• 한국농공학회지
• /
• 제38권5호
• /
• pp.116-124
• /
• 1996

The purpose of The work described in this paper is to clear up the initial moisture content, specific surface, air drying and freezing-thawing process on liquid limit of clayey soils distributed widely at estuary of three main rivers in the west coast. To this end, a series of tests were conducted on clayey soils samples with natural state and treated state. From the test results, the liquid limit was decreased with decrement of initial moisture content, air drying process, and freezing-thawing cycles and increased with increment of specific surface. The specific surface which influenced on the liquid limit is over $25 m^2$m$^2$/g, and their relationships are well formulated. Air drying process is expected to improve the engineering properties of the soils such the pro-water properties were changed to anti-water proper-ties through lowering of water holding as resulted to incline from A-7-5 to A-5 on the soil classificaction plastic chart. The freezing-thawing process decreased 20% of liquid limit, especially under the first cycle of the behavious, as a result of above mentioned reasons, phase change of soil-water system brought the decrement of specific surface and affected to the liquid limit.

• Journal of Microbiology and Biotechnology
• /
• 제21권5호
• /
• pp.449-454
• /
• 2011

The infection of pandemic influenza viruses such as swine flu (H1N1) and avian flu viruses to the host cells is related to the following two factors: First, the surface protein such as HA (hemagglutinin) and NA (neuraminidase) of the influenza virus. Second, the specific structure of the oligosaccharide [sialic acid(${\alpha}2$-6) galactose(${\beta}1$-4)glucose or sialic acid(${\alpha}2$-3)galactose(${\beta}1$-4)glucose] on the host cell. After recognizing the specific structure of the oligosaccharide on the surface of host cells by the surface protein of the influenza virus, the influenza virus can secrete sialidase and cleave the sialic acid attached on the final position of the specific structure of the oligosaccharide on the surface of host cells. Tamiflu (oseltamivir), known as a remedy of swine flu, has a saccharide analog structure, especially the sialic acid analog. Tamiflu can inhibit the invasion of influenza viruses (swine flu and avian flu viruses) into the host cells by competition with sialic acid on the terminal position of the specific oligosaccharide on the surface of the host cell. Because of the emergence of Tamiflu resistance, the development of new potent anti-influenza inhibitors is needed. The inhibitors with positive-charge groups have potential as antiviral therapeutics, and the strain specificity must also be resolved.

• 한국전기전자재료학회논문지
• /
• 제31권2호
• /
• pp.112-116
• /
• 2018

Electric double layer capacitors (EDLCs) are promising candidates for energy storage devices in electronic applications. An EDLC yields high power density but has low specific capacitance. Carbon material is used in EDLCs owing to its large specific surface area, large pore volume, and good mechanical stability. Consequently, the use of carbon materials for EDLC electrodes has attracted considerable research interest. In this paper, in order to evaluate the electrochemical performance, graphene is used as an EDLC electrode with flake sizes of 3, 12, and 60 nm. The surface characteristic and electrochemical properties of graphene were investigated using SEM, BET, and cyclic voltammetry. The specific capacitance of the graphene based EDLC was measured in a 1 M $TEABF_4/ACN$ electrolyte at the scan rates of 2, 10, and 50 mV/s. The 3 nm graphene electrode had the highest specific capacitance (68.9 F/g) compared to other samples. This result was attributed to graphene's large surface area and meso-pore volume. Therefore, large surface area and meso-pore volume effectively enhances the specific capacitance of EDLCs.

• 한국세라믹학회지
• /
• 제28권1호
• /
• pp.29-36
• /
• 1991

Microporous glasses in the system TiO2-SiO2-Al2O3-B2O3-CaO-Na2O were prepared by the phase-separation technique. Morphology and distribution of pore and specific surface area of glasses heated and leached out at various conditions were investigated by SEM and Porosimeter. Crystallization of glasses heated above transition temperature was also inspected by X-ray diffraction method. When the heating temperature and time increased, the pore size and volume increased, but the specific surface area decreased above the critical temperature. The phase-separation, specific surface area and pore size showed more sensitive change on the variation of heating temperature than of heating time. The specific surface area and micropore volume of porous glasses prepared in this study were about 120-330$m^2$/g and 0.001-0.01cc/g, respectively. Mean pore size of porous glasses were about 20-90$\AA$. Anatase phases was deposited when the parent glass was heat-treated at 75$0^{\circ}C$ for 6hrs.

• Bulletin of the Korean Chemical Society
• /
• 제16권6호
• /
• pp.498-503
• /
• 1995

The adsorption behaviors of two major components purified, endo Ⅱ and exo Ⅱ, from Trichoderma viride were investigated using microcrystalline cellulose with different specific surface area as substrates. Adsorption was found to apparently obey the Langmuir isotherm and the thermodynamic parameters, ΔH, ΔS, and ΔG, were calculated from adsorption equilibrium constant,K. The adsorption process was found to be endothermic and an adsorption entropy-controlled reaction. The amount of adsorption of cellulase components increased with specific surface area and decreased with temperature and varied with a change in composition of the cellulase components. The maximum synergistic degradation occurred at the specific weight ratio of the cellulase components at which the maximum affinity of cellulase components obtains. The adsorption entropy and enthalpy for respective enzyme system increased with specific surface area increase. The adsorption entropy was shown to have a larger value with enzyme mixture.

• Korean Chemical Engineering Research
• /
• 제57권1호
• /
• pp.133-141
• /
• 2019

침전법으로 환류방법 또는 수열합성법을 이용하여 산 염기점을 갖는 고비표면적 지르코니아를 합성하였다. 제조된 지르코니아는 침전제로 수산화암모늄 수용액을 사용하여 Zr 용액의 pH를 2에서 10 범위 내에서 조절하였으며 질소흡착분석, X-선 회절분석(XRD), 이소프로판올 승온탈착법(IPA-TPD), 주사전자현미경 분석, X-선 광전자분광분석, 산-염기점 분석을 통해 IPA 분해반응의 촉매활성과 연관하여 특성분석을 수행하였다. 환류방법을 사용할 시, tetragonal 상이 높은 지르코니아를 얻기 위해서는 Zr 용액의 pH가 높아야 하며, pH 9 이상에서는 순수한 tetragonal 상의 지르코니아 합성이 가능하였다. 또한, 비표면적이 큰 지르코니아를 얻기 위해서는 높은 pH가 요구되었으며, pH 10에서 합성한 경우에는 $600^{\circ}C$에서 소성 후에도 $260m^2g^{-1}$의 높은 비표면적이 얻어졌다. 하지만 같은 조건 하에서 고압이 수반되는 수열합성에는 $40m^2g^{-1}$ 이하의 매우 낮은 비표면적을 보였으며, monoclinic 상의 지르코니아가 합성되었다. 고 비표면적 tetragonal 상의 지르코니아를 얻기 위해서는 용액의 pH가 가장 큰 영향을 미쳤으며, 용액의 pH와 무관하게 높은 압력이 필요한 수열합성에서는 monoclinic 지르코니아가 생성되었으며 상대적으로 비표면적이 낮게 나타났다. 높은 비표면적과 tetragonal 상을 갖는 지르코니아는 염기점에 비해 산점이 우세하여 IPA 분해반응에서 선택적 탈수반응만 진행되는 프로필렌만 생성되었다.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.323-328
• /
• 2008

During the full-scale water treatment operation at "G" Water Treatment Plant in Seoul, we investigated changes in pore volume distribution and specific surface area of GAC with time. The pore volume of the used GAC decreased to the level below 0.6 cc/g while that of the brand new GAC was ranged 0.7~0.9 cc/g. The specific surface area of GAC pores changed within the range between $1100{\sim}1200m^2/g$ and $700{\sim}800m^2/g$. Bacteria attached to the surface of GAC shows a gradual increase ($0.4{\time}10^6{\sim}8.5{\time}10^6CFU/g$) under scanninig electron microscope (SEM). TOC removal was enhanced due to growth of the attached bacteria on GAC. It was found that TOC removal was closely related with physical parameters (pore volume, specific surface area) linearly under the investigated conditions. The used GAC need to be exchanged into new one or re-generated to remove organic matters (TOC) effectively from the finished drinking water.

• 한국재료학회지
• /
• 제32권2호
• /
• pp.107-113
• /
• 2022

Fibrous supercapacitors (FSs), owing to their high power density, good safety characteristic, and high flexibility, have recently been in the spotlight as energy storage devices for wearable electronics. However, despite these advantages, FCs face many challenges related to their active material of carbon fiber (CF). CF has low surface area and poor wettability between electrode and electrolyte, which result in low capacitance and poor long-term stability at high current densities. To overcome these limits, fibrous supercapacitors made using surface-activated CF (FS-SACF) are here suggested; these materials have improved specific surface area and better wettability, obtained by introducing porous structure and oxygen-containing functional groups on the CF surface, respectively, through surface engineering. The FS-SACF shows an improved ion diffusion coefficient and better electrochemical performance, including high specific capacity of 223.6 mF cm^-2 at current density of 10 ㎂ cm^-2, high-rate performance of 171.2 mF cm^-2 at current density of 50.0 ㎂ cm^-2, and remarkable, ultrafast cycling stability (96.2 % after 1,000 cycles at current density of 250.0 ㎂ cm^-2). The excellent electrochemical performance is definitely due to the effects of surface functionalization on CF, leading to improved specific surface area and superior ion diffusion capability.

• 대한공간정보학회지
• /
• 제6권2호
• /
• pp.133-141
• /
• 1998

지형 모델링은 사각그리드에 의한 방법과 불규칙 삼각망을 이용한 방법으로 나눌 수 있다. 특히 불규칙 삼각망에 의한 방법은 적은 지형 데이터로써 지형의 특징을 잘 표현할 수 있고 렌더링시간을 단축시킬 수 있어 널리 사용되고 있다. 이러한 불규칙 삼각망을 만들기 위해서는 의미점 추출과정과 삼각형화 과정이 필요하다. 본 논문은 이러한 전처리 작업 중 의미점 추출과정의 개선에 중점을 두었다. 의미점을 추출하는 방법에는 8방향 이웃점 검사 방법과 이를 변형한 방법들이 많이 사용되고 있다. 또한 다각형 감소 기법을 응용하여 불필요한 점들을 제거하는 방법도 제안되고 있다. 그중 기본적으로 사용하는 8방향 이웃점 검사 방법을 이용한 의미점 추출 방법은 필요 없는 점들을 추출한다는 문제점을 가지고 있다. 이러한 문제점을 해결하기 위해서 지형 단면을 이용한 의미점 추출방법을 제안한다. 이 방법은 기존의 방법보다 의미점 추출 시간이 빠르고 적은 지형 자료로 보다 정확한 특징점을 추출할 수 없다.

• 마이크로전자및패키징학회지
• /
• 제22권2호
• /
• pp.21-26
• /
• 2015

낮은 열전도도 및 높은 비표면적 특성으로 흡착제 및 가스센서 등 여러 응용 분야로 연구되고 있는 규칙적 메조기공 세라믹 소재는 폐기공 메조기공 구조와 개기공 메조기공 구조로 나뉜다. 이중 폐기공 메조기공 세라믹 소재는 개기공 메조기공 세라믹 소재보다 높은 기계적 특성을 가짐에도 내부에 존재하는 기공을 이용한 비표면적 증가에 한계가 있어 응용에 제약을 가지고 있다. 본 연구팀은 규칙적 폐기공 메조기공 타이타니아($TiO_2$)의 열처리 시간 변화에 따른 입자성장으로부터 폐기공 연결의 도입을 통하여 비표면적을 변화시키는 연구를 수행하고자 하였다. 열처리 시간 증가시 타이타니아 결정상의 변화는 없었으며 입자성장이 일어나게 되면서 기공구조의 무너짐 및 기공의 연결성 증가를 확인할 수 있었다. 24시간 열처리 시료의 경우, 기공률은 36.3%에 34.1%로 감소하였으나 기공의 연결도 증가로 인해 비표면적은 $48m^2/g$에서 $156m^2/g$으로 증가하였다. 이러한 비표면적의 증가는 CO 가스의 감응도 측정을 통하여 감응도가 약 7.4배 증가하는 것으로부터 확인될 수 있었다.