Abstract
This study focused on the content characteristics of regulated hazardous substances in specific wastes. Regulated heavy metal such as Cu, Pb, Cd analyzed the 108 waste samples that it choice from the representative facilities. Analytical method used content test method, suggested on the basis of analytical method of developing country, and the results as compared with limited standard in Austria Petroleum, primary metalworking and electronic industry had high content of Cu more than 100 mg/kg of Austria limited standard. Pb detected high level concentration the sample that dust producted at Primary metalworking industry. In case of total Cr was show that high content at KSIC 18, 19, 23 etc but result analyzed Cr(VI), it was shown that high level at dust producted from sewing clothes and fur industry.
본 연구에서는 사업장에서 발생되는 지정폐기물 중 폐기물관리법상 규제되고 있는 유해물질류 7종의 함량 특성을 조사하였다. Cu, Pb 등과 같이 규제되고 있는 중금속의 배출 가능성이 높은 표본사업장을 선정하여 9개 업종, 90개 사업장에서 슬러지, 폐촉매 등 폐기물 종류별 시료 108건을 채취 분석하였다. 분석방법은 선진국의 분석방법을 토대로 제안한 함량시험방법으로 분석하였고 그 결과는 함량기준으로 관리하고 있는 오스트리아의 규제기준과 비교검토하였다. 그 결과 Cu는 모든 업종에서 비교적 높은 농도로 검출되었으며, 특히 코크스.석유정제품 제조업, 1차 금속산업, 전자부품, 영상, 음향 및 통신장비제조업에서 발생된 오니, 분진, 소각재 등의 폐기물이 오스트리아 기준 100 mg/kg 보다 높은 농도로 나타났다. Pb은 1차 금속산업에서 발생된 분진에서 높은 농도로 검출되었으며 총 크롬의 경우에는 상업분류코드 18, 19, 23 등에서 높은 농도로 나타났다. 또한 Cr(VI)을 분석한 결과, 봉제의복 및 모피 산업에서 발생된 분진에서 높은 농도를 나타나는 것으로 조사되었다.