• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.153-160
• /
• 1989

본 연구는 수평전도관과 수평원통 사이의 환상공간에 수직격판이 부착된 경우와 수평직판이 부착된 경우에 Rayleigh수와 무차원 관열전도율을 변수로하여 수직해석과 Mach-Mehnder 간섭계를 이용한 실험으로 자연대류 열전달특성을 연구 하였다.

• Asian Spine Journal
• /
• 제12권6호
• /
• pp.1078-1084
• /
• 2018

Study Design: Prospective observational study. Purpose: This prospective analysis aimed to evaluate the efficacy and bone-bonding rate of hybrid hydroxyapatite (HA) spacers in expansive laminoplasty. Overview of Literature: Various types of spacers or plates have been developed for expansive laminoplasty. Methods: Expansive open-door laminoplasty was performed in 146 patients with cervical myelopathy; 450 hybrid HA spacers and 41 autogenous bone spacers harvested from the spinous processes were grafted into the opened side of each lamina. The patients were followed up using computed tomography (CT), and their bone-bonding rates for hybrid HA and autogenous spacers, bone-fusion rates of the hinges of the laminae, and complications associated with the implants were then examined. Results: Clinical symptoms significantly improved in all patients, and no major complications related to the procedure were noted. The hybrid HA spacers exhibited sufficient bone bonding on postoperative CT. The hinges completely fused in over 95% patients within 1 year of the procedure. Only 4 spacers (0.9%) developed lamina sinking, and most expanded laminae maintained their positions without sinking or floating throughout the follow-up period. Conclusions: Hybrid HA spacers contributed to high bone-fusion rates of the spacers and hinges of the laminae, and no complications were associated with their use. Cervical laminoplasty with these spacers is safe and simple, and it yields sufficient fixation strength while ensuring sufficient bone bonding during the immediate postoperative period.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.128-133
• /
• 2003

In this paper, we have proposed a method by using virtual simulation to calculate the behaviors of spacers to avoid conductor galloping with the hanging composite polymer spacer between conductors on different phases. We have considered with three types of modeling considerations for the analysis of galloping in power transmission lines, such as iced-single conductors without spacer, iced-single conductors with spacers, and iced-two bundle conductors with spacers. In simulation, the finite element method is used to calculate the structural response with geometric nonlinear behavior. The iced conductor is modeled by two beam-element faces with which it is connected. The ANSYS program is applied too. First, the calculation results show that the two beam-element model is very suitable to make a virtual simulation. Second, the amplitude of conductor galloping is reduced after hanged spacers. Third, when number of spacer is increased, the maximum magnitude of natural frequency of iced conductor will reduce. Final, the behaviors of spacers are verified in viewpoint of standard cases.

• 터널과지하공간
• /
• 제21권5호
• /
• pp.377-385
• /
• 2011

본 연구는 록볼트가 크게 인장되더라도 주입재의 인장파괴를 최소화하여 전면접착식 볼트의 지보효과를 극대화 할 수 있는 새로운 개념의 록볼트를 개발하기 위해 수행하였다. 전면접착식 볼트의 거동 메커니즘을 분석하기 위하여 실내모형시험을 실시하였다. 압축성 간격재를 설치한 록볼트를 고안하고, 실내인발시험을 실시하여 간격재의 최적설치간격을 결정하였으며, 실대형 인발시험을 통하여 압축성 간격재를 설치한 볼트의 인발저항력을 측정하였다. 그 결과 압축성 간격재를 설치한 볼트가 기존의 전면 접착식 볼트보다 약 15% 증가된 인발 저항력을 나타내었다.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.323-327
• /
• 2009

The oscillation is very dangerous in bundled transmission lines, besides 4 bundle transmission lines are very weak for subspan oscillations. In some cases, subspan oscillations are continuously occurred in the same subspan. In order to develop the control method of the above subspan oscillation, this paper suggests a method of applying twin spacers to the subspans. We have carried out some tests to analyze the oscillation phenomena after installing twin spacers on 4 bundle overhead lines, and we got a good effect for controling subspan oscillations by installing twin spacers.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.42-51
• /
• 2006

The main purpose of this paper is to calculate the behaviors of inter-phase spacers to reduce the amplitude of galloping in conductors. In simulation, three phases and iced-single/two-bundles conductors with/without spacers are considered in viewpoint of standard cases. The implicit/explicit finite element methods are used to calculate the transient response with geometric nonlinear behavior. The ANSYS/LS-DYNA program is also applied. Calculation results can be used to predict the positions to insert the inter-phase spacers between conductors.

• 태양에너지
• /
• 제8권2호
• /
• pp.66-72
• /
• 1988

Natural convection in a horizontal annulus with spacers has been studied on the effects of diameter ratio and Rayleigh numbers and position of spacers by experimental method. In case of vertical spacers, the local spacer Nusselt numbers show positive values on the lower spacer, but negative values on the upper spacer. In case of horizontal spacers, the local spacer Nusselt numbers show positive values on the upward surface of spacer, but negative values on the downward surface of spacer. The mean tube Nusselt numbers and mean cylinder Nusselt numbers with vertical spacer are increased 10% and 2.1%, respectively by those of horizontal spacer.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.49-54
• /
• 2000

A field emission display has spacers separating the emitting base and display face. The arrangement of the spacer is important for maintenance of required clearance, endurance of bending stresses, and efficient vacuum sealing. Topology optimization technique with material density was introduced to select the best position of the spacers from the available positions. The displacement and Von Mises stress distribution of the panels with optimal spacers were calculated by finite element method. Also the design guide for adding eliminating spacers was proposed.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.437-454
• /
• 2014

The influence of spacers on the behaviour and ultimate capacity of intermediate length CFS open section columns under axial compression is investigated in this paper. The focus of the research lies in the cross- section predominantly, failed by distortional buckling. This paper made an attempt to either delay or eliminate the distortional buckling mode by the introduction of transverse elements referred herein as spacers. The cross-sections investigated have been selected by performing the elastic buckling analysis using CUFSM software. The test program considered three different columns having slenderness ratios of 35, 50 & 60. The test program consisted of 14 pure axial compression tests under hinged-hinged end condition. Models have been analysed using finite element simulations and the obtained results are compared with the experimental tests. The finite element package ABAQUS has been used to carry out non-linear analyses of the columns. The finite element model incorporates material, geometric non-linearities and initial geometric imperfection of the specimens. The work involves a wide parametric study in the column with spacers of varying depth and number of spacers. The results obtained from the study shows that the depth and number of spacers have significant influence on the behaviour and strength of the columns. Based on the nonlinear regression analysis the design equation is proposed for the selected section.

• 한국응용과학기술학회지
• /
• 제16권3호
• /
• pp.255-262
• /
• 1999

The new copolymers which contain flexible spacers in main chain were prepared and their properties were studied. the copolymers were synthesized in the melt polymerization melted from diacetoxynaphthalene isomers, ${\alpha},{\omega}bis(4-carboxyphenoxy)$ alkanes and p-acetoxy benzoic acid in the molar ratio of 1:1:2 and characterized for the effects of structure of naphthalenediol isomer moieties and the spacers on thermal crystalline and liquid crystalline properties of the resulting polymers. Diacetoxy naphthalene isomers were used 1. 5-,1. 6-,2. 6-and 2. 7-disubstituted ones and the spacers was either tetramethylene or decamethylene. The polymer was characterized by elemental and spectropic analysis, differential scanning calorimetry (DSC) on a polaring microscope, wide-angle X-ray diffractometry and thermogravimetry (TGA). There glass transition temperatures (Tg) and melting temperature (Tm) on the structure of the naphthalenediol isomer moieties and the length of the spacers. The presence of spacers was found to the helpful in crystallization of 1. 6-naphthalenediol copolyesters. The presence of amide group in the backbone chain of polymer was found to increase transition temperature, crystallization, thermal stability of polymers but to decreas solubility.