• Journal of Microbiology and Biotechnology
• /
• v.21 no.6
• /
• pp.652-658
• /
• 2011

The growth kinetics of Streptomyces noursei NRRL 5126 was investigated under different aeration and agitation combinations in a 5.0 l stirred tank fermenter. Poly-${\varepsilon}$-lysine biosynthesis, cell mass formation, and glycerol utilization rates were affected markedly by both aeration and agitation. An agitation speed of 300 rpm and aeration rate at 2.0 vvm supported better yields of 1,622.81 mg/l with highest specific productivity of 15 mg/l.h. Fermentation kinetics performed under different aeration and agitation conditions showed poly- ${\varepsilon}$-lysine fermentation to be a growth-associated production. A constant DO at 40% in the growth phase and 20% in the production phase increased the poly-${\varepsilon}$-lysine yield as well as cell mass to their maximum values of 1,992.35 mg/l and 20.73 g/l, respectively. The oxygen transfer rate (OTR), oxygen utilization rate (OUR), and specific oxygen uptake rates ($qO_2$) in the fermentation broth increased in the growth phase and remained unchanged in the stationary phase.

• ALGAE
• /
• v.35 no.3
• /
• pp.237-252
• /
• 2020

Temperate rocky reefs dominated by the giant kelp, Macrocystis pyrifera, support diverse assemblages of benthic macroalgae that provide a suite of ecosystem services, including high rates of primary production in aquatic ecosystems. These forests and the benthic macroalgae that inhabit them are facing both short-term losses and long-term declines throughout much of their range in the eastern Pacific Ocean. Here, we quantified patterns of benthic macroalgal biomass and irradiance on rocky reefs that had intact kelp forests and nearby reefs where the benthic macroalgae had been lost due to deforestation at three sites along the California, USA and Baja California, MEX coasts during the springs and summers of 2017 and 2018. We then modeled how the loss of macroalgae from these reefs impacted net benthic productivity using species-specific, mass-dependent rates of photosynthesis and respiration that we measured in the laboratory. Our results show that the macroalgal assemblages at these sites were dominated by a few species of stipitate kelps and fleshy red algae whose relative abundances were spatially and temporally variable, and which exhibited variable rates of photosynthesis and respiration. Together, our model estimates that the dominant macroalgae on these reefs contribute 15 to 4,300 mg C m^-2 d^-1 to net benthic primary production, and that this is driven primarily by a few dominant taxa that have large biomasses and high rates of photosynthesis and / or respiration. Consequently, we propose that the loss of these macroalgae results in the loss of an important contribution to primary production and overall ecosystem function.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.6
• /
• pp.817-822
• /
• 2000

A proper flashing light is expected to enhance microalgal biomass productivity and photosynthetic efficiency. The effect of flashing light on high-density Chlorella kessleri (UTEX 398) cultures was studied using light-emitting diodes. A frequency modulator was designed to flash LEDs, and the device successfully provided wide range of frequencies and various duty cycles of flashing. A relatively high frequencies of 10, 20 and 50 kHz were used in this study. These frequencies have very short flashing time ($2-50{\mu}s$), which corresponded to the time constant of the light reaction of photosynthesis. The specific oxygen production rates of photosynthesis under flashing light were compared with those under an equivalent continuous light in specially designed illumination cuvette. The specific oxygen production rates under flashing light were 5-25% higher than those under the continuous light. A range of cell concentration was discovered, where the benefit of flashing light was maximized. The photosynthetic efficiency was also higher under flashing light with frequencies of over 1 kHz, which was a clear indication of flashing light effect and the degree of mutual shading could by overcome by flashing lights, particularly at high-density algal cultures.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.421-428
• /
• 1989

A soil bacterium synthesizing an extremely viscous biopolymer was isolated and identified as Pseudomonas delafieldii. The optimal pH and temperature for the growth were 6.5 and 3$0^{\circ}C$, respectively. Maximum specific growth rate was 0.24 h$^{-1}$. The specific polysaccharide productivity, growth yield and product yield were 6.25 mg/g-cell/h, 54.5% and 38.39%, respectively. The polysaccharide was presumed to be $\beta$-glucan containing glucose and gluconolactone (1.9：1.0 in molar ratio) and 1.35 % acetyl group, Element analysis showed that it contained carbon (31.85%) and hydrogen (5.15%). The weight average molecular weight by GPC was 5.64$\times$10$^7$. The intrinsic viscosity was 42.84 dl/g.

• Journal of Microbiology and Biotechnology
• /
• v.2 no.2
• /
• pp.141-151
• /
• 1992

Physiological changes of the murine hybridoma cell line $S3H5/\gamma{2bA2}$ during adaptation to RPMI 1640 medium with 1%(v/v) fetal bovine serum were characterized in terms of cell growth, antibody production, morphology, and metabolic quotients. Cells adapted to 1% serum medium in T-flasks became sensitive to shear induced by mechanical agitation and required at least 5% serum in the medium or spent medium for cell growth in spinner flasks, while cells adapted to 10% serum medium in T-flasks could grow in 1% serum medium in spinner flasks. Consequently, long-term adaptation to low serum media may not give the expected growth enhancement. After adaptation to 1% serum medium, changes in cell morphology were observed. The cells in 10% serum medium were uniform and circular, while cells in 1% medium were irregularly shaped. The DNA contents, which were measured by flow cytometry, were almost constant among the cells in the range of 1% to 10%. Further, no significant changes in energy metabolism and specific monoclonal antibody production rate were observed among these cells.

• Journal of Information Technology Services
• /
• v.5 no.2
• /
• pp.155-168
• /
• 2006

Software product line is a software product or a set of software system, which has common functions. We can develop a specific software product, which satisfies requirements of a particular market segment and a mission in a specific domain by reusing the core asset such as the developed software architecture through the software product line. Software development methodology based on the software product line can develop a software more easily and fast by reusing the developed software core asset. Developed countries of software technology select software product line as a core field of software production technology, and support technology development. In case of USA, CMU/SEI(Carnegie Mellon University/Software Engineering Institute) developed product-line framework 4.0 together with the industry and the Department of Defense. Europe is supporting the development of product line technology through ITEA(IT for European Advancement) program. However, industries in our country understand the necessity of software production technology based on product line concept for the purpose of increasing productivity, it is not sufficient to invest for this technology development. In this paper, we aim to construct the common architecture of software product line for production of the software product line.

• Plant Biotechnology Reports
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2011

Secondary walls have recently drawn research interest as a primary source of sugars for liquid biofuel production. Secondary walls are composed of a complex mixture of the structural polymers cellulose, hemicellulose, and lignin. A matrix of hemicellulose and lignin surrounds the cellulose component of the plant's cell wall in order to protect the cell from enzymatic attacks. Such resistance, along with the variability seen in the proportions of the major components of the mixture, presents process design and operating challenges to the bioconversion of lignocellulosic biomass to fuel. Expanding bioenergy production to the commercial scale will require a significant improvement in the growth of feedstock as well as in its quality. Plant biotechnology offers an efficient means to create "targeted" changes in the chemical and physical properties of the resulting biomass through pathway-specific manipulation of metabolisms. The successful use of the genetic engineering approach largely depends on the development of two enabling tools: (1) the discovery of regulatory genes involved in key pathways that determine the quantity and quality of the biomass, and (2) utility promoters that can drive the expression of the introduced genes in a highly controlled manner spatially and/or temporally. In this review, we summarize the current understanding of the transcriptional regulatory network that controls secondary wall biosynthesis and discuss experimental approaches to developing-xylem-specific utility promoters.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.3
• /
• pp.579-586
• /
• 2005

When subjected to hyperosmotic pressure by NaCl addition, H69K-NGD transfectoma, like KR12H-2 transfectoma, displayed decreased specific growth rate (${\mu}$) and increased specific antibody productivity ($q_{Ab}$): Elevation of medium osmolality from 280 mOsm/kg to 415 mOsm/kg decreased ${\mu}$ by $79\%$ in batch cultures of H69K-NGD transfectoma, while it increased $q_{Ab}$ by $103\%$. However, unlike KR12H-2 tranfectoma, enhanced $q_{Ab}$ of H69K-NGD transfectoma at hyperosmolalities was not due to elevated levels of Ig mRNAs. In hyperosmotic cultures of H69K-NGD transfectoma, heavy-chain mRNA per cell was not enhanced with increasing osmolality. Hyperosmotic pressure was found to preferentially enhance immunoglobulin (Ig) translation rates of H69K-NGD transfectoma. However, under hyperosmotic pressure, the translation rate of Ig polypeptides was not enhanced as much as $q_{Ab}$. This result suggests that hyperosmotic pressure also influences the post-translational process. Taken together, the results obtained show that intracellular response of transfectomas to hyperosmotic pressure, in regard to the main intracellular steps of the antibody secretory pathway, is cell-line dependent.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.5
• /
• pp.918-925
• /
• 2008

Controlling the light energy and major nutrients is important for high cell density culture of cyanobacterial cells. The growth phase of Anabaena variabilis can be divided into an exponential growth phase and a deceleration phase. In this study, the cell growth in the deceleration phase showed a linear growth pattern. Both the period of the exponential growth phase and the average cell growth rate in the deceleration phase increased by controlling the light intensity. To control the light intensity, the specific irradiation rate was maintained above $10\;{\mu}mol/s/g$ dry cell by increasing the incident light intensity stepwise. The final cell density increased by controlling the nutrient supply. For the control of the nutrient supply, nitrate, phosphate, and sulfate were intermittently added based on the growth yield, along with the combined control of light intensity and nutrient concentration. Under these control conditions, both final cell concentration and cell productivity increased, to 8.2 g/l and 1.9 g/l/day, respectively.

• The Journal of Industrial Distribution & Business
• /
• v.14 no.11
• /
• pp.19-25
• /
• 2023

Purpose: Prior studies regarding ethical management on worker's performance have primarily focused on specific industries or regions, potentially limiting the generalizability. This gap in knowledge underscores the need for a comprehensive investigation that considers a diverse range of industries and thoroughly examines the multifaceted aspects of ethical management. Research design, data and methodology: The academic search platform used for this study was 'Google Scholar', 'Scopus', and 'Web of Science' indexes various scholarly articles, including peer-reviewed journals and books. By utilizing specific search terms such as "corporate ethical management" and "employee performance," a vast pool of relevant studies was identified. Results: The findings indicated four effects: first, a positive correlation between ethical management practices and heightened employee motivation and engagement; second, an augmentation in organizational commitment and job satisfaction among employees; third, a reduction in turnover rates, indicating enhanced employee retention; and fourth, an elevation in overall productivity and performance outcomes. Conclusions: In sum, this study offers actionable insights, advocating for adopting and reinforcing ethical management strategies as a potent means to foster a high-performance work culture. These encompass fostering a robust ethical framework, cultivating a culture of transparency and open communication, and providing avenues for employees to voice ethical concerns without fear of retribution.