mm with increasing the power density from $19.11{\times}10^3w/cm^2$ to $38.22{\times}10^3w/cm^2$ at a given traverse speed of 2.0 m/min. (4) Wear test has exhibited that the amount of weight loss of laser surface hardened specimen with respect to sliding distance at a given load increases with increasing traverse speed at a given power density and decreses with increasing power density at a given traverse speed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.35-38
• /
• 2006

This study investigated fundamental properties of lightweight foamed concrete using cement kiln dust (CKD) and both fly ash(FA) and stability agent. Test results showed that concrete incorporating more amounts of admixture decreased slump flow and it caused increase of superplasiticizer in order to secure the fluidity performance. In addition concrete adding stability agent showed stable flow state, resisting segregation of materials and decreasing bleeding capacity. Sinking depth of concrete incorporating 20% of CKD and adding 0.002% of stability agent was indicated at 0mm. For the properties of hardened concrete. compressive strength of concrete incorporating CKD declined due to a lower appearance density, compared with other specimens. The difference of that was not very significant and the value of ail specimen was higher than KS range. Moreover strength of concrete incorporating CKD was even higher at curing temperature $5^{\circ}C$. Tensile strength ratio of concrete incorporating CKD was indicated between 0.50 to 0.59, which is higher value than control concrete. Heat conductivity of concrete incorporating FA was under the KS range while concrete incorporating 20% of CKD was satisfied in KS. Concrete adding stability agent improved insulation performance due to the lower heat conductivity. In conclusion, it is possible that concrete incorporating 20% of CKD and adding 0.002% of stability agent can secure high quality of lightweight foamed concrete.

• 한국어류학회지
• /
• 제32권3호
• /
• pp.191-196
• /
• 2020

곰치과에 속하는 Strophidon dorsalis 1개체 (전장 1,254 mm)가 2018년 7월 우리나라 남해안의 진도연안에서 연안통발로 처음 채집되었다. 이 종의 특징은 몸에 무늬가 없고, 주둥이가 약간 둥근 형태를 띠며, 2개의 안상골공 (superorbital pores), 3개의 안하골공 (infraorbital pores), 그리고 6개의 하악골공 (mandibular pores)을 갖는 다. 이 종은 형태적으로 가는곰치 (Strophidon sathete)와 유사하지만 안하골공이 3개이며 (vs. 가는곰치는 4개), 마지막의 안하골공은 눈의 앞부분에 위치하며 (vs. 안하골공이 눈의 뒷부분에 위치), 전장에 대해 체고비율이 3.2~4.1%(vs. 1.8~3.1%), 그리고 척추골수가 154~167개 (vs. 188~200)로 구분할 수 있다. 이 어종의 국명은 '서망곰치'로 제안한다.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.459-473
• /
• 2000

Dental caries is the most common disease in the maxillofacial area. There are many factors contributing to its development, but complete understanding and prevention is not fully known. Since the structure of the coronal and root portion of the tooth is different, the remineralization and demineralization process is also known to be different. In this study, by using a partially saturated buffer solution, we created artificial enamel and dentin caries and evaluated mineral loss. A remineralization solution with four different degrees of saturation (degree of saturation ; group 1, 0.268, group 2, 0.309, group 3, 0.339, group 4, 0.390, PH 4.3, F-2ppm) was used on a demineralized specimen. The mineral precipitating quantity and depth was evaluated by using microradiography. Using an atomic force microscope (AFM), hydroxyapatite crystals of normal, demineralized, and remineralized enamel and dentin were evaluated. The results were as follows: 1. As the degree of saturation of the remineralizing solution increased, the mineral precipitation in the enamel was increased. In group 4, mineral precipitation was limited near the surface. 2. As the degree of saturation of the remineralizing solution increased, the mineral precipitation in the dentin was decreased and it occurred in a deeper portion. In group 4, however, mineral precipitation occurred on the surface and its quantity increased. 3. There was a statistically significant interaction between enamel and dentin mineral content changes on specimens treated with remineralization and demineralization solution (demineralization r=0.44, remineralization r=0.44, p<0.05). 4. Demineralized hydroxyapatite crystals showed central and peripheral dissolving and widening of intercrystal spaces under the AFM. 5. In dentin remineralization small crystal precipitation occurred between the large crystals. We conclude that by adjusting acidulated buffer solution's degree of saturation, we can control enamel and dentin remineralization. In addition, the AFM is highly useful in evaluating changes in remineralized and demineralized hydroxyapatite crystals.

• 한국어류학회지
• /
• 제20권4호
• /
• pp.318-323
• /
• 2008

인천 연안에서 뱀장어목 바다뱀과 어류 1개체(전장 254.6 mm)가 채집되었다. 한국에서는 미기록 종인 Muraenichthys gymnopterus로 동정되었고, 본종이 포함되는 속(Muraenichthys), 아과(Myrophinae) 역시 한국 미기록으로 확인되었다. 본 종은 아가미구멍이 수축되었고, 체측면의 중앙에 열려있으며, 등지느러미 기부는 항문보다 전방에 위치하고, 아가미구멍보다는 항문에 더 가깝다. 모든 이빨은 끝이 뭉툭하며, 하악치는 띠를 형성하고, 상악치, 하악치, 서골치의 치열은 다열형이다. 세번째 preopercular pore (전새개골공)가 있으며, 전비공과 후 비공 사이에 하나의 infraorbital pore (안하골공)가 있다. 체색은 갈색을 띠고, 아가미구멍에서의 체고에 대한 전장은 43.2배, 체폭에 대하여는 33.7~65.3배, 두장은 눈 지름의 15.0~31.0배이다. 척추골수는 154~161개이다. Subfamily Myrophinae는 "갯물뱀아과", genus Muraenichthys는 "갯물뱀속", M. gymnpopterus는 "갯물뱀"으로 각각 국명을 신칭한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.625-628
• /
• 2008

본 연구에서는 국내의 대표적인 보수재료인 폴리머시멘트계열의 단면복구재 3종 및 표면보호재 2종에 대해 촉진중성화 시험을 실시하여 국내 보수재료의 중성화 저항성능을 평가하였다. 기존의 KS 시험규격인 침투깊이 측정법과 함께 유럽시험규격인 BS EN 1062-6에서 규정한 등가공기층 확산두께산정을 적용하였다. 등가공기층 확산두께($S_D$)란 코팅재와 동일한 이산화탄소투과성과 동일한 조건을 가지고 있는 부동 공기층의 두께로서, 시편을 할렬 파괴하지 않으므로 동일한 시편으로 연속적인 시험을 진행할 수 있다는 장점이 있다. 시험결과 단면복구재의 경우 중성화깊이 측정법을 통해 이산화탄소 투과저항성을 평가할 수 있는 반면 표면보호재의 경우에는 이산화탄소 투과량 측정을 통한 등가공기층 두께 산정법이 효과적인 이산화탄소 투과저항성능 평가방법임을 밝혔다.

• 한국재난정보학회 논문집
• /
• 제13권4호
• /
• pp.455-464
• /
• 2017

I형 강거더의 압축부에 SUPER(Sustainable Ultra performing, Pioneering, Economic, Remarkable) Concrete가 합성된 거더의 휨거동 특성을 평가하기 위해 정적재하시험을 수행하였다. 실험체는 총길이 25m, 형고 786mm이고 압축부 콘크리트(이하 케이싱) 강도는 80MPa이며 4점 재하로 하중 2,010kN까지 가력하여 휨거동을 분석하였다. 실험 결과 사용 하중의 2.7배에서 인장 플랜지가 항복하였고 연성비는 1.481였다. 실험 종료까지 케이싱 균열은 확인되지 않았으며 단면 간 상대변위량은 미미한 수준임을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제18권1호
• /
• pp.114-121
• /
• 1993

The purpose of this study was to evaluate the effect on treatment methods to shear bond strength between composite resin and amalgam when the alloy surface was finished with a diamond wheel or an sandblaster. Forty round acrylic cylinders were fabricated with a diameter of 33mm and a height of 20mm to fit into the device used during shear bond strength testing. A round undercut cavity (diameter, 8mm: depth, 2.5mm) was prepared in the center of the acrylic surface and the cavity was restored using a amalgam. A total of 40 acrylic cylinders with amalgam were divided into 4 groups according to treatment method. The group treatment were as follows : Group 1 : acid etching after finishing the amalgam with diamond wheel Group 2 : no acid etching after finishing the amalgam with diamond wheel Group 3 : acid etching after sandblasting the amalgam Group 4 : no acid etching after sandblasting the amalgam The shear bond strength of composite resin bonded to amalgam of each specimen was tested with a universal testing machine at a crosshead speed of 0.5mm/min and 500kg in full scale. The results were as follow: 1. After diamond finishing, the non-acid etching group had highest shear bond strength with 7.29kg/$cm^2$ and after sandblasting, the acidetching group had lowest shear bond strength with 4.49kg/$cm^2$. 2. In both diamond finishing and sandblasting group, acid etching of the roughened amalgam surface decreased the shear bond strength. 3. The group treated with a diamond wheel had higher shear bond strength those treated with an sandblaster but there was not significanat.

• Archives of Plastic Surgery
• /
• 제38권5호
• /
• pp.609-615
• /
• 2011

Purpose: Dermatofibrosarcoma protuberans is a relatively rare tumor that originates from the dermis and subcutaneous tissue. It is generally known that this tumor easily recurs but can be successfully treated with a wide excision. Therefore, this study was conducted to investigate postoperative outcomes and risk factors for recurrence in patients with dermatofibrosarcoma protuberans who were treated at a single institution for 20 years. Methods: We retrospectively reviewed the medical records of 35 patients who had underwent surgery between June 1992, and September 2010. The patients were assessed in terms of predilection site and size of the tumor, the incidence according to sex, discrepancy between biopsy results and histopathological diagnosis of the surgical specimen, additional treatment after recurrence, recurrence rate and the time interval to recurrence. Results: In multivariate analysis, the depth and site of the tumor were significant risk factors for tumor recurrence. The recurrence rate was significantly higher in tumors occurring in the upper extremity than those occurring in other regions ($p$=0.0348). In addition, the recurrence rate was significantly higher in tumors with involvement of the fascia and the deeper structures ($p$=0.0324, odds ratio=6, relative risk=1.588). Since dermatofibrosarcoma protuberans has strong invasiveness, its tissue involvement is difficult to evaluate accurately. Conclusion: The results of this study shows that involvement of the fascia and the deeper structures and occurrence in the upper extremity were associated with tumor recurrence. Therefore, clinicians should be aware of these risk factors to achieve better treatment outcomes.