본 연구에서는 사업장에서 발생되는 지정폐기물 중 폐기물관리법상 규제되고 있는 유해물질류 7종의 함량 특성을 조사하였다. Cu, Pb 등과 같이 규제되고 있는 중금속의 배출 가능성이 높은 표본사업장을 선정하여 9개 업종, 90개 사업장에서 슬러지, 폐촉매 등 폐기물 종류별 시료 108건을 채취 분석하였다. 분석방법은 선진국의 분석방법을 토대로 제안한 함량시험방법으로 분석하였고 그 결과는 함량기준으로 관리하고 있는 오스트리아의 규제기준과 비교검토하였다. 그 결과 Cu는 모든 업종에서 비교적 높은 농도로 검출되었으며, 특히 코크스.석유정제품 제조업, 1차 금속산업, 전자부품, 영상, 음향 및 통신장비제조업에서 발생된 오니, 분진, 소각재 등의 폐기물이 오스트리아 기준 100 mg/kg 보다 높은 농도로 나타났다. Pb은 1차 금속산업에서 발생된 분진에서 높은 농도로 검출되었으며 총 크롬의 경우에는 상업분류코드 18, 19, 23 등에서 높은 농도로 나타났다. 또한 Cr(VI)을 분석한 결과, 봉제의복 및 모피 산업에서 발생된 분진에서 높은 농도를 나타나는 것으로 조사되었다.
The main point of this study is to find out duplicates and differences among various regulations from different organizations. Also, it focuses on creating a reasonably unified regulation system to standardize safety & environment management. In this study, I analyzed the commonalities and the differences of two systems which are typical korean Process Safety Management System and off-site Consequence Analysis. It is confirmed that there are 25 species of overlapped material of those two systems and assessment like handling material information, facilities lists, hazardous substances and list of machine power. Process safety report focuses on onsite workers and facility protect. On the other hand, off-site Consequence Analysis focuses on design, arrangement and management of handling facility from off-site influence. I found difference two system of Enforcement purposes and way. Contradiction of Harmful information of Chemicals Control Act and occupation safety and health acts from same material. To be specific, There are no unit rule of occupation safety and health acts. so it permit inch, psi etc. But Chemicals Control Act provides that m, Mpa units. Therefore, Each regulatory duplication of items for chemicals management, standardization is writing so that you can coordinate overlapping items in the measures the need to be presented.
Kimbab is the most popular ready-to-eat (RTE) food in Korea. A rapid detection method based on multiplex PCR technique was developed for detection of major food-borne pathogens like Salmonella spp., Shigella spp., Bacillus cereus, Listeria monocytongenes, and Staphylococcus aureus. Specific bands were obtained as 108 bp (Sau, S. aureus), 284 bp (Sal, S. enterica, S. enteritids, and S. typhmurium), 404 bp (Lmo, L. monocytogenes), 475 bp (Bce, B. cereus), and 600 bp (Shi, S. flexineri and S. sonnei). Visible cell numbers varied from 4.14-5.03, 3.61-4.47, and 4.10-5.11 log CFU/g in randomly collected June, July, and August samples, respectively. Among the 30 kimbab samples obtained 83.3% samples were contaminated and 16.7% samples were free from contamination. The highest rate of contamination was with S. aureus (56.7%) followed by B. cereus (43.3%), Salmonella spp. (36.7%), Shigella spp. (13.3%), and L. monocytogenes (6.7%). The identification of the pathogenic species could be faster using one polymerase chain reaction (PCR) and the ability to test for food-borne pathogenic species in kimbab will save time and increase the ability to assure its quality.
We studied electrochemical sensors using printed carbon nanotube (CNT) film on a polyethylene terephthalate (PET) substrate. Multiwalled CNT films were printed on a PET substrate to study its feasibility as hazardous and noxious substances (HNS) detection sensor. The printed CNT film (PCF) with a 50 ㎛ thickness exhibited a specific resistance of 230 ohm. To determine the optimum sensor structure, a resistance-type PCF sensor (R-type PCF sensor) and a conductive-type PCF sensor (C-type PCF sensor) were fabricated and compared using diluted NH3 droplets with various concentrations. The response magnitude, response time, sensitivity, linearity, and limit of detection (LOD) were compared, and it was concluded that the C-type PCF sensor exhibited superior performance. By applying a C-Type PCF sensor, we confirmed the detection performance of 12 types of floating HNS and the response of the sensor with selectivity according to the degree of polarity.
Objectives: The purpose of this study is to examine the parental recognition and utilizing patterns of oriental medical care in children who live in Seong-Dong district. Methods 802 day-care center children's parents participated in the survey on recognition and utilizing patterns of oriental medical care, and 702 of the surveys were analyzed. Results: 1. 38.33% has received previous oriental medical treatments and most were received at the children's age under 12-24 months. Majority of the treatments took place in the clinical settings. By recommendation, some also received their treatment at the medical centers. One of the reasons why they receive oriental medical treatments was that they prefer to balance their treatment with the orental medical treatments along with the western's. 2. 53.85% of those who received oriental medical treatments were satisfied with their treatments. The effective treatment results were the major reason for the satisfaction. 3. 49.56% of those who had oriental medical treatments chose specific oriental medical facilities for the children's ailment. Most specific oriental medical facilities were local oriental medical clinics. Reputation fame were the main reason in choosing the clinics. 4. In 2009, 55.26% had received care in the specific oriental medical clinics for the diseases, such as respiratory symptoms, systemic symptoms, gastrointestinal symptoms, skin problems, neurological and psychiatric disease for infants, and respiratory symptoms, gastrointestinal symptoms, systemic symptoms, skin problems, neurological and psychiatric symptoms, urinary symptoms and musculoskeletal symptoms for toddlers. 5. The average duration of herbal treatment were 7-14 days, preferably 4-6 days, and preferred number of medical visits were once a week on Saturdays and preferred day for night cares were on Friday nights. Average treatment fee per treatment was less than 10,000 won which coincided with the preferred treatment fee per visit. 6. The very first medical institutions chosen by parents once their children are ill are the following; Western medical institutions, western medical clinics, pharmacies, oriental medical clinics, health centers, and lastly, oriental medical institutions. The major concerns in receiving oriental medical cares include pesticides in herbs and hazardous substances in heavy metals. Preferred form of oriental medicine was decoction, the negative feedback of oriental medicine was mostly due to the bitter taste of the oriental herbal decoctions. Preferred frequency of intake was twice a day with less than 10cc~20cc per single intake. Conclusions: Taken all together, we conclude that the growing recognition of Oriental Pediatric medicine is needed among parents.
일반적으로 실제 하천의 EC 값은 일정하게 유지가 된다. 연속식, 반연속식 운전으로 실험한 결과 정상상태(steady state)를 보였다. 연속운전의 경우 유출수의 EC 값은 1.7 dS/m로 일정하게 유지되었으며(유입 EC = 0.1 dS/m) 반연속식운전의 경우 새로운 유입수가 유입됨으로 인해 초기 EC는 약 0.1 dS/m이고 미생물이 황을 산화함에 따라 황산염 이온이 생성되고 EC가 증가하여 30분 후 EC는 약 0.6 dS/m로 측정되었고 장시간 운전하여도 일정한 트랜드의 안정적인 값이 측정되었다. ${NO_2}^{-}-N$가 주입되면서 미생물이 저해를 받아 EC가 감소하는 경향을 보였으며 이를 통해 독성물질 주입여부를 판별할 수 있었다. 독성이 없는 유입수를 다시 유입시켰을 경우 약 4~5시간 후 반응조 내의 미생물이 원상태를 회복하여 유입 전 EC의 값이 다시 측정되었다. 황을 이용한 독성모니터링방법은 다른 여러 조건의 실험을 통해 문제점 파악 및 보완이 필요하지만 연속식 운전, 반연속식 운전 2가지 방법을 통해 독성물질을 신속하게 탐지할 수 있을 것으로 판단된다.
해상 유통되는 유해액체물질(NLS)의 유출사고대비 물질군 선정을 위해 596종의 NLS를 대상으로 위해성 DB를 구축하고 우선 순위 선정시스템을 통해 전체 우선순위를 선정하였다. 우선순위 목록을 바탕으로 2014-2015년 해상유통물질 158종을 추출한 뒤 물질군 구분 기준을 적용하여 0~3순위의 4개 물질군을 제시하였다. 국가차원의 NLS 유출사고대비를 위해서는 물동량 및 유해성이 높은 0~1순위 물질군의 집중관리와 함께 2~3순위 물질군의 정보 구축작업이 지속되어야 한다. 항만별로는 NLS 유통 유형이 다르므로 각 항만의 물질별 유통특성을 파악한 뒤 0~1순위 물질군 위주로 관리하는 것이 효율적일 것으로 판단된다. 또한, 동해남부권역(울산, 부산), 남해중부권역(광양, 여수), 서해중부권역(평택, 대산, 인천)을 NLS 사고대비를 위한 특별관리구역으로 지정하여 해상유통되는 NLS 의 감시 감독을 강화하고 방제 장비, 자재 및 약제를 집중 배치해야 할 것으로 판단된다. 향후, 위해성 DB의 구축과정에서 나타난 위해성 정보 부재 물질들의(만성독성) 지속적인 생산 및 보완이 필요하며, 특히 수생태 독성의 경우 해양생물종을 대상으로 한 자료 생산 및 확보가 지속되어야 할 것이다. 또한, 해상 HNS 사고 관리를 위해서는 HNS 해상유통에 대한 정보를 확인할 수 있는 시스템이 조속히 구축되어야 한다.
본 연구에서는 축산물가공품 중 식육원료의 진위여부를 판별하기 위하여 분자생물학적 기법을 이용한 시험법을 개발하였다. 식육원료의 종 판별을 위한 유전자로는 미토콘드리아 DNA에 존재하는 12S 또는 16S 유전자를 대상으로 하였으며, 가공식품에 적용하기 위하여 PCR 산물의 크기는 200bp 내외가 되도록 프라이머(species-specific primer)를 설계하였다. 대상 식품원료로는 축산물 10종을 대상으로 하였으며 프라이머를 사용하여 유전자증폭(PCR) 후 전기영동 하여 예상되는 PCR 산물의 생성유무를 확인하였다. PCR을 실시한 결과 가축인 소고기, 돼지고기, 염소고기, 양고기, 사슴고기, 말고기에 대하여는 각각 131, 138, 168, 144, 191, 142bp에서, 가금류인 닭고기, 오리고기, 칠면조 고기, 타조고기에 대하여는 각각 281, 186, 174, 238bp에서 예상크기의 PCR 산물을 확인하였다. 그리고 프라이머 별로 유사 종에서는 비 특이적 PCR 산물(non-specific PCR product)은 생성되지 않았다. 본 연구에서 개발된 프라이머를 이용한 유전자분석법을 돼지고기 및 닭고기를 함유하는 축산물가공품, 소고기를 함유하는 복합조미식품을 대상으로 시험한 결과 적용 가능함이 확인되어 향후 축산물가공품 중 식육원료의 진위여부 판별에 활용이 가능할 것으로 판단된다.
오염토양을 효과적으로 진단하고 경제적인 복원을 위해서는 오염토양의 오염원인, 오염정도, 주변 환경이나 인축에 대한 피해발생 유무, 오염물의 이동경로 등을 올바르게 평가하는 것이 대단히 중요하다. 이를 위해서는 오염토양과 토양내 가스, 주변 지하수 및 지표수, 침전물 등의 효율적 시료채취와 정확한 분석이 필수적이라 할 수 있다. 오염지역 토양의 오염도평가를 표준화하고 처리효율성을 높이기 위해서는 전문처리요원이 토양의 오염도와 위험성을 정확하게 판단 할 수 있도록 단순하면서도 경제적인 연속시험법을 필요로 한다. 이것은 오염토양의 조사와 복원시간 및 전치적일 기술의 진보를 가져오는데 상당한 시간절약을 꾀할 수 있다. 특히 효과적인 현장평가를 위해서는 오염특성을 포함한 많은 관련 요인들에 대한 표준화된 기준하에서 오염의 형태와 정도를 결정하는 것이 중요하다. 현장평가를 위한 일반적인 절차는 작업계획과 토양조사수준에 따라 Phase I, II, III의 단계적 방법으로 구성되어 있다. Phase I은 토양의 과거용도 및 오염물의 유입경로를 기초로 하여 현장의 환경여건을 파악하는 단계이다. Phase I에서 잠재적 오염물질에 의해 오염된 것이 확인되면 Phase II에서는 오염물의 존재여부와 존재정도를 파악하는 단계로 시료의 채취 및 분석과정이 여기에 포함된다. Phase III는 Phase I과 II의 결과를 바탕으로 오염토양을 복원하는 단계이다. 여기서 평가기준이 지역 특이적인 것인지 적당한 것인지를 결정하는 중요한 요인은 (1) 시료채취의 공간분포도와 지역의 크기, (2) 취해진 시료의 수, (3) 시료채취 방법, 그리고 (4) 자료를 분석요령 등이다. 선택된 분석방법이 추천할만한 것일지라도 정량방법의 선택여부는 현장조사방법에 대한 훈련이나 조사경험을 가진 사용자에 의해 결정되는 것이 바람직할 것이다.
Recently, regulations on toxic compounds in aquatic environment have been strengthened in korea due to the increasing public awareness of the water quality. Typically, these regulations include introduction of emerging toxic compounds and stricter effluent limitations for the already regulated compounds. However, too strict regulations may cause excessive burden on the industry. Therefore it is also important to assess the economic impacts when the new effluent limitation guidelines are introduced. The estimation of the additional cost for the wastewater dischargers to meet the new guidelines are based on the selected treatment technology to handle the hazardous substances and the regulatory levels for effluent limitations. To explore the procedures for cost estimation in enforcing new effluent limitations, a case study was performed specially for 1,4-dichlorobenzene. The pollutants of concern are surveyed for different industrial categories and various treatment technologies. For a given pollutant, the general performances of the treatment technologies are surveyed and a representative technology is selected. For a given technology, the capital cost and annual Operation and Maintenance (O&M) cost was calculated. The calculation of baseline costs to operate ordinary treatment technologies is also important. The ratio between the cost for introducing new treatment process and the baseline cost required for conventional technology was used to evaluate the economic impact on the industry. For 1,4-dichlorobenzene, steam stripping and activated carbon processes were selected as the specific treatment technologies. The cost effects to the regulation of the compound were found to be 6.4% and 14.5% increase in capital cost and O&M cost, respectively, at the flow rate over $2,000m^3/d$ for the categories of synthetic resin and other plastics manufacturing industry. For the case of petrochemical basic compounds manufacturing industry, the cost increases were 5.8% and 12.4%, respectively. It was suggested that cost effect analysis to evaluate the economic impacts of new effluent limitations on the industry is crucial to establish more balanced and reasonable effluent limitations to manage the industrial wastewater containing emerging toxic compounds in the wastewater.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.