• 한국추진공학회지
• /
• 제14권4호
• /
• pp.59-64
• /
• 2010

터보샤프트 엔진의 고공성능시험에서 주요 성능 인자인 축마력, 연료 유량, 비연료 소모율 및 공기유량에 대하여 측정의 수학적 모델을 제시하고 측정 불확도를 평가하였다. 터보제트 및 터보팬 엔진의 경우와 비교하여 차이점을 논의하였다. 시험 조건의 측정 불확도를 평가하였으며, 이를 보정된 성능 데이터 측정 불확도에 반영하는 방법을 제시하였다. 실제 터보샤프트 엔진 고공성능시험설비를 이용한 시험 사례에 대한 측정 불확도 평가 결과를 제시하였다. 주요 성능 인자의 측정 불확도는 시험 조건측정의 불확도를 반영하였을 경우 0.65~1.09%, 반영하지 않았을 경우 0.36~0.94%로 평가되었다.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.767-772
• /
• 2023

In this study, combustion experiments were conducted at various engine speeds under full-load conditions using a single-cylinder diesel engine by blending butanol, pentanol, and octanol with diesel at a volume ratio of 10%. Experimental results revealed that higher alcohol-diesel blends resulted in lower brake torque and brake power than pure diesel due to the lower calorific value and the cooling effect during evaporation. An evident improvement in the brake thermal efficiency of the blended fuels was observed at engine speeds below 2,000 rpm, with the butanol blend exhibiting the highest thermal efficiency overall. Furthermore, the brake-specific fuel consumption of the higher alcohol-diesel blends was lower than that of pure diesel at speeds below 2,200 rpm. When using blended fuels, the exhaust gas temperature decreased under lean mixture conditions due to heat loss to the air and the cooling effect from fuel evaporation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권9호
• /
• pp.981-986
• /
• 2015

지구온난화에 대한 심각성이 대두되면서 선박부문의 온실가스 배출에 관한 연구가 전 세계적으로 활발하게 진행되고 있다. 이에 반하여 국내 연구 수준은 기초에 그치고 있다. 본 논문에서는 선박으로부터 배출되는 이산화탄소의 여러가지 저감대책 중에서 운항손실과 투자비용을 최소화하면서 수행할 수 있는 방법으로 전자제어엔진 사용, 트림 최적화, 프로펠러 연마 및 친환경 방오도료의 사용을 선정하였다. 선정된 저감대책들을 운항실습선에 적용하여 시험 운항을 실시하였고 연료소비율에 미치는 영향을 분석하였다. 그 결과, 각 대책들은 약 1~5%의 연료소비율 저감 효과가 있었고 이를 에너지효율운항지수 산출에 적용하면 약 1~5%를 감소시키는 것을 알 수 있었다. 향후 국제적 환경규제를 제정할 때 우리나라에게 유리하도록 대응하기 위해서는 에너지효율운항지수에 대한 연구에도 지속적인 노력이 필요하다고 사료된다.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.31-39
• /
• 2010

Although driving patterns strongly influence greenhouse gas and air pollutant emission rate from light duty vehicles, emission measurements have been mainly based on chassis dynamometer testing with one standard driving pattern. And there has been limited work on quantifying the independent effect of driving parameters on emission rate because of multidimensional nature of real-world driving pattern. The objective of this study is to obtain the quantitative effect of relative positive acceleration (RPA) on vehicle emission rate. RPA has been used to define the occurrence of acceleration demanding large amounts of power in certain driving distance and shown to be a significant affecting parameter for real-world emission rate. 40 driving patterns have been developed with fixed driving parameters to investigate independent effect of RPA. For the same values of average vehicle speed and power, the trend in carbon dioxide emission rate and fuel consumption with respect to RPA is very clear. Emission rate of nitrogen oxide and particulate matter also increase with respect to RPA, but the trend is less clear. Carbon dioxide emission from diesel vehicle appear to be more affected by high accelerations compared to that from gasoline vehicle because of high intake air restriction during acceleration caused by turbocharger and intercooler. The results have implications for the possible reduction of environmental effects through better traffic planning and management, driver education and car design.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1081-1086
• /
• 2014

본 연구는 4실린더 커먼레일 디젤기관에서 식물성 바이오 연료인 카롤라유(Canola oil)와 디젤연료를 혼합하여 사용하였을 때 바이오디젤 혼합율과 엔진 회전수 변화에 따른 연소 및 배기 배출물 특성을 조사하기 위하여 실험을 수행하였다. 실험 결과에 의하면 엔진 회전수 1,000, 1,500, 2,000(rpm)에서 연소 압력은 바이오디젤 혼합율이 증가할수록 감소하고, 2500rpm에서는 바이오디젤 혼합율이 증가할수록 증가 하였으며, 열 발생율은 바이오디젤 혼합율이 증가 할수록 모두 증가하였다. 연료 소비율은 바이오디젤 혼합율이 증가할수록 엔진 회전수가 상승할수록 증가하였다. CO 배출물은 엔진 회전수가 상승할수록, 바이오디젤 혼합율이 증가할수록 감소하였다. $CO_2$, NOx, 배출물은 엔진 회전수가 상승할수록 바이오디젤 혼합율이 증가할수록 증가하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2058-2063
• /
• 2010

United Nations Framework Convention on Climate Change(UNFCCC) is one of the international environmental convention with the goal of stabilizing Greenhouse Gas(GHG) concent in the atmosphere and preventing potentially dangerous change in the earth's climate. The purpose of this convention is to reduce fossil fuel consumption and to prevent GHG emission. The Republic of Korea was one of the Annex-II parties submitted its national communication to the UNFCCC. As a developing county, there is no GHG emission reduction commitments made by South Korea during first commitment period(2008~2012). On the contrary, South Korea' status as an OECD member, joining in 1996, ranks 6th in GHG emission. Furthermore the rate of increase of GHG is first among OECD countries in year 2005. As a result, Korea will probably be incorporated into Annex-I in second commitment period (after 2013). So, Korea government established and announced Voluntary GHG Reduction scheme to reduce emissions of 4%(accounting for 30% reduction base on Business As Usual) from the 2005 level by the year 2020 for mitigation of reduction duty impact. In specific case of Korea, transportation section occupied almost 21% of total energy consumption and nearly 17% of total GHG emission at 2005, so systematic emission management is required. To do so, in this research, we focus on systematic way of GHG management system to handle GHG reduction duties in Railroad section.

• 에너지공학
• /
• 제25권4호
• /
• pp.198-206
• /
• 2016

자동차 표시연비는 국가적으로 에너지관리 지표로서 활용되며, 자동차 제작사의 기술개발을 유도하고, 소비자 차량구매 시 정보제공의 역할을 담당하고 있다. 하지만 정부의 표시연비가 체감연비와 상이하다는 소비자 불만이 지속되어 정부는 보다 정확한 표시연비 측정을 위해 미국의 5-cycle 시험방법을 국내 차량 기준에 맞게 재설정하여 도입하였다. 본래는 다양한 환경조건 및 주행패턴이 반영된 5개의 시험모드를 모두 주행함으로써 측정된 결과 값을 표시연비로 계산하는 방법이지만 소요되는 자원의 급격한 증가에 따른 충격을 완화하기 위하여 2개의 시험모드(도심(FTP-75 mode), 고속도로(HWFET mode))의 결과 값을 5-cycle 시험법으로 계산된 연비 값과 동등한 수준으로 산출하는 5-cycle 보정식을 사용하고 있다. 이 보정식은 2011년에 30대 차량의 5-cycle 시험방법으로 산출되었으나 최근 자동차 기술의 급속한 발전으로 인한 신형식 자동차에 대한 기존 5-cycle 보정식에 대한 검토가 필요할 것으로 판단되었다. 본 연구에서는 최근 기술이 적용된 14대의 신형식 자동차를 대상으로 기존과 동일한 시험 방법을 통해 시험모드별 연비 특성을 확인하고, 기존에 개발된 보정식과 차이를 분석한 결과 기존 시험 차량 결과와 큰 차이를 보이지 않았으며 보정식 또한 최대 1.5% 이내의 오차로써 기존 연비 보정식은 현재의 자동차 기술발전에 따른 개선도에 크게 영향을 받고 있지 않음을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권5호
• /
• pp.6-16
• /
• 1992

Since world-wide oil shock on 1970s, many large size-low speed diesel engines, instead of steam turbines, are used for the industrial electric power generating plants due to their economic advantage of low specific fuel consumption. But it is very important to control their electric power fluctuation problems for the purpose of smooth parallel operation with existing power plants. In this paper the fluctuation problem of KEPCO Nam-cheju No.1 generator driven by diesel ngine(B & W 7K 60MC, 13931x138.5RPM) is investigated with analysis of torsional vibration of which 4th harmonic component is related to its power fluctuation. The problem can be improved by modification of cylinder arrangement and flywheel position in reverse sequence, equalizing the combustion gas pressure of all cylinder and installation of torsional vibration damper enlarged 30%(Je=7287Kg.m$^{2}$) and high quality balancing of generator rotor.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권7호
• /
• pp.1138-1144
• /
• 2004

In order to improve engine performance while overcoming the weak points of Pulse and MPC(Modular Pulse Converter) turbocharging system, a new turbocharging system. "Hi-Pulse system", has been introduced and developed for medium speed diesel engine. HYUNDAI HiMSEN engines. Hi-Pulse system is to utilize not only the benefits of MPC system at higher load but also the ones of Pulse system at lower load. As for the results. the specific fuel oil consumption and NOx emission were lowered compared with the Pulse and MPC system. Performance simulation were carried out to optimize intake and exhaust timing and exhaust duct arrangement and to improve the performance of Hi-Pulse system engine.em engine.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.25-32
• /
• 1999

This study was carried out to reduce NOx emissions from diesel engine and to investigate the variation of engine performance using the water injection. In this study the water was extracted from the exhaust gas and injected directly into the intake port with the inlet charge. The water condensing system operated as a closed system without any supplementary water supply. The experimental parameters such as the revolution the torque and the water injection rate are varied and the result from this experiment found the significant NOx reduction whereas the smoke emission increases as water/air ratio increases as the cases like the EGR. In spite of increasing the quantity of the water injection the engine output was slightly decreased and the specific fuel consumption was increased as was anticipated. Especially the system was founded to be effective on the reduction of the NOx emissions at the high load region relatively.