• 대한토목학회논문집
• /
• 제37권1호
• /
• pp.1-7
• /
• 2017

일반적으로 구조물에 폭발, 충돌, 지진과 바람 등과 같이 짧은 시간에 큰 하중이 작용하게 되면 구조물은 국부적으로 재료의 대변형(large deformation), 대회전(large rotation), 대변형률(large strain)등이 발생하게 된다. 이와 같은 현상을 해석하려면 전산연속체 역학에 기초하여 유체-구조물 상호작용 등을 고려할 수 있는 하이드로코드(Hydrocode)의 도움이 필요하다. 또한, 폭발로 인해 발생되는 순간 동역학적인 폭발 메커니즘은 매우 복잡하기 때문에 폭발실험을 병행하여 거동을 예측하는 것이 합리적인 방법이지만 막대한 비용과 시설이 요구되므로 한계가 있는 것도 사실이다. 따라서 본 논문에서는 하이드로코드인 AUTODYN을 사용하여 폭발해석한 결과를 기수행된 철근콘크리트 슬래브의 폭발실험 결과와 비교하여 폭발해석 방법의 타당성을 검토하였고, 동일한 폭발해석 모형에 대하여 철근 배근간격, 피복두께의 변화 및 수직철근 유무에 따른 폭발 손상도를 비교검토하였다. 검토한 결과, 철근의 배근간격에 대한 철근콘크리트 슬래브 두께의 비가 커질수록, 지름이 큰 철근보다 지름이 작은 철근을 많이 사용할수록, 마지막으로 수직철근을 배근할수록 콘크리트 구조물의 내폭성능이 향상됨을 알 수 있었다.

• 콘크리트학회논문집
• /
• 제20권2호
• /
• pp.231-237
• /
• 2008

복합 구조 형식인 PSC-강 혼합 거더는 신형식 구조로서 비대칭 경간 구조물이나 장대교량에 적용될 수 있다. 본 연구에서는 매입길이, 보강철근, 스터드, 프리스트레스 힘 등을 변수로 총 14개의 실험체를 제작하여 혼합 거더의 접합부 거동을 분석하고자 하였다. 모든 실험체는 보강철근, 스터드, 강판 등의 순서로 기능을 손실하면서 파괴되었다. 실험 결과에 의하면 접합부의 성능에는 스터드 배치와 보강철근에 비해 프리스트레싱 힘이 상대적으로 큰 영향을 미치는 것으로 분석되었다. 이와 함께 매입길이에 비하여 스터드의 배치가 접합부 성능에 보다 중요한 역할을 하는 것으로 평가되었다. 실험적 연구와 함께 슬립을 고려한 3차원 비선형해석을 수행하였다. 경계면의 거동은 인터페이스 요소와 슬립 물성을 통하여 완전 합성, 부분합성, 비합성으로 분석할 수 있는데 혼합 거더의 접합부 설계에 따른 경계면 거동을 해석과 실험 결과를 통하여 분석하였다. 특히, 스터드 전단연결재가 적용된 혼합 거더는 극한하중 단계에서 부분합성 거동을 나타내며 보강 철근 또한 혼합 거더의 극한강도 증진에 기여하는 것으로 분석되었다.

• Wind and Structures
• /
• 제23권2호
• /
• pp.109-125
• /
• 2016

Flow interference is investigated between two tripped cylinders of identical diameter D at stagger angle ${\alpha}=0^{\circ}{\sim}180^{\circ}$ and gap spacing ratio $P^*$ (= P/D) = 0.1 ~ 5, where ${\alpha}$ is the angle between the freestream velocity and the line connecting the cylinder centers, and P is the gap width between the cylinders. Two tripwires, each of diameter 0.1D, were attached on each cylinder at azimuthal angle ${\beta}={\pm}30^{\circ}$, respectively. Time-mean drag coefficient ($C_D$) and fluctuating drag ($C_{Df}$) and lift ($C_{Lf}$) coefficients on the two tripped cylinders were measured and compared with those on plain cylinders. We also conducted surface pressure measurements to assimilate the fluid dynamics around the cylinders. $C_D$, $C_{Df}$ and $C_{Lf}$ all for the plain cylinders are strong function of ${\alpha}$ and $P^*$ due to strong mutual interference between the cylinders, connected to six interactions (Alam and Meyer 2011), namely boundary layer and cylinder, shear-layer/wake and cylinder, shear layer and shear layer, vortex and cylinder, vortex and shear layer, and vortex and vortex interactions. $C_D$, $C_{Df}$ and $C_{Lf}$ are very large for vortex and cylinder, vortex and shear layer, and vortex and vortex interactions, i.e., the interactions where vortex is involved. On the other hand, the interference as well as the strong interactions involving vortices is suppressed for the tripped cylinders, resulting in insignificant variations in $C_D$, $C_{Df}$ and $C_{Lf}$ with ${\alpha}$ and $P^*$. In most of the (${\alpha}$, $P^*$ ) region, the suppressions in $C_D$, $C_{Df}$ and $C_{Lf}$ are about 58%, 65% and 85%, respectively, with maximum suppressions 60%, 80% and 90%.

• 한국농촌건축학회논문집
• /
• 제26권2호
• /
• pp.35-40
• /
• 2024

This study examines the classification and typical characteristics of 148 owner shop houses existing in the historical city center of Cheongju. First, they can be classified into single-story, middle-story, and divided types according to the distribution of residential and commercial functions. The single-story(36) has 'ㅡ', 'ㄱ', and 'narrow and deep'-shaped arrangement, with stores on the front and houses on the rear. The middle-story second floor(89) is divided into a first-story store and a second-story house, and the third floor(23) has different functions for each floor, but more than half of them have houses on the second and third floors. Among the total, there are also 16 cases in which the division type is taken with different construction times and structures. Second, in the position of the stairs connected to the upper floor among the middle-floor types(112), the outer stair type(52) to separate from the living space while making the most of the stores on the first floor accounts for 47%, but the biggest feature is that the inner staircase type(34) with privacy reaches 30%. The rear stair room type(26) entering through alleyways or private yards is also 23%. Third, the front pillar spacing varies from 1bay to 4bay in appearance, but the 2bay type on the 2nd floor and the 1bay type on the 3rd floor occupy the largest proportion. This exterior type is a characteristic of a owner shop house that can measure the range of personal ownership. Despite the conflicting functions of stores and houses, 35~40% of the cases are in which the opening positions of the upper and lower floors are unified.

• 농촌계획
• /
• 제14권4호
• /
• pp.11-19
• /
• 2008

The layer technique is to produce many memorable scenes by generating layers of new experiences on the existing ones as it is adding the cognitive layers on to the visually seen landscape. Its need is high for places whose landscape itself influences perception, value or expression and which determines the spatial and quality standards. The existing floor plan-based design methods have failed to be useful in generating complex visual experiences. In order to maximize the aesthetical landscape experiences in landscape planning, cognitive layers are needed which complement the input of adequate cognitive elements and the inter-element relationships. Here, layers are utilized to change the arrangement of the landscape elements and coordinate the cognitive flow so that the images could be connected and imagination could occur. A case in point is Anhyun Village in Gochang where physically distinctive layers are additionally set to make a visual experience enriching. The new landscape layers discover the fact that it provides diversity in experiencing the village landscape and forming the sense of beauty and that it is deeply immersed into the daily life of the village. Meanwhile, Guwau Village in Taebaek is an example showing the usefulness of various-layer setting in landscape planning in setting effective circulation planning. That is, the bottom line is the spacing-starting where and making it stay where for a few seconds, and the visual layers. It is also critical to encourage inducing circulation so that layers of the senses stimulating five senses could intervene. Lastly, Mulgeon-ri in Namhae is a case which directly made a parallel of the physical layers of the landscape composition and the cognitive layers of the landscape experience. Artificial landscape planning is mostly about manipulating of visual traits that people feel beautiful, but the layer technique is linked to how to make experiences enriching and renewed.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.78-91
• /
• 2024

Double steel plate concrete composite shear wall (SCSW) has been widely utilized in nuclear power plants and high-rise structures, and its shear connectors have a substantial impact on the seismic performance of SCSW. Therefore, in this study, the mechanical properties of SCSW with angle stiffening ribs as shear connections were parametrically examined for the reactor containment structure of nuclear power plants. The axial compression ratio of the SCSW, the spacing of the angle stiffening rib arrangement and the thickness of the angle stiffening rib steel plate were selected as the study parameters. Four finite element models were constructed by using the finite element program named ABAQUS to verify the experimental results of our team, and 13 finite element models were established to investigate the selected three parameters. Thus, the shear capacity, deformation capacity, ductility and energy dissipation capacity of SCSW were determined. The research results show that: compared with studs, using stiffened ribs as shear connectors can significantly enhance the mechanical properties of SCSW; When the axial compression ratio is 0.3-0.4, the seismic performance of SCSW can be maximized; with the lowering of stiffener gap, the shear bearing capacity is greatly enhanced, and when the gap is lowered to a specific distance, the shear bearing capacity has no major affect; in addition, increasing the thickness of stiffeners can significantly increase the shear capacity, ductility and energy dissipation capacity of SCSW. With the rise in the thickness of angle stiffening ribs, the improvement rate of each mechanical property index slows down. Finally, the shear bearing capacity calculation formula of SCSW with angle stiffening ribs as shear connectors is derived. The average error between the theoretical calculation formula and the finite element calculation results is 8% demonstrating that the theoretical formula is reliable. This study can provide reference for the design of SCSW.

• 한국화재소방학회논문지
• /
• 제30권2호
• /
• pp.98-105
• /
• 2016

물류창고 화재위험성은 보관물품, 포장재 및 파렛 등의 가연성과 화재하중 그리고 창고 내부 천장높이, 랙크 등의 저장높이와 배치, 통로 폭 등에 따라 결정된다. 물류창고의 소화 또는 진압대책은 이러한 주요 인자를 고려한 가연물 등급 분류기준을 마련하고 스프링클러설비 설계기준을 적용해야 한다. 본 연구는 국내 물류창고의 자동식스프링클러 적용을 위한 첫 단계로서 경기도 소재 5개 물류단지 내 28개 창고 동을 대상으로 수용물품의 분포 및 창고 공간특성을 현장 조사하였다. 아울러 미국 유럽 및 일본의 물품 분류기준을 분석하였으며 이를 통하여 물류창고 수용물품의 등급분류기준 마련을 위한 기초자료를 제시하고자 한다.

• Steel and Composite Structures
• /
• 제31권6호
• /
• pp.601-615
• /
• 2019

In cold-formed steel (CFS) structures, such as trusses, wall frames and columns, the use of back-to-back built-up CFS angle sections are becoming increasingly popular. In such an arrangement, intermediate fasteners are required at discrete points along the length, preventing the angle-sections from buckling independently. Limited research is available in the literature on the axial strength of back-to-back built-up CFS angle sections. The issue is addressed herein. This paper presents the results of 16 experimental tests, conducted on back-to-back built-up CFS screw fastened angle sections under axial compression. A nonlinear finite element model is then described, which includes material non-linearity, geometric imperfections and explicit modelling of the intermediate fasteners. The finite element model was validated against the experimental test results. The validated finite element model was then used for the purpose of a parametric study comprising 66 models. The effect of fastener spacing on axial strength was investigated. Four different cross-sections and two different thicknesses were analyzed in the parametric study, varying the slenderness ratio of the built-up columns from 20 to 120. Axial strengths obtained from the experimental tests and finite element analysis were used to assess the performance of the current design guidelines as per the Direct Strength Method (DSM); obtained comparison showed that the DSM is over-conservative by 13% on average. This paper has therefore proposed improved design rules for the DSM and verified their accuracy against the finite element and test results of back-to-back built-up CFS angle sections under axial compression.

• 한국수산과학회지
• /
• 제44권4호
• /
• pp.413-422
• /
• 2011

An improved split-beam transducer for a 50 kHz fish-sizing echo sounder was developed. The main objective of this study was to minimize the side lobe level in the beam pattern and the distance between acoustic centers for adjacent transducer quadrants in the geometrical arrangement of array elements while maintaining a given number of transducer elements and beam width. To achieve these goals, a 32-element planar array transducer ($6{\times}6$ array with one element in each corner missing) was designed using the Dolph-Chebyshev shading function to suppress side lobes in the array beam pattern and fabricated by arranging the inter-element spacing to be substantially equal to half the wavelength using the transducer element of 0.4 times the wavelength in diameter. The performance characteristics of this split-beam transducer were evaluated in the experimental water tank of $5m{\times}5m{\times}6m$ (length${\times}$height${\times}$width). In this study, the design goal of the beam width and side lobe level for transmitting a beam pattern was initially set at $21^{\circ}$ and -30 dB, respectively. However, the measured beam width at 3 dB was $21^{\circ}$ in both directions with side lobe levels of -24.7 dB in the horizontal plane and -25.6 dB in the vertical plane. The averaged beam width at -3 dB of the receiving beam patterns for four receiving quadrants was $31.4^{\circ}$. The transmitting voltage response was 161.5 dB (re $1{\mu}Pa$/V at 1 m) at 50.23 kHz with a bandwidth of 2.16 kHz, and the averaged receiving sensitivity for four receiving quadrants was -178.13 dB (re 1 V/${\mu}Pa$) at 49.8 kHz with a bandwidth of 2.64 kHz.

• 전기학회논문지
• /
• 제63권3호
• /
• pp.409-413
• /
• 2014

GIS partial discharge that occurred in the UHF band signal is effectively detected by the method to IEC60270 5pc the apparent minimum discharge can be detected over the GIS arrangement of the sensor interior and exterior of the UHF in accordance with the optimized position signal by considering the damping ratio is selected so that the signals can be obtained to be mounted. 362kV, 800kV GIS is installed on the internal and external sensors are UHF band signal attenuation is set by measuring the reference value, but the operation, 170kV case 362kV, 800kV on the basis of the measurement data and to be installed and operated. When 170kV per 1Bay by installing the built-in sensor 1 for detecting a partial discharge signal, But, GIS signal attenuation is large in the case of an internal partial discharge signal is not detected in some cases. Where the attenuation is great UHF signal of the sensor by increasing the quantity of partial discharge signals were acquired to allow relocation. The greater the spacing between the sensor and the sensor is applied simplifies the installation and reduces the cost in terms of maintenance of appropriate optimal position is calculated to detect the partial discharge signal is needed. Thus 170kV GIS signal power attenuation of a partial discharge by measuring the UHF sensor, and by relocating the proper position is calculated in accordance with the sensor signal decay rate and minimize the error of omission in detecting a partial discharge signal was optimized.