• Journal of Communications and Networks
• /
• v.13 no.6
• /
• pp.664-677
• /
• 2011

In order to control interference and improve spectrum efficiency in the femtocell and macrocell overlaid system (FMOS), we propose a joint frequency bandwidth dynamic division, clustering and power control algorithm (JFCPA) for orthogonal-frequency-division-multiple access-based downlink FMOS. The overall system bandwidth is divided into three bands, and the macro-cellular coverage is divided into two areas according to the intensity of the interference from the macro base station to the femtocells, which are dynamically determined by using the JFCPA. A cluster is taken as the unit for frequency reuse among femtocells. We map the problem of clustering to the MAX k-CUT problem with the aim of eliminating the inter-femtocell collision interference, which is solved by a graph-based heuristic algorithm. Frequency bandwidth sharing or splitting between the femtocell tier and the macrocell tier is determined by a step-migration-algorithm-based power control. Simulations conducted to demonstrate the effectiveness of our proposed algorithm showed the frequency-reuse probability of the FMOS reuse band above 97.6% and at least 70% of the frequency bandwidth available for the macrocell tier, which means that the co-tier and the cross-tier interference were effectively controlled. Thus, high spectrum efficiency was achieved. The simulation results also clarified that the planning of frequency resource allocation in FMOS should take into account both the spatial density of femtocells and the interference suffered by them. Statistical results from our simulations also provide guidelines for actual FMOS planning.

• Journal of the Optical Society of Korea
• /
• v.19 no.6
• /
• pp.687-694
• /
• 2015

A photoluminescence (PL) imaging method using a vision camera was employed to inspect InGaN/GaN quantum-well light-emitting diode (LED) epi-wafers. The PL image revealed dark spot defective regions (DSDRs) as well as a spatial map of integrated PL intensity of the epi-wafer. The Shockley-Read-Hall (SRH) nonradiative recombination coefficient increased with the size of the DSDRs. The high nonradiative recombination rates of the DSDRs resulted in degradation of the optical properties of the LED chips fabricated at the defective regions. Abnormal current-voltage characteristics with large forward leakages were also observed for LED chips with DSDRs, which could be due to parallel resistances bypassing the junction and/or tunneling through defects in the active region. It was found that the SRH nonradiative recombination process was dominant in the voltage range where the forward leakage by tunneling was observed. The results indicated that the DSDRs observed by PL imaging of LED epi-wafers were high density SRH nonradiative recombination centers which could affect the optical and electrical properties of the LED chips, and PL imaging can be an inspection method for evaluation of the epi-wafers and estimation of properties of the LED chips before fabrication.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.1
• /
• pp.151-167
• /
• 2015

At present cadastral surveying is being driven fort combination of digitalized cadastral map accord with real cadastral boundary between cadastral resurvey area and World Geodetic System transformation about all country. So this study is conducted to newly establish items being needed in making digitalization of parcel boundary points based on the World Geodetic System in registration conversion surveying. For this study firstly management of mountainous districts Act, related laws and registration conversion-related laws and regulations are reviewd. Secondly, economical, administrative validation by using data from 12-branch companies of LX is analyzed. Thirdly, surveying method and procedure were established through experimental surveying on the two cases such as digital and analog area. Finally, through investigating standard of estimate about cadastral surveying, it was calculated amendment of registration conversion surveying fee based on World Geodetic coordinate System.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.181-192
• /
• 1993

Image is composed of the digital numbers including information on natural phenomena, their condition and the kind of objects. Digital numbers change in geometric correction(that is preprocessing). This change of digital numbers gave an effect on results of land-cover classification. We intend to know the influence of resampling as classifying land-cover using the image reconstructed by geometric correction in this paper. Chun-cheon basin was selected the study area having most variable land-cover pattern in North-Han river valley and made on use of RESTEC data resampled in preprocessing. Land-cover is classified as six classes of LEVEL I using maximum likelyhood classification method. We classified land-cover using the image resampled by two methods in this study. Bilinear interpolation method was most accurate in five classes except bear-land in the result of comparing each class with topographic map. We should choose the method of resampling according to the class in which we put the importance in the image resampling of geometric correction. And if we use four-season's image, we may classify more accurately in case of the confusion in case of the confusion in borders of rice field and farm.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.93-99
• /
• 2010

Since the facility management for various facilities in urban area are conducted by general managers who have poor knowledge for surveying technology, it is not easy to trace the exact location of the facility in a short time with the GIS map only by themselves in the field. In order to improve it, VRS-RTK or SBAS DGPS system integrated with UMPC and PDA which is uploaded GIS field software are being used recently however lot of difficulties are still existed with the GPS positioning in urban area due to the lack of visible satellites, no reception of correction data and multipath error by the interruption of the high buildings and houses etc. Therefore, in this study, we applied with Network DGPS system which allows better reception of satellite signal and correction data even in dense housing areas with the use of GNSS receiver and CDMA mobile phone. Based on the analysis of field data, it was confirmed that standard deviations of the Network DGPS positioning are 0.3 to 0.84m with a very high positioning rate even in dense housing areas. Therefore, it was concluded that the Network DGPS system could be used widely to fast and accurate positioning for various facilities management works in dense housing areas in the future.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.71-77
• /
• 2010

Cut Slope Management System(CSMS) is a systematic maintenance and management system designed to prevent the collapse of cut slopes located along national roads. In order to implement safe road operation system, KICT has started the inventory of cut slopes and developed a cut slope database since 2006. Cut slope database management system using GIS technology and navigation system was developed as a Information Technology application. Through the Cut Slope Navigation System(SLOPE-Navi.), the previously developed database was checked and verified. The converted cut slope inventory data and field investigation data of 28,707 cut slopes were loaded on the navigation map. We consider that the Cut Slope Navigation Management System can be useful as in-situ system, which can be systematic and effective DB management and operation to prevent cut slope collapses and establish a remedial countermeasure as mitigation concerning disasters.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.119-129
• /
• 2010

The joint use of remotely sensed data and field measurements has been widely used to estimate aboveground carbon stock in many countries. Recently, Korea Forest Research Institute has developed new carbon emission factors for kind of tree, thus more accurate estimate is possible. In this study, the aboveground carbon stock of Danyang area in South Korea was estimated using k-Nearest Neighbor(kNN) algorithm with the 5th National Forest Inventory(NFI) data. Considering the spectral response of forested area under the climate condition in Korea peninsular which has 4 distinct seasons, Landsat TM seasonal satellite images were collected. As a result, the estimated total carbon stock of Danyang area was ranged from 3542768.49tonC to 3329037.51tonC but seasonal trends were not found.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.2
• /
• pp.17-24
• /
• 2014

This paper proposes an automatic extraction method of control point based on Geospatial Web Service. The proposed method consists of 3 steps. 1) The first step is to acquires reference data using the Geospatial Web Service. 2) The second step is to finds candidate control points in reference data and the target image by SURF algorithm. 3) By using RANSAC algorithm, the final step is to filters the correct matching points of candidate control points as final control points. By using the Geospatial Web Service, the proposed method increases operation convenience, and has the more extensible because of following the OGC Standard. The proposed method has been tested for SPOT-1, SPOT-5, IKONOS satellite images and has been used military standard data as reference data. The proposed method yielded a uniform accuracy under RMSE 5 pixel. The experimental results proved the capabilities of continuous improvement in accuracy depending on the resolution of target image, and showed the full potential of the proposed method for military purpose.

• 한국지형공간정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.58-65
• /
• 2002

The most widespread techniques for DEM generation are stereoscopy for optical sensor images and interfereometry for SAR images. These techniques suffer from certain sensor and processing limitations, which can be overcome by the synergetic use of both sensors and DEMs respectively. In this paper, different strategies for fusing SAR and optical data are combined to derive high quality DEM products. The multiresolution wavelet transform, which take advantage of the complementary properties of SAR and stereo optical DEMs, will be applied for the fusion process. By taking advantage of the fact that errors of the DEMs are of different nature using the multiresolution wavelet transform, affected part are filtered and replaced by those of the counterpart and is tested with two sets of SPOT and ERS DEM, resulting in a remarkable improvement in DEM. For the analysis of results, the reference DEM is generated from digital base map(1:5000).

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.39-46
• /
• 2006

This study is aimed at the development of ubiquitous based road disaster management system. The fundamental technologies used for developing this system are classified into three modules - wireless internet communication module, mobile module and server module. These fundamental technologies can be used not only for developing road disaster management system but also for developing various mobile or ubiquitous systems. With this system, workers can download many DB (Digital map, Attribute information etc.) from server to the field in realtime. The accuracy and objectivity of the DB could be improved with these informations collected at fields because these data can be used as basic data for road disaster information collection. Because in the web based server module - Web based Road Disaster Management System (URDMS) - field disaster information was showed link up with exist DB on road by absolute coordinate, the decision making with all of the field information was made and it sent to a field staff in realtime. The problems of current road disaster management rule ran be solved by this URDMS.